Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches
(112 reviews)
Price: $56.01
In Stock
Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches
Item # UF48-979020
Retail:$76.23
Our Price: $56.01
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (112)
- Q & A (0)
- Videos (1)
- Photos
- Used (1)
Ultra-Fab Products RV Skid Wheels - UF48-979020
- Hitch Mount
- Bolt-On
- Ultra-Fab Products
Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately.
Features:
- Unique roller mounts under your RV's rear hitch receiver opening to help prevent damage to your hitch that can occur from tail dragging and digging in while backing up
- Attaches with pin and clip or hitch lock (sold separately)
- Can be used at the same time as ball mount or other hitch-mounted accessories
- Heavy-duty steel construction is extra durable
Specs:
- Application: 2" x 2" trailer hitch receivers
- Pin hole diameter: 5/8"
- 1-Year warranty
Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.
48-979020 UltraFab Solid Steel Roller Hitch Protector
Video of Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ultra-Fab Products Skid Wheels - Hitch Mount - UF48-979020 Review
Today, we're going to review part number UF48-979020. This is the ultra fab steel roller for RVs with two-inch trailer hitches. This roller will attach beneath your hitch receiver opening on your motor home travel trailer or fifth wheel and will help prevent damage to your trailer hitch. The pinning clip that goes in here unto your hitch is sold separately. This unique roller mount will mount under the rear hitch receiver opening. It will help prevent damage to your hitch that can occur from tail-dragging and digging in while back up.
This attaches with a pin and a clip or a hitch lock which we sell separately. This can also be used at the same time as using a ball mount or other hitch-mounted accessories in your hitch.It is made of a heavy duty steal construction and is extra durable. Again, this fits a two-inch trailer hitch receiver. The hitch pin and clipI have an example herethat is sold separately is a 5/8-inch diameter pin that is used with this. It does come with a one-year warranty.
Basically, this would just be screwed on and you have your roller right here. Actually, on one end, right here, there is a an actual zerk fitting that you can actually grease. Put your grease gun, too, and fill this with grease to help the roller out by lubricating it in the inside. Basically, I just want to show you how it installs on the hitch receiver. I got an example here of what your two-inch hitch receiver end would look like.
Basically, you would just place it underneath, line the holes up. Just take the pin and grip the part. Just put it underneath to your hitch receiver, line the holes up, run the pin or the hitch lock, whichever you prefer to use, through there. Put the clip in. As you can see, that would hold it into place and that actually rotates.
When your hitch receiver gets so low to the ground, it will actually roll with the vehicle so that it doesn't dig in or drag. That should do it for our review on part number UF48-9798020.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches - UF48-979020
Average Customer Rating: 4.7 out of 5 stars (112 Customer Reviews)
Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately.by: Mike 04/04/2024
This is just what I need so that my bike rack doesn't drag on my driveway.
Etrailer had great service and quick shipping.
by: Jerelyn01/17/2024
I welded them to the rear of my toyhauler that came with metal V bars welded to the frame and one had actually broken. Having the wheels has helped the trailer glide over low spots as opposed to the LOUD screeching we got before when it was dragged over them.
by: Ronald 12/05/2023
I added this steel roller to the end of a hitch extension for extra protection against scrapping on the ground. This is in addition to the hitch mounted skid wheels.
by: Robert03/06/2023
In my application utilizing the roller on a 2016 Mercedes Sprinter van took a bit of time with a grinder to make it fit a
Standard Torklift hitch
I needed the roller to prevent bottoming out on a one vehicle ferry with an aluminum deck.
by: Billy04/30/2018
Had purchased the larger urethane skid wheels which broke the first time they hit the ground. Really wasn't expecting them to last on a 38' Class A, my driveway transition is steep and irregular surface at street.
These steel rollers have held up great, even when I forget and hit the transition too fast. I added a third steel roller to the bottom of the receiver hitch also.
All three have held up great.
by: Herbert 12/11/2023
working great
Thganks
by: Stuart 03/15/2023
Etrailer is the only place to go for all of your RV needs! Excellent customer service!
by: John S09/10/2015
I ordered this skid roller to help from dragging my tow bar. I have not used it as of yet, but if I remember right, it was about 1/4 the price of Blue Ox's version and appears to be built strong. Make sure you have a long enough hitch pin/lock.
by: Lincoln 10/19/2023
It saved the bottom of the hitch
by: JAMES R.05/03/2016
This is a great product ! I have a 23 foot, 2004 Gulf Stream B-Touring Cruiser. It is a Class C motor home with LT 225/75R16 tires. The trailer hitch is very close to the ground and often scrapes the ground in low spots, even when it does not have the tow dolly attached. Now, when a low spot is encountered, the steel roller contacts the ground, rolls forward, so the bottom of the actual hitch does not come in contact with the ground. No more gouges in my drive way ! I recommend this product to all owners of "low" ground scraping trailer hitches.
by: Tony07/02/2015
I installed the Ultra Fab Steel Roller for RV's on my motorhome hitch.
