Recommendation for 10 Inch Drop Ball Mount for 2-1/2 Inch Hitch Receiver

Question

Question:

I am looking for a 10inch and a 2 1/2 receiver for my 2013 ram 2500 does anybody make them yet Im tired of the reducer that I have on my truck now

asked by: Nicholas M

0

Expert Reply:

I have a solution for your ball mount needs; I recommend the Flash Strong Solid Steel 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K # FA49-00-5925.

The 2-5/16" hitch ball on this has a 20k capacity which is the most of any ball mount with the drop you need. To lock this ball mount to your hitch and the platform to the mount use part # FA86-00-4225.

expert reply by: Jackie C

0

Answer 1

Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…

view full answer...

Answer 2

B&W designed their Companion 5th wheel hitch with adjustable pivot arms for exactly the reason you describe. The pivot arms in the Ram OEM 25K version hitch #BWRVK3600 can be adjusted for both height and front-to-back position so that your…

view full answer...

Answer 3

Since you have a narrow nose trailer and a long bed 2014 Ram 3500 I'd go with the forward most position for the pivot arms as that spreads the weight of the trailer up to the front axles a bit more which will help with traction for braking and…

view full answer...

Answer 4

For your Flash Solid Steel HD Adjustable 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K #FA49-00-5925, you will want the Hitch Lock and Adjustment Pin Lock Set for 2-1/2" Flash Solid Steel HD Adjustable Ball Mounts…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Recommendation for 10 Inch Drop Ball Mount for 2-1/2 Inch Hitch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching