Draw-Tite and Curt Trailer Hitch Comparison for 2016 Mazda CX-5

Question

Question:

Hi, I am getting ready to order a hitch from you guys and I am deciding between the Çurt and Hidden Hitch. Aside from curts smart request to use a strap for bike racks is there any other difference to weigh before deciding? The Curt appears to be about 6 pounds heavier, does that mean better construction? Does the hidden hitch actually sit back under the bumper a bit more than the curt or is the exposure identical? Thanks!

asked by: John

0

Expert Reply:

Both the Curt Hitch Class III Reciever # C13315 and Draw-Tite Class III Reciever # 76138 are confirmed to fit on your 2016 Mazda CX-5. Both receivers are basically identical as they have the same weight bearing capabilities and install in the same manner.

If you are interested in using your hitch for towing, you will need a hitch ball, ball mount and pin and clip. I recommend the T-One Vehicle Wiring Harness # 118563 and our hitch ball mount kit # 989900 which comes with two hitch balls, two ball mounts and a pin and clip.

I have attached a review video of the ball mount kit, an installation videos of both hitches on a CX-5 and review video of the Wiring Harness you may want to check out.

expert reply by: Sarah H

0

Answer 1

The best way to determine which model Mazda CX-5 you have is to simply visit your local Mazda dealer and provide them with your VIN. They will be able to take this information and tell you exactly what model you have and anything that was installed…

view full answer...

Answer 2

Curt requires the Support Strap #18050 with a number of their hitch receivers like #C11407. The strap isn't required when towing a trailer but only when carrying something like a bike rack or cargo carrier. It's required in order to be…

view full answer...

Answer 3

You do not have to use a stabilizer strap with the Draw Tite hitch part #e98902 that you referenced. At one point the lower capacity Curt hitches did require the strap but here recently they decided that wasn't needed any longer. So if you wanted…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The stabilizing straps are a warranty requirement that Curt recommends to help support the hitch. The strap reduces some of the tongue weight load on the hitch, reduces the tendency for attached items to move around while the vehicle is in motion,…

view full answer...

Answer 6

The Curt 2" Trailer Hitch Receiver #C13315 is an excellent option for your 2019 Mazda CX-5 and really the only other option available that I would recommend above it is the etrailer.com 2" Trailer Hitch #e98902, and that is only due to the…

view full answer...

Answer 7

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...