Will Curt Trailer Hitch C11281 Fit a 2015 Dodge Dart GT

Question

Question:

Im looking at installing the trailer hitch on a 2015 Dodge Dart GT but I was wondering if it works with the rear diffuser that is on the car.

asked by: Travis A

0

Expert Reply:

I checked with Curt and trailer hitch # C11281 fits all styles of the 2015 Dodge Dart including the GT.

If you want to use the hitch for an accessory such as a bike rack or cargo carrier, then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. I have included some links to the Class I compatible bike racks and cargo carriers for you.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

An ST205/75R14 tire with a load range D would generally have a maximum weight capacity of 2,100-lbs at 65 psi. For example, the Karrier Radial Trailer Tire, Item #AM10235, has a maximum load capacity of 2,040-lbs at 65 psi. Each tire can have a…

view full answer...

Answer 8

The most important thing to note when determining how heavy a trailer your Dodge Dart can tow is that you will always be limited by your weakest component. This means that if the Draw-Tite Class I Hitch #24890 features a 2,000 pound towing weight…

view full answer...

Answer 9

I've attached the instructions for the Pacer Performance 3rd Brake Light Logic Module #PP20-702 but you'll need to connect the yellow wires to both the left and right turn signals, regardless of where you attach the logic module. Since this…

view full answer...

Answer 10

Mod wheels such as the one in tire and wheel combo #LHACK121 have the distinctive round holes. A "regular" trailer wheel on the other hand has more triangle shaped holes and is referred to as a "spoke" wheel. Take a look at…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C11281 that you mentioned is a confirmed fit for your 2013 Dodge Dart with the Rallye chassis. What likely happened is that it got bent during the shipping process. You can certainly try to bend it back on your own,…

view full answer...

Answer 12

The trailer hitch we offer with the most ground clearance for a 2013 Dodge Dart is the Curt Trailer Hitch Receiver part #C11281. The receiver tube will sit just directly below the rear bumper fascia so you only really loose a few inches of ground…

view full answer...