etrailer Class III Trailer Hitch Installation - 2023 Nissan Rogue Video

In order to use the Hollywood Racks Sport Rider SE #HLY84FR with your Lectric Step Thru Bikes, you likely will need to use an adapter bar #HRBA-PRO. This way the hooks will have something to connect to. Otherwise the hooks would not go low enough…

The hands-free liftgate on your 2023 Nissan Rogue will still be functional after installing the etrailer Trailer Hitch Receiver #e93ZR. You'll need to kick your foot to either side of the 2 inch receiver, but it will still activate. I also wanted…

I would be happy to! To add a hitch to your 2024 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I reached out to my contact at Curt Manufacturing about the Curt #C24HR hitch for the 2021 Nissan Rogue and what possible issues there may be with the operation of the liftgate sensor or the rear distance sensors. They told me that those Rogue…

I do have a solution for you, however the etrailer.com Trailer Hitch Receiver #E98841 that you referenced is only designed to fit the Sport model of your 2014 Hyundai Santa Fe. For your Santa Fe Limited I instead recommend the Draw-Tite Max-Frame…

The etrailer.com Trailer Hitch #E98841 does fit your 2014 Hyundai Santa Fe Sport with a spare tire, though it can be tricky in order to get it back into position. You (or your friend) may need to angle the tire in and out, and use a bit of force to…

You will not have to extend any of the wires on your 2023 Nissan Rogue to install the Curt 4-Way #C44ER. This kit connects in line of the factory tail light wiring and includes a separate wire to connect to the vehicle battery to prevent excess power…

Converters are required when a vehicle has what is called a 3-wire or separate lighting system. These systems will have turn signal circuits that are separate from the brake light circuits. Trailers use a 2-wire or combined system meaning the brake…

The two self tapping screws included with the Reese Multi-Plug Wiring Harness part #74682 will allow you to attach the trailer connector directly to your trailer hitch if needed but I don't really recommend this as you can weaked it and increase…

Here's what I'd recommend. If you have an exposed portion of the hitch crossbar to work with, use the #18136 no drill bracket. This fastens to the hitch crossbar using an included pipe clamp. You'll also use the #PK12711U 7-way mounting…

The Replacement FootBase for Thule Tracker #753-2149 is what you currently have on the Thule tracks on your Leer shell. This footbase is for the now discontinued Thule Tracker square bar setup. You may be able to piece this system together even…