Timbren Rear Suspension Enhancement System
(5978 reviews)
Price: $269.36
Timbren Rear Suspension Enhancement System
Item # TFR250SDE
Retail:$316.90
Our Price: $269.36
You Save: $47.54
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (5978)
- Q & A (0)
- Photos
Timbren Vehicle Suspension - TFR250SDE
- Jounce-Style Springs
- Rear Axle Suspension Enhancement
- Extra Heavy Duty
- Timbren
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
- Improves suspension, handling and safety
- Provides additional support as needed so you always have a smooth, comfortable ride
- Allows the leaf spring ample movement while cushioning light loads
- Becomes more rigid as more weight is added
- Increases stability - providing great performance while hauling heavy loads
- Reduces vehicle sag
- Works independently - side-to-side
- Helps compensate for off-center loads
- Reduces body roll when swerving and turning corners
- Acts as shock absorbers, taking the brunt of bumps and rough roads
- Extends the life of your vehicle's suspension
Specs:
- Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
- Replaces axle bump stops on frame
- No drilling required
- Capacity: 6,000 lbs
- Do not exceed the vehicle's weight-carrying capacity