Reese Weight Distribution Snap up Bracket Recommendation

Question

Question:

Is there 3 holes in the bracket? Excluding the sqare head bolt. Do you discount sell as a pair? Can I order more safety pins? I cant find them.....

asked by: Dan W

0

Expert Reply:

If you chose to drill into the frame of your trailer to install the # 58392 there are two holes that the bracket has for that purpose.

A better deal would be to order the part # RP6637 that is these brackets sold in a pair, plus an additional lift bar. For extra safety pins you would want Reese Replacement Clips for Weight Distribution Uplift Brackets, part # 58029.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture! We do have a replacement option for you. You will want the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems item #58392. This works with Reese weight distribution systems with a tongue weight…

view full answer...

Answer 2

view full answer...

Answer 3

The higher capacity Reese WD systems we carry do have the heavy duty brackets part #58392. For example the Reese WD System part #RP66131 has the heavy duty brackets. To answer your other question, yes the #58392 does include the set screw and safety…

view full answer...

Answer 4

The Replacement Heavy Duty Snap-Up Bracket #58392 does not require drilling to install as it basically can set on frame members that are up to 2-1/4 inches in width and uses a set screw to secure instead.

view full answer...

Answer 5

To replace the bracket for your Reese Pro Series Weight Distribution system with an 800-lbs tongue weight you'll want to use the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems #58392. This is the bracket for systems…

view full answer...

Answer 6

The regular snap-up brackets can bend if the hitch weight is higher than what they are rated for. At 800 to 1,000 pounds, your trailer tongue weight is within the limits of Reese dual-cam systems so it should not be a problem. The heavy duty…

view full answer...

Answer 7

I cannot recommend you use Blue Ox chain hangers with your Reese weight distribution system. You would need snap up brackets like the part #58392.

view full answer...

Answer 8

9 inches of ground clearance will be adequate for most situations. If you need the drop that the part #17120 provides to tow your trailer level that would be the priority over ground clearance. This shank does not drop down too far so there…

view full answer...

Answer 9

There are some of the older gold arms available as replacement parts. I recommend the Replacement Cam Arm Assembly for Reese Dual Cam Classic - Gold #RP58460 for your current system if you need the replacement bracket the arm fits into. The…

view full answer...

Answer 10

Sounds like you are looking for the thread forming screws that hold the Reese Dual Cam part #RP26002 to the trailer frame which for that you'd need the part #58437 and you'd be set.

view full answer...

Answer 11

If the snap-up brackets are too far worn on the Strait-Line Weight Distribution System then they will need to be replaced for which we offer the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems part #58392.

view full answer...

Answer 12

While snap up brackets like the Replacement Hook Up Brackets for Curt Weight Distribution Systems #C17208 are somewhat interchangeable, I would still recommend using like branded brackets. The Pro Series weight distribution hitches are manufactured…

view full answer...