Replacement Hardware for Curt Class III Hitch 13534 for a 2009 Toyota Highlander

Question

Question:

Do you sell just the hardware for the Curt class III hitch for a 2009 Toyota Highlander? If so, how much?

asked by: Scott

0

Expert Reply:

Good news. We do sell just the hardware for the Curt Class III Hitch # 13534.

The replacement hardware kit part number you will need is # RHK. On this page, which I've attached to this page for you, will have a box where you will need to enter in the hitch item number which is 13534, and then select the manufacture Curt from the drop down box, then add to cart. The price for the item will be listed on this page for your convenience.

expert reply by: Jackie C

0

Answer 1

The install hardware of the Curt hitch #13534 are Grade 5 steel bolts in the size of M10x1.25. They are zinc coated.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The torque specs for the Curt Trailer Hitch Receiver #13534 (that fits a 2008 - 2013 Toyota Highlander) can be found as step 5 on the second page of the attached installation instructions. Sometimes manufacturers might swap hardware out so that the…

view full answer...

Answer 4

For your Curt #13534 hitch I have included a link to the installation instructions which give a complete description of the mounting hardware sizes, quantities, and qualities. Most neighbors find it easiest to order our etrailer #RHK kit that comes…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 10

Any time the vehicle is placed in reverse, whether you are towing or not, the alarm will sound. You will have to make sure that yellow wire is connected to a reverse light wire on the vehicle in order for the alarm to function.

view full answer...

Answer 11

Suspension enhancement can be used with your weight distribution and will help with rear end sag. So the #CSS-1145R that fits your 2008 Toyota Highlander would help. You'll need to set your weight distribution up again.

view full answer...

Answer 12

We do sell replacement hardware for all of the hitches we carry with the part #RHK but you might check down in the hitch tube to see if the hardware is taped up in there as that's sometimes where it's stored in shipping.

view full answer...

Replacement Hardware for Curt Class III Hitch 13534 for a 2009 Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching