Can Dutton-Lainson Boat Trailer Roller Bunks Attach Directly to a Wooden Bunk

Question

Question:

i have a bunk trailer that I want to mount these rollers on to. Do I need anything else to be able to mount them directly on the bunks or does it come complete with the rollers?

asked by: Jim

0

Expert Reply:

The Dutton-Lainson roller bunks # DL21741 can be attached directly to a flat wooden bunk. All you would need is the hardware appropriate for your particular wooden bunks which you can obtain locally at a hardware store. Considering it is for marine applications I recommend galvanized hardware to match the base material of the roller bunks.

expert reply by: Michael H

0

Answer 1

Yes, you could convert your Rolco trailer from the wooden bunks to roller bunks. The Boat Trailer Deluxe Roller Bunk, part #DL21741, has a universal mount system that attaches directly to either vertical or horizontal positioned bunk boards that…

view full answer...

Answer 2

Yes, you can attach roller bunks in place of wooden bunks like with the part #DL21741 as the brackets of both designs are the same typically. I attached a review video for the roller bunks for you to check out as well.

view full answer...

Answer 3

Yes, you can use two sets of the Dutton-Lainson deluxe roller bunks #DL21741 for your 6,000 pound 23 foot Boston Whaler as long as each pair isn't supporting more than their 3,000 pound weight capacity. The capacity for a set of Dutton-Lainson…

view full answer...

Answer 4

You are correct, you can mount the Boat Trailer Deluxe Roller Bunks, item #DL21741, directly to the top of your existing wooden bunks. If mounted in this fashion you would not need any brackets. I would recommend stainless steel mounting screws,…

view full answer...

Answer 5

What I recommend is to use 2 sets of the roller bunks #DL21740. Two bunks can cover the length of one bunk but you will need to trim one to fit. One set would be needed per bunk and then trimmed to fit. One roller bunk alone is 4 feet long. Normally…

view full answer...

Answer 6

The weight ratings for roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections #DL21741 are interesting as it was explained to us that the capacity listed (3,000 lbs) is the max weight that the boat can be…

view full answer...

Answer 7

A couple sets of the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 will drastically help with getting your pontoon boat on and off the trailer smoothly and easily as there isn't any friction…

view full answer...

Answer 8

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…

view full answer...

Answer 12

The Repair Kit Fulton Wedge-Latch Cast Head Coupler, #F670801, is designed to fit the coupler #BD44125W0317 which does take a 2-5/16 inch ball.

view full answer...

Can Dutton-Lainson Boat Trailer Roller Bunks Attach Directly to a Wooden Bunk

Product Page this Question was Asked From

Continue Researching