This product works exactly as advertised. The grease fitting is a great asset.
Tony
7/1/2016
Its been a year and this product is still as good as new
by: KT06/01/2015
I have a 2009 Winnebago Journey and have an issue with the tow hitch bending and breaking the mud flap support bar everytime I leave my driveway or the back end scraps. I bought the pair of hitch mounted skid rollers but after getting them out of the box and installing one, I found that they interfered with the mud flap. After some discussion with Nicole and Carrie Ann at ETrailer, I returned the roller a and bought the hitch mounted single roller. It installs very easily and so far has performed as expected. The customer service reps at E-Trailer were very professional and helpful during this process.
by: Mike K.05/09/2019
After researching many alternatives to protect from minor scraping on the hitch extender I installed on my Jayco Greyhawk Class C motorhome, The wheel protects the safety cables from scraping while I’m four-wheels-down towing my Lincoln MkT. I selected this Ultra-Fab Skid Wheel, and so far I’m very satisfied. It’s doing what I need. Of course, the more useful rating would come after about five years in service. Etrailer has been fair and reliable to me.
by: Frank H.09/28/2016
The wheel works perfect on my 40' 5th wheel camper. It fits perfect on the 2in. Hitch receiver on the camper bumper and prevents it from scrubbing on my driveway and doing damage. The hitch can still be utilized to mount a bike rack.
by: K A Baker - Arizona01/27/2015
Bought this for the low riding and extra long hitch of my 2015 Tiffin Allegro Diesel Pusher Motorhome with air leveling. This motorhome rides approximately 5 1/2 inches off the ground when in travel mode. Of course, you can "Raise" the coach up with the HWH air system, but in steep incline situations, even that is not enough.
First, this roller unit will come shipped to you "dry", meaning you need to fill the zerk on the bolt that extends through the wheel with some good quality grease to assist this roller turning smoothly. Be careful not to over-grease as the grease will extrude out of the roller assembly itself - it is only blocked by the nylon/plastic washer assemblies between the roller and the U-shaped mount assembly.
Second, you need to make sure you have an extended length hitch pin (at least 3 1/2 inches) as this roller assembly mounts/fastens on the outside of the hitch assembly and the "ears" of the assembly are slightly flared out even more than the width of the hitch itself. The extended length hitch pins are readily available as they are now used in most newer Toyota and Ford pickups (among other models) that have a wider hitch assembly.
The metal of this roller surface is pretty soft, so any type of rolling on concrete will put some dimples or marks in the wheel surface; the few times it has made contact with the concrete aggregate surface of my sloped driveway since install show that to be the case.
It appears to work as advertised and only time will tell how it holds up. You hope you don't need to have this rolling on a surface but it sure beats dragging your hitch on the surface.
Took off one star as the metal of the roller seems softer than it should be for this application especially when you consider there is a 26,000 pound RV riding on top of the roller,
by: Peter w 18ft boat07/18/2015
Prompt shipping, and product very good quality and was exactly as it was described and pictured. FYI, I had to fabricate mount because of my application. Be sure to check if your safety chain hooks are not in the way of mounting. My safety chain hooks on the bottom side of the reciever channel, which prevents mounting in that location. A trip to hardware store and under $10 sheet metal took care of this. Works great. Took a picture to give you a peek but having trouble downloading.
by: Branson03/01/2018
I have a 43 foot Jayco dual axle fifth wheel with a facory installed trailer hitch on the rear. Rear end drags on my driveway and most moderate slopes. This roller has prevented the hitch from ruining my driveway and damaging the trailer. Recommend this roller.
by: Snowbird06/27/2016
Very strong roller wheel that I attached to the back hitch receiver of my motorhome.
In the past I had experienced the back end of a travel trailer I owned that scraped
on the road when I went over some railroad tracks.
I am sure this product will prevent this from happening to my motorhome.
by: Carlos R.11/30/2014
This is my second Steel Roller I have purchased rom E-Trailer. The first one I installed on my Motorhome to prevent hitch dragging while towing a small pickup truck with a tow bar. It works great!
