Is the Ultra-Fab Steel Roller # UF48-979020 Compatible with a Hitch Receiver for a 2011 Sienna XLE

Question

Question:

Im looking for a hitch for my 2011 Toyota Sienna XLE. Right now, Im looking at 3 hitches. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch - C13105 Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch - C13343 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch Clearance is very important to me, as I have a steep driveway, and I would like to prevent scraping. To accomplish this, I was thinking about this product: Ultra-Fab Steel Roller for RVs with 2 inch Trailer Hitches - UF48-979020 Would any/all of the hitches above work with the roller, or would the safety loops impair the installation of the roller? Any recommendations you would have would be greatly appreciated. Thanks,

asked by: Davis L

0

Expert Reply:

Although the Curt # C13105 and # C13343 as well as the Draw-Tite # 76112 are confirmed fits for your 2011 Toyota Sienna XLE, they are not compatible with the Ultra-Fab Steel Roller # UF48-979020 due to the safety chain loops.

Out of the trailer hitch receivers that you referenced I recommend installing the Curt Trailer Hitch Receiver # C13343 because it installs up and under your rear trim. The only part of it that is visible is the actual hitch receiver opening and safety chain loops. This will give you the best ground clearance for your Sienna.

If you try to start your driveway at a little bit of an angle then that will help you to prevent from scraping the hitch receiver on the ground.

expert reply by: Jon G

0

Answer 1

The Curt hitch #C13343 that you referenced weighs a total of 39 lbs. With this and a standard ball mount you'd probably be adding about 45 lbs to the rear of the vehicle. If you were concerned about suspension sag we have the Timbren kit part…

view full answer...

Answer 2

This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch #C13343 for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Absolutely our Tongue Weight Scale #e99044 will work perfectly with your travel trailer! Our scale has a 2,000 lb capacity which you may think that a 5,000 lb trailer would be too much for our scale, but it's actually an ideal size trailer. What…

view full answer...

Answer 6

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

view full answer...

Answer 7

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 8

Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part #BW88FR. An underslung coupler is basically one that…

view full answer...

Answer 9

Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item #BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control…

view full answer...

Answer 10

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 11

You're welcome Chris! Sounds like you've more then got the hitch covered. I can not think of a better option then the TorkLift SuperHitch Magnum Trailer Hitch item #TL74FR. You will be able to pull anything and everything with this hitch and…

view full answer...

Answer 12

This is a really good question. I sent it to our engineer and he told me that the gauge has a 3%,2%,3% margin of error. This means that in the first third of its range, it is +/- 3% of the actual tongue weight, the middle of its range it is +/- 2%,…

view full answer...

Is the Ultra-Fab Steel Roller # UF48-979020 Compatible with a Hitch Receiver for a 2011 Sienna XLE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching