Can Hopkins VueSMART Wireless Backup Camera Use iPad Instead of Smart Phone?

Question

Question:

can a ipad work instead of a smart phone?

asked by: Bill S

0

Expert Reply:

The Hopkins VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View # HM34FR can absolutely use an iPad for the monitor. It connects via WIFI to any Android or iOS device with WIFI capability.

expert reply by: Jason S

0

Answer 1

The wireless Hopkins VueSMART RV and Trailer Backup Camera #HM34FR does have bulit-in WiFi which is why you do not need internet access; it is a 2.4 GHz frequency. I have added a link to a video review for you to check out as well of the Hopkins…

view full answer...

Answer 2

To determine why you do not have any power on the blue brake output wire, I recommend starting at your brake controller. First, make sure the brake controller is on and receiving power. Most brake controllers have 4 wires, blue (brake output to…

view full answer...

Answer 3

Do you have the 12 volt power wire from the wiring harness attached to the fuse box post via a ring terminal? The ring terminal for brake controller power is located directly to the right of the power distribution box. It is taped to a wire harness…

view full answer...

Answer 4

The voltage at your 5 o'clock plug on your 7-Way trailer connector like #HM40975 should be between the 0.9 you are getting and 12 volts. Test this plug with an incandescent circuit tester like #PTW2993 because it will have a draw on the wire that…

view full answer...

Answer 5

I recommend reviewing the installation steps. I have attached a help article on installing a brake controller in a 2007-2013 GMC Sierra for you. This article goes through the installation steps. If the controller is not getting power, I recommend…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

For your 2007 Ram 3/4 ton, I'd recommend the Curt #C31017 which would mount to the underside of the frame members and would have the receiver tube sitting directly under the front bumper. I spoke with my contact at Draw-Tite who confirms that…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...