Camper Tie Down System Availability

Question

Question:

There is a product I am told, apparently manufactured by Draw Tight. I have a Truck Camper and the part in question is either bolted or welded on the truck box, not the cab, near the top, on both the drivers and passenger side and to which you hook into the hole your turnbuckle and then up to your truck camper. It basically replaces the belly bar. What can you tell me

asked by: Mike B

0

Expert Reply:

It sounds like you are talking about the Torklift camper tie downs as they install and operate just like what you described.

In order to pick out the correct ones you will need to follow the link I attached where you can enter your vehicle info and the correct tie-downs will be listed.

expert reply by: Jameson C

0

Answer 1

The TorkLift Custom Frame-Mounted Camper Tie-Downs, front, #TLC2204, and rear #TLC3206 are for the 8' bed HD Models of the Chevy/GMC 2500 and all 3500 versions, including regular cab, extended or crew cab configuration with either SRW or DRW. The…

view full answer...

Answer 2

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 3

For a 2002 GMC Sierra 3500 Dually 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLC2205 and the TorkLift Custom Frame-Mounted…

view full answer...

Answer 4

Yes, the Torklift Class V hitch part #TLC1205 would be a great option for your 2002 Chevy Silverado 2500HD long bed. If you instead had a short bed truck you would want the part #TLC1204. The 17k capacity is more than what your truck is rated for so…

view full answer...

Answer 5

Thanks so much for that info, and we do have camper tie-downs for your 2008 Chevy Silverado 3500 (including the dually models) Crew Cab with a long bed, factory hitch and no running boards. I verified with TorkLift for you that the correct tie-downs…

view full answer...

Answer 6

There are quite a few option on the fit guide when it comes to camper tie downs, more than likely it is working correctly. The fit guide narrows down the correct part using your year, make, model, bed length, step or no step under bed and hitch type,…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...