To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Circuit-Protected Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
This converter safeguards itself and your vehicle against possible electrical shorts and overloads with integrated short circuit protection. Just install the connector as indicated and rest assured that the wiring system of your vehicle will remain feedback-free.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (80 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.
The mechanic was going to charge me $252.00 for a two hour job. That's about what my lawyer charges. I mean a good mechanic is worth his salt; of course, I'm going to pay. Idon't know know what I'm doing.
However, the DIY video I found on etrailer made the installation look so easy I thought I'd give it a try, and save $252.00 I tried, nearly failed, unable to disconnect the connectors. But if you wedge a screwdriver head in the side of the connector, the darn thing pops right out. I didn't see that on the video. Then on the other side the darn thing popped right out on the first try. I nearly fainted.
A year ago I purchased this harness and it was easy to put in and worked great.
Replaced a failed unit of another brand. The Tekonsha unit seemed to be of higher quality. Excellent instructions made for a simple installation. Another trusted product from etrailer.com.
Chuck
10/8/2022
After a year, the unit is still functioning perfectly. My vehicle is stored outside, closed up in hot, sunny summers, freezing in frigid Minnesota winters. The Tekonsha unit continues to do its job, perfectly.
As with all of the items we have ordered from etrailer this harness continues to serve us well. With four Santa Fe's (2002,2003,2007,2011) in the family we have installed harnesses in all as well as hitches. They all went in easily enough and etrailer's installation videos were of tremendous help in simplifying the tasks.
Randall H.
6/1/2020
It still serves us well, over thousands of towing miles, thank you!
Both the Trailer Hitch and the Wiring Harness were easy to install..averaged about 40 minutes each.Every thing worked just fine.
Mexican D.
4/24/2022
Good! Easy to install thanx to your instruction guide.
Usiong the online video provided by etrailer helped immensely. While not specific to my vehicle (2012 Ford Explorer) the 2013 model used was extremely close. There were some questions that arose as the video covers installation on a factory installed towing package, but the folks at etrailer's customer service group were more than helpful in researching and coming up with the needed answers/information. Brake controller works great!
My harness was delivered fast. The instructions where clear and easy to follow. I had mine installed in no time, and it continues to work well as of today. The construction was far better that I expected. I would buy this product again. Thank you etrailer.com for a great product!
Darrell
10/3/2020
Its still works great after a years uses. I would buy this again if needed.
It’s a good hitch but it didn’t fit perfectly an it hits the exhaust pipe so every time I turn on the car it rattles sometimes because the pipe hits the hitch
I installed this hitch about a year ago. Following the available video's made it pretty easy and I'm not really that mechanical. The wiring harness was also pretty straight forward. Overall, it has functioned perfectly. Does what a trailer hitch is supposed to do. The bottom line is this is much cheaper to buy directly and install yourself than to have someone else do it. Would definitely recommend.
Great wiring harness. Easy to install. Just clips on. No soldering or wire cutting. Exactly what I needed.
Hyundai Elantra Touring 2012: Piece of Cake to install. Took Just about an hour. Loved the T-Connectors, made the install very simple. No need to splice into wires!!! Did not have to pull out the cargo side panels completely, just enough to get access to the rear light wiring harness. Will be using it to tow a utility trailer. Thank You !!!
Got it exactly when I was supposed too. So very easy to install. Maybe 15 minutes to disassemble the back it the Santa Fe. Five minutes to install the harness and 10 to reassemble. Plugged into the trailer and jackpot!!! Running lights , break lights and turnsignals. So happy I found your product on YouTube!!! Awesome!!! Thanks for the great service and product!!!
Very good product. I used etrailer you tube video for installation. Works like a charm.
Bjoern S.
5/1/2014
Still working great. I can say with the help of the you tube video this product is easy to install and holds up, even after everyday use.
I have to say..... went perfect. Ordered the tow package and wiring for a 04 Hyundai santa fe and I was ready to have someone install it. Watched the video that came with my order and two hours later I was completely done.
Way to go etrailer.
Very simple to install. Your installation video was a great help!
Rob L.
5/5/2016
Everything is working great Rachael. ... we tow the trailer quite often and have never had any issues with either the hitch or wiring harness... I would highly recommend etrailer to anyone for prompt quality service and parts.
Hitch was packaged great, very clear instructions, no missing fasteners, easy install. The trailer light kit also purchased went on without a problem. All worked well.
etrailer.com is great. Tell them what car you have and they have the right hitch. It was delivered as promised, it fit perfectly and the installation videos are thorough and accurate. No surprises, no uh-ohs.
Buy it from them.
Easily installed. Was a pain removing all the panels to get access to the on-board harness, but not difficult. I basically started at the back of the vehicle and only removed what I needed to, which was right up to the LATCH hooks in the cargo area. I consider this to be a "plug-and-play" system. Works great right out of the box.
Left off the 5th star because a. Said one one push stud at back of mat in the video & b. The controller module had no self adhesive back and no screw to mount it with.
Other than that - Customer service, price and assistance were First Class. I wouls rate them 9 out of 10 rather than 4 out of 5, but that option was not available.
This wiring harness works well for my 2011 Hyundai Touring. There's a lot of removing trim in order to get to the wires, but it wasn't difficult, just takes time.
Quality wiring harness. The wire gauge is heavy duty and it is easy to install once you get all of the trim pieces and interior panels opened.
Installed fine on my 05 Hyundai Santa Fe. Watching both videos helped with the installation. I also was sure to use the Loctite dielectric grease.
This wiring harness for my Elantra Touring installed just as the write up on said it would, no suprises. It does take some time as panels have to be opened up to make the connections, but it works perfectly.
I have bought several different harnesses for our Hyundai Santa Fe's 2002 2003 2007 2011, they are all working great still. Easy enough to install.
Watched the video a few times because I am not a body repair person. Anyway it went smooth as silk and about an hour later everything is looking good. The etrailer.com crew is great with the fast delivery, great videos, super good help. the parts are good to.
Do you have a question about this Custom Fit Vehicle Wiring?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Myron
1/7/2024
Still working after a year. Great product. No complaints.!