Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 18" wide brackets with a 5/8" diameter shaft.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part #yr18244-165ec. This is a Yates keel roller for boat trailers. This keel roller is constructed of a heavy duty rubber. Does have the heavy duty nylon bushings on both ends. This keel roller is designed to replace one of the keel rollers on your boat trailer. The keel roller will ease the loading and unloading of the boat and it will support the bottom of the boat as it sits on the trailer.
It will also help to absorb any road shock while the boats being towed. This product is made in the USA. We're going to do a couple dimensions for you. The overall length of this roller is 17 3/4 inches long and the diameter, its 3 3/4 inches diameter. This keel roller is designed to fit on an 18 inch wide bracket with a 5/8 inch diameter shaft.
And that should do it for part #yr18244-165ec.
Average Customer Rating: 4.7 out of 5 stars (79 Customer Reviews)
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 18" wide brackets with a 5/8" diameter shaft.Hi Etrailer.
What happened to George who wrote me about this about a year ago. Anyway you will figure it out.
This has been a slow project because I am an old retired guy living on a surfing beach way down in Mexico. I brought all the parts from you down in my truck about two years ago. All the parts came from you and the steel and paint I bought here in Mexico. I built the trailer in my shop here and had to modify it several times to fit the strange requirements we have for launching off the beach with waves. I never seem to remember to take the camera or my phone to the beach to show that procedure but it is a little involved compared to a tilt trailer on a boat ramp. If I back the trailer into the water the wave action washes the sand out from under the trailer tires and the quad tires and them I am stuck. I have to launch in the hard sand just inland from the waves and parallel to them. The trailer can only tilt until the rear cross member is just above the sand or I cannot pull the trailer out from under the boat with the 500 lb. Honda 4WD quad. We put pieces of 2 inch black irrigation plastic tubing about 6 feet long under the boat as it is coming down off of the trailer as it is pulled out. This gives us old guys the chance to push the boat 90 degrees until it faces the waves. We wait for some larger waves to roll up under the boat and then we push it into the water and away we go when we find a lull in the incoming waves. We use the boat to get to surfing spots and then fish on the way home. The trailer pictures I am sending are showing the tilt stop that is not quite in use as I am just running the engine in my drive way. The fat little tires are for the sand.
If this project is of interest to you I have some pictures showing the construction of the trailer that better show some of your hardware. I will also try to remember the camera the next time we launch. Our waves are bigger in the summer time so we will have to wait for a small surf day to play with the boat.
Everything that happens here in Mexico is slow and there was some spine surgery that also slowed things down a bit. But a year later I am still surfing and playing with the boat.
That's my story and sorry to be so slow.
Dean Aldinger
Casa Margarita
Playa La Saladita
Guerrero Mexico.
I DID NOT RECEIVE THE KEEL ROLLER IN THE BOX WITH THE SHAFTS. DID THIS SHIP SEPERATELY? I DID NOT RECEIVE A SEPARATE SHIPPING TRACKING FOR THE KEEL ROLLER.
Brooke M.
8/9/2023
I will have our customer service team reach out to you about this right away. Thank you for letting us know!
The white insert popped out as soon as it had pressure on it. Even with washers Not good.
The roller arrived just fine. BUT I HAVE NOT RECEIVED THE accompanying 19" shaft. I don't know why they wouldn't be shipped together. When may I expect delivery of the shaft??
Brooke M.
8/9/2023
It looks like your order was split. I will have our customer service team reach out to you about this in more detail!
I needed a replacement roller for my boat trailer and came across the Yates 18"roller
online at etrailer.com. The quality was good according to the information on their website and the price was reasonable. So, I installed it using a Moeller 19"L X 5/8 dia galvanized shaft, 2- 5/8" spacer washers to eliminate side to side play and 2- 5/8 end caps. I works great! Thank you etrailer.
Outstanding product and value. Used on a whitewater raft trailer where these two rollers allow for uploading and loading the raft in remote locations.
Exactly what I had ordered.
Product as advertise -- fits perfect and did the job
The roller works well with the 19 inch shafts. I purchased 3 rollers and they were as advertised, arriving in good condition and ahead of schedule. What was especially great about etrailer.com, however, was the level of service I received from the staff. They shipped the order early, and sent it with a faster delivery than I had paid for, and then they followed up to make sure I was happy with the order. I expect this level of service from the brick and mortar stores I do business with, and it is great to see that level of service carried forward onto the internet. I definitely will order again from this company when I have need for etrailer.com product.
Great product and their webs site has detail about product for the buyer to determine if they have the correct replacement part. A great company to buy from and help is available if you need it
Jcp
10/20/2018
Great produces and great service
Great quality, price and speedy service. You can't ask for more. Bought two lengths of the taper roller, and some of the 4" wobble rollers. All fit well. I refer all my 'handy' pals to etrailer. Thanks, Hal
Good Quality!
It arrived a day early and in great shape. It actually fit on my boat trailer. What I really liked is that they have a great tracking system from getting the order to final destination. Good Job!
It worked great and we're still working fine
All of your products were of very good quality and fit perfectly the first time. Thank you for being genuine. I especially appreciate you selling Dutton Lainson products, as I grew up in Hastings, NE. They are a very good manufacturer.
This is my first time using E-Trailer and very pleased with the quick turn around plus free shipping saved me nearly $30.00. Will be back for more...
We were very pleased to get the 18" roller when we couldn't find it anywhere locally. It arrived in good order and the company was great at communicating with us, since it was on back order. Your tracking report is wonderful to follow!!!
Very sturdy. Quick shipping.
I ordered an 18" keel roller for my boat trailer. It showed up in a timely manner and I fixed the trailer and took the boat out on the water. Couldn't be happier.
The keel rollers that I received work great! The ordering process was simple and the delivery came in a timely manner. If I ever need another set of rollers, I would not hesitate to buy from this company.
Keel roller worked great for my boat trailer . The price was good and shipped to my house. I installed it yesterday. Thanks Clinton
This particular keel roller is 17 - 18 inches long. I could not find the roller in different marinas close to my lake cottage and it was not offered with many companies on the internet. Cost of roller and shipping was reasonable. I received my order in 5 days.
Excellent 18" Keel roller. It arrived on time, in perfect condition.
Thanks for making my purchase a pleasant experience.
has plastic bearings on ends so center is not supported by shaft, if i was using to support keel on heavy boat that might be a concern
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Laura E.
6/24/2017
Dean, thanks for your business and your review. Makes me want to leave my desk job and join all of you! George is still here and is an amazing customer service rep. We wish you the best as you recover from your spine surgery!