Heavy Duty 17k Capacity Torklift Hitch for 2002 Chevy Silverado 2500HD

Question

Question:

I bought a curt class v hitch for my truck and it has bent. I need something better. I see 2 tork lift models available for my 2002 silverado 2500hd. My trailer gwvr is 16k. Would the model rated for 17k suffice ?

asked by: Matt M

0

Expert Reply:

Yes, the Torklift Class V hitch part # TLC1205 would be a great option for your 2002 Chevy Silverado 2500HD long bed. If you instead had a short bed truck you would want the part # TLC1204.

The 17k capacity is more than what your truck is rated for so it would be more than adequate.

expert reply by: Jameson C

0

Answer 1

The correct rear Torklift tie downs you need for your 2008 Chevy Silverado 3500 are the part #TLR3503 since you have the Torklift hitch #TLC1205.

view full answer...

Answer 2

The TorkLift SuperHitch Magnum Trailer Hitch #TLC1205-30 that you referenced has been confirmed as a fit for your vehicle so it would be a great choice as it has a ton of capacity like you said you needed. Maximum gross trailer weight: 20,000 lb…

view full answer...

Answer 3

I would agree with your assessment that the Superhitch Magnum 30k part #TLC1205-30 is overkill from a weight capacity point of view and the Original part #TLC1205 is more closely rated to what your vehicle is equipped for. Beyond that the Magnum…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The #TLC3205 you have now is only designed to work with the factory hitch. Whether it is the #DT45517, a Curt hitch, or even a TorkLift hitch you will need a different rear tie-down. The correct rear tie-down for a 2002 Silverado 2500 without a board…

view full answer...

Answer 9

Yes, the Torklift Class V hitch part #TLC1205 would be a great option for your 2002 Chevy Silverado 2500HD long bed. If you instead had a short bed truck you would want the part #TLC1204. The 17k capacity is more than what your truck is rated for so…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes! I went ahead and attached the installation instructions of the Demco Underbed Rail and Installation Kit #DM8551004 (Demco part 8551004) to this answer.

view full answer...

Answer 12

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Heavy Duty 17k Capacity Torklift Hitch for 2002 Chevy Silverado 2500HD

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching