Troubleshooting No Power To Brake Controller After Installation for 2013 GMC Sierra
Question:
I hooked it up according to instructions and watching video and its not working. Any suggestions??? Thanks!
asked by: Bill B
Expert Reply:
I recommend reviewing the installation steps. I have attached a help article on installing a brake controller in a 2007-2013 GMC Sierra for you. This article goes through the installation steps.
If the controller is not getting power, I recommend checking the 30 and 40 amp fuses for the brake controller to make sure they are there and are functioning properly. I also suggest making sure the wire for the brake controller power and the wire for the 12V power lead are connected to the battery. The brake controller wire connects to the M6 stud and the 12V wire connects to the M8 stud.
If the wires are not connected, you will want to connect them to the appropriate studs. The brake controller wire is located directly to the right of the power distribution box, and will be taped to a wire harness between the driver-side fender and the box. The 12V wire is located to the left of the box and is taped to a wire harness under the power brake booster.
I have also attached a help article on troubleshooting brake controller installations. If this does not provide a solution for you, please let me know and I will be happy to provide further troubleshooting steps.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Trailer Brake Controller Installation - 2013 Chevrolet Silverado 90195
- Q&A: Troubleshoting 2013 GMC Sierra 3500 Brake Controller Not Working with Brake Pedal
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: Troubleshooting No Power on the Blue Brake Output Wire from a Brake Controller
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: No Power to Brake Controller on a 2012 GMC Sierra
- Article: Troubleshooting Brake Controller Installations
- Shop: Brake Controller
- Shop: Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches and Gooseneck Adapters - Qty 4
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Q&A: Troubleshooting Voltage Output from Electric Brake Controller on 2017 Chevrolet Silverado 2500 HD
- Q&A: Can Hopkins VueSMART Wireless Backup Camera Use iPad Instead of Smart Phone?
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Review of Curt Fifth Wheel - C16902
- Q&A: When Truck is Put in Reverse the Trailer Brakes Lock Up
- Q&A: Troubleshooting Overheating Trailer Tires on a Tandem Axle Trailer
- Article: Trailer Wiring Diagrams
- Search Results: aluminum storage box
- Search Results: aluminum storage boxaj1
- Video: Trailer Brake Controller Wire Testing
- Shop: Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Shop: Better Bath RV Kitchen Sink - Single Bowl - 14" Long x 10" Wide - Stainless Steel
- Video: Trailer Brake Controller Installation - 2011 GMC Sierra 90195
- Video: Trailer Brake Controller Installation - 2013 GMC Yukon 90195
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Testing Brake Controls