Summer Starts Here - Save up to 70%
This 3-1/2" diameter x 1-1/4" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers sturdy support.
Features:
Specs:
Endcaps easily install on the same brackets that your keel, spool or bow rollers are mounted to. Just attach each endcap to the shaft on the outside of the roller bracket, and then secure the endcap in place with a cap nut (or pal nut). Not only do the endcaps provide more surface area for better boat-to-trailer contact, but they also help to keep your boat from being scratched by sharp bracket edges.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part no YR134-4. This is the Yates endcap for boat trailer rollers. This endcap will mount to either a keel roller, a spool roller or a bow roller on your boat trailer and it will provide additional surface area for improved boat-to-roller contact. This part is constructed of a heavy-duty rubber. It is made in the USA and this endcap will install on the same brackets that your keel, spool or bow rollers are mounted to. You will attach each endcap to the shaft on the outside of the roller bracket and then secure the endcap in place with a cap nut or a pal nut.
They do provide more surface area for better boat-to-trailer contact and it also helps to keep your boat from being scratched by sharp bracket edges. I'm gonna do a few dimensions on this, we'll do the overall diameter it's 3 1/2 inches. We'll do the width which is 1 1/4 inches. This endcap is designed to mount onto a keel, spool or bow roller that uses a 1/2-inch diameter shaft. And that should do it for part no.
YR134-4.
Average Customer Rating: 4.8 out of 5 stars (52 Customer Reviews)
This 3-1/2" diameter x 1-1/4" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers sturdy support.Exact part that I needed for my 24yo boat trailer. I wanted to replace my old parts with the exact part that came with the trailer. I could have bought knock-off parts from another site but didn't trust the quality or the sizes that was offered. etrailer had what I wanted. Quick shipment too. Kept me informed of the process of my order.
Fast shipping and exactly what I needed.
great customer service and I will definitely recommend and use again
Efficient service with great communication during the process.
Purchased a pair of these end caps a few years ago. Nut came loose and lost one. These work great to protect the keel from the bracket of my center keel roller. This time I will use a locking nut.
Perfect replacement from my old worn out part.
Got exactly what I ordered. etrailer was the only place I found what I was looking for without ordering from a chinese website. Thank you for doing such a good job, great follow thru and customer service. It's really nice to see that there are still great companies like this in the US, "ones that actually care about the customers " and it shows. Thank you!!
Product does what it should. A pair of these make the bow stop a little wider, and further protects the boat from being scratched by the bow stop roller mounting hardware...
the people on the phone were intelligent and treated me very well. When my purchase arrived it was correct, no shortages or missing pieces. I buy a lot of products through the phone and internet and etrailer did their job well, put me in the happy column.
thanks for the good service.
Satisfactory
Product seemed to be at least as good as original. Installed for one year now with no issues. The real test is time. Would expect this to last 4---7 years.
This piece was missing on my trailer when we bought our boat. Product was perfect, processing and shipping was very fast. Will order again from etrailer.com for any parts I need.
I purchased 4ea Slipper Springs along with set of SQ U bolts and plates. All products were first rate etrailer service was great
Product is high quality and perfect fit for my boat trailer. Parts were delivered on time! Highly recommend Etrailer for your trailer needs.
These parts were an exact match for the original parts. The original parts had hardened like stone and had begun to split and break into pieces. My order was shipped "standard" and I received it quicker than I expected. The price was extremely competitive!
Thanks !
All items ordered were of excellent quality, timely shipped and fairly priced. In fact, their prices were the best!
direct fit replacement.
price very good compared to other suppliers.
on time delivery .
Got my roller assembly in 4 days. Everything went on smoothly. Only took a few minutes to install.
perfect setup for a 3 inch bow roller
Just as described- replacement part as good or better than the OEM part. Seems to be heavy duty not a cheap knock off.
This is exactly what I needed, thanks for making this an easy transaction and fast delivery
Great product, easy to navigate online
I wanted a 3-1/4" diameter end cap, but this 3-1/2" is even better protection. The only issue is that the depth of the nut recess is a little less than my original part. The nut barely has enough threads engaged. I'm thinking of getting a longer bolt.
product was great and the service also
My order was small but trouble free and exactly what I ordered in a timely manner! Will definitely order again when needed! Thanks!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.