This latest one, I installed under the Mobility Scooter Carrier at my Ford Edge's Hitch connection. It also does a fine job to keep the Carrier from scraping at low drainage or uneven pavement.
I highly recommend this product. {Nov. 2014}.
by: Timothy08/12/2019
The skid roller looks like the ticket to protect the hitch on the back of my 5th wheel. I am buying a second one for the extra carry when placed in the hitch. It has not been tested yet, 4 stars may go up or down in the future.
by: Kevin01/20/2019
multi use. I built a motorcycle rack for the back of the RV that has a receiver on each frame rail to hold and support. I have added a drag wheel to each receiver as well as the back of the motorcycle rack. It holds a Honda 750 Nighthawk and has held up very well.
by: Victor06/07/2023
it rips up the concrete in my driveway,when backing up, way over priced
by: Michael05/22/2020
Excellent Service.
Very easy to install.
Product worked as expected.
Helped with tail dragging issue.
by: Craig G.06/24/2020
The skid wheel works but I guess I put too much weight on it or some dirt got inside the bearings as it stopped turning after the first few uses. It does still do what I need which is protect my trailer plug. I was surprised to get the email from etrailer a year later to see if I was happy with it. Overall the product works and the etrailer is easy to deal with.
by: Ed10/21/2019
Order this to replace the one i had that had rubber wheel. The rubber Wheel ground flat. So I got this one to replace failed rubber one. It has pertected my hitch and kept my ball nut from grinding flat. This was and is a great buy, have had no issue and would buy it again.
25
112
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV Skid Wheels
- Distance from the Pin Hole to End of Ultra-Fab Motorcycle Carrier # UF48-979033The Ultra-Fab motorcycle carrier, # UF48-979033 that you referenced measures 31-1/2 inches from the center of the hitch pin hole to the furthest point out on the rack. This carrier has been confirmed to work at the back of motorhomes. For a skid wheel for your hitch you may also be interested in the part # UF48-979020. If your hitch is dragging currently then I would expect this carrier to do so as well..
view full answer... - Highest Ground Clearance Class III Trailer Hitch Receiver for 2021 Honda OdysseyThe Class III hitch with the best ground clearance for a 5th generation Honda Odyssey like your 2021 model would be the Curt # C64NR which would provide about 12 inches of ground clearance under the receiver tube. This hitch would also be the least visible and would have the crossbar tucked up behind the bumper/fascia. This adds to the installation difficulty but really helps provide additional ground clearance (1-1/2 inches more clearance than the # e98855 that you'd looked at). In addition...
view full answer... - Is There Benefit to Using Ultra-Fab Steel Roller and Roadmaster Hitch Protector at the Same TimeI went out to our warehouse to grab a couple measurements on the Ultra-Fab Steel Roller, # UF48-979020. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to the edge of the bracket. You will need to determine if the two plates on your hitch for the chains will interfere with this. I also took a measurement from the center of the hitch pin hole to the bottom of the roller. This measurement came in at 4 inches which is actually longer than the 3-1/4 inch measurement...
view full answer...
- Highest Ground Clearance Class III Trailer Hitch Receiver for 2022 Honda OdysseyFor your 2022 Honda Odyssey, the hitch with best ground clearance will be the Draw-Tite # 76170. This will provide about 12 inches of ground clearance under the receiver tube and since the crossbar is tucked up behind the bumper/fascia it is barely visible. Take a look at the attached image. If you get into something deep enough to drag the trailer hitch, it is probably better to do that than dragging the rear facia and damaging the body panel of your new Honda. This adds to the installation...
view full answer...
- Recommended Solution for Hitch Dragging Over Speed Bumps on 2016 Toyota SiennaI have a solution for you, but the Timbren # TTORSEN04 are not going to significantly lift the rear end of your vehicle and really aren't intended for this purpose. These are designed for when you're towing a camper that has a heavier tongue weight causing sag on the rear end when it's being towed and none of the available suspension enhancements for your 2016 Toyota Sienna will provide a real significant lift you're seeking. With that said, you can use the Ultra Fab # UF48-979020 skid...
view full answer... - Skid Wheel for a Class I Trailer Hitch Receiver on a 2006 Toyota CorollaI do have an option for you but the body of the Ultra-Fab Steel Roller for RVs part # UF48-979020 is designed to surround a 2" trailer hitch receiver and since the Curt Trailer Hitch Receiver part # C11265 for your 2006 Toyota Corolla has 1-1/4" receiver which is obviously smaller, the fit will be very loose and not secure. The only option I have for you would be to weld the Ultra-Fab Steel Mini-Roller for Trailers and RVs part # UF48-979022 onto the bottom of your trailer hitch receiver...
