Recommended Trailer Hitch for a 2014 Toyota Prius C

Question

Question:

I would like to tow with an aftermarket towing set up for my Prius C. What do you have and what is the towing capability of these hitches and the set up?

asked by: Jonathan T

0

Expert Reply:

In the owners manual Toyota does not recommend towing a trailer with your 2014 Toyota Prius C, or even installing a hitch. However, if you choose to do so, I can recommend the parts you will need.

We offer two hitches for your 2014 Toyota Prius C, the Class I Curt Hitch # C11484 and the Class I Draw-Tite Hitch # 24889. Both have a towing capacity of 2,000 lbs GTW and 200 lbs TW. However, be sure to consult your owner's manual or contact your Toyota Dealer to see how much GTW and TW your Prius C can tow. Towing more than what your owner's manual recommends can damage your vehicle.

Out of these two hitches, I recommend the Draw-Tite Hitch over the Curt Hitch. This is because all Class I Curt Hitches require the use of stabilizing straps for all non-trailer loads (like bike racks) to stay within their warranty limits. The Draw-Tite Hitch uses an easy bolt-on installation, no drilling or welding is required to install this hitch on your vehicle. A pin and clip is included with this hitch which you will need when towing. I attached an installation video of this hitch on a 2014 Prius C you may want to check out.

To complete your towing set up you will also need a wiring harness, hitch ball and ball mount.

For a wiring harness I recommend the Curt Custom Fit Vehicle Wiring Harness # C56275. This harness provides a 4-way flat trailer connecter at the back of your vehicle to power your trailer's signal lights. We have installed this wiring harness on a 2014 Prius C and I attached the installation video for you which you may find helpful.

For a ballmount, I recommend the Sportframe Ballmount # 3593. This ballmount is the recommended ball mount for your hitch and has a 2-1/8" Rise or 2-3/4" Drop. For a hitch ball I recommend the Tow Ready Hitch Ball with a 1-7/8" Diameter and Short Shank # 19256.

I also attached help articles on everything you need to tow a trailer and installing a trailer hitch which you may find helpful. I also attached a help article on how to clean the weld nuts you will use to install your trailer hitch for a smooth installation.

expert reply by: Sarah H

0

Answer 1

The part you need is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part #Y06179.

view full answer...

Answer 2

We do have Class I hitches confirmed to fit your 2014 Toyota Prius C, including Curt hitch #C11484, that you can see on the linked page. We do not have a hitch part 35799. I recommend the Draw-Tite #24971 over the Curt hitch since it does not have…

view full answer...

Answer 3

You are correct, the Draw-Tite Sportframe Trailer Hitch Receiver, #24971, has been confirmed to fit your 2014 Toyota Prius c.

view full answer...

Answer 4

That's a good question, and between the Curt Trailer Hitch Receiver #C11484 and the Draw-Tite Trailer Hitch Receiver #24971 that fit your 2012 Toyota Prius C, the best option is definitely the Draw-Tite #24971. The reason the Draw-Tite is…

view full answer...

Answer 5

In order to carry 2 bikes on your 2013 Toyota Prius c, one of which is a 57 pound electric bike, you will need to install a trailer hitch and use a hitch mounted bike rack. The Saris Freedom, #SA4412B, is a hitch mounted bike rack, it is compatible…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...