view full answer... - Can you Weld a Wheel onto the Older Thule T2 Bike RackThe newer Thule T2 Pro, part # TH83JV, has rollers attached, but the older ones did not. It sounds like your have the older T2. While it is entirely possible to weld anything onto your older T2, I cannot say what will work or what size you need. You may be able to use something like the Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches, part # UF48-979020. You might be able to weld this on the rest area to use the roller as your wheel. Again, I cannot say for sure if this will work,...
view full answer... - Dimensions Of Ultra-Fab Steel RollerWe do not have the CAD drawings or blueprints for the Ultra-Fab Steel Roller, part # UF48-979020, but I have attached a photo of the roller with dimensions shown. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to the edge of the bracket.I also took a measurement from the center of the hitch pin hole to the bottom of the roller. The skid rollers do not have weight capacity listed because they are not designed to bear weight. They are intended to only protect...
view full answer...
- Weight Rating of Ultra-Fab Steel Roller for Trailer HitchesI checked with manufacturer on this, they do not provide a weight capacity or shear point rating for the Ultra-Fab Steel Roller, # UF48-979020. Destructive testing to determine these values is not completed. Its' purpose is to be mounted on the hitch providing a contact point prior to that of what it is protecting receiving the damage that would otherwise occur to the hitch. They did state that their products are supplied to the OEM's in bulk and they have yet to have a single warranty claim.
view full answer... - How Much Ground Clearance is Lost with the Adjustable Width Trailer Hitch Receiver 13703If you are referring to the lowest point then that would be the bottom of the frame bracket and if the horizontal section of this bracket was placed directly up against the bottom of the frame rail then it would stick down around 8" or so. However, if you are referring to the receiver tube opening then this will stick down around 5-1/2" assuming the horizontal section of the frame bracket is placed directly up against the bottom of the frame rail. I have attached a photo to help with this...
view full answer...
- How to Prevent the Trailer Hitch from Scraping the Ground on a 2015 Subaru LegacyI do have an option for you but the Curt Trailer Hitch Receiver part # 13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This measurement is taken from the ground to the top of the receiver tube opening on the hitch. Instead of replacing your trailer hitch, I recommend installing a skid wheel like the Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches part # UF48-979020. The...
view full answer... - How to Keep Extended Ball Mount from Scraping the Ground on MotorhomeUnfortunately, we don't have a skid wheel that installs on the extended ball mount. I think your best option will be a skid wheel that connects to the end of the hitch receiver like # UF48-979020 or # RM-050.
view full answer... - Skid Wheel that Can be Used with Blue Ox Lock Kit BX88177I have a solution for you, but the Blue Ox Lock Kit part # BX88177 that you referenced would not fit with the Ultra Fab Roller # UF45-979020 so your best off going with a weld on skid wheel like the part # UF48-979023 that you could attach to bottom of your high low adapter.
view full answer... - Class II or Class III for 2010 Subaru Legacy Ground ClearanceHonestly, going with a 1-1/4 inch hitch is only going to gain you 3/4 of an inch of increased ground clearance which is pretty minimal, I'd recommend going with the more versatile Class III hitch. If you're concerned about the bottom of the hitch receiver hitting the pavement, you could use a skid wheel like # UF48-979020 which mounts to a 2 inch receiver, and will work whether or not you have an accessory mounted in the hitch. I'd recommend going with the Curt Class III hitch, part #...
view full answer... - Increasing Clearance on Rear of Chrysler Town and Country with Steep DrivewayThis is a fairly common issue with the Town and Country. However our suspension kits like # TDVRRT are not designed to work as a lift kit for the rear end of your truck. They are designed to help reduce the strain on your rear axle when you are carrying heavy loads, keep your vehicle level, and create a smoother ride by adjusting to the load size. If you have a hitch on the back of your vehicle you can use # UF48-979020 to take the brunt of the impact. One solution might be to approach...
view full answer... - How To Prevent Bottoming Out With Cargo Carrier on 2020 GMC TerrainThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 76419 which is a fit for a 2020 GMC Terrain does sit pretty low to the ground therefore will reduce your ground clearance. There's not much that can be done for this but we can offer you the Ultra-Fab Steel Roller part # UF48-979020 which will help from tearing the hitch up. In regards to using a cargo carrier, you'd want one with a built-in rise like the 24x60 etrailer Cargo Carrier part # e98874 with a 2" rise shank or the Reese...
view full answer... - Is the Softride Locking Hitch Pin # SR25219 Compatible with the Ultra Fab Roller # UF48-979020I pulled both the Ultra-Fab Steel Roller # UF48-979020 and a Softride Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin # SR25219 from our warehouse to test to see if they were compatible and found that the fit is a little bit tight, but they will work with each other. Check out the video I attached that shows the two together.
view full answer... - Will Ultra-Fab Steel Roller Fit Receiver # UF48-979020 on Class A Itasca Towing 2012 Honda CR-VAs long as you are using a 2-inch trailer hitch, you should have no problem using the Ultra-Fab Steel Roller Fit Receiver # UF48-979020 while flat towing your 2012 Honda CR-V with your Class A Itasca. It can be used at the same time as other hitch-mounted accessories such as a ball mount or your Roadmaster Falcon Tow Bar # RM-525. This item attaches to your trailer hitch with a pin and clip # C21500. I have provided a video review of this product.
view full answer... - Is the Ultra-Fab Steel Roller # UF48-979020 Compatible with a Hitch Receiver for a 2011 Sienna XLEAlthough the Curt # C13105 and # C13343 as well as the Draw-Tite # 76112 are confirmed fits for your 2011 Toyota Sienna XLE, they are not compatible with the Ultra-Fab Steel Roller # UF48-979020 due to the safety chain loops. Out of the trailer hitch receivers that you referenced I recommend installing the Curt Trailer Hitch Receiver # C13343 because it installs up and under your rear trim. The only part of it that is visible is the actual hitch receiver opening and safety chain loops....
view full answer... - Is the Roadmaster Rollaway Trailer Hitch Protector Heavy Duty Enough for Use on a 37 Ft Motor HomeYes, the Rollaway Hitch Protector, # RM-050, should be plenty heavy enough to work on your 37 foot motorhome and keep the hitch from dragging when you back into your driveway, as long as the dip you have is not so deep that it is bending the hitch receiver or side plates. If your dip is so extreme that the hitch is bending, this type of item would only make the situation worse. To use the Rollaway Hitch Protector you will need to make sure that the support bar, see short video, is not...
view full answer... - Ground Clearance on a 2010 Subaru Outback Wagon with an EcoHitchI cannot verify that the ride height will be the same between a 2010 Subaru Outback Wagon and a 2018 Subaru Outback Wagon but I can tell you that the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7162 has a ground clearance measurement of 10-1/2" which is taken from the ground to the bottom of the trailer hitch receiver. The 2" trailer hitch we have that offers the most ground clearance is the Curt Trailer Hitch Receiver part # 13390 which measures around 12" from the the ground to...
view full answer... - Available RV Skid Wheels for Frame and Hitch MountingSkid wheels should not be mounted to an RV bumper, especially to one that was added as an aftermarket item. Skid wheels need to be mounted to the frame or to a hitch that is mounted to the frame. No RV bumper is rated for the kind of impact a skid wheel is intended to withstand. Your hitch mounted skid wheel like # UF48-979020 is your best bet.
view full answer... - Roller to Prevent 2 Inch Receiver From Dragging On PavementWe've got exactly what you're needing. Take a look at the Roadmaster Rollaway Trailer Hitch Protector, part # RM-050. Use the included hitch pin to install into your receiver tube and you'll be protected from eating pavement at when backing out of driveways. It can be used with a hitch accessory in place. It will work perfectly with the Curt Class III # 13105 receiver hitch. I'll link you to a product description video featuring the Roadmaster Rollaway which shows how it fits on the receiver...
view full answer... - Recommendations For Skid Rollers on 39 Foot Forest River 5th WheelI would recommend the Ultra-Fab Skid Wheels, part # UF48-979013, for your 39 foot Forest River 5th Wheel. These larger 6-inch diameter wheels will bolt onto the frame of your 5th Wheel to help prevent the tail from dragging. The longer the RV/5th Wheel, and the greater the distance between the rear of the RV/5th Wheel and the back axle, the greater the forces the skid wheels will have to deal with. This is why the larger, stronger skid wheel like those used on the Ultra-Fab # UF48-979013...
view full answer...
Do you have a question about this RV Skid Wheel?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John S.
9/9/2016
Product is working fine, Glad I have it on to preve3nt damage to toe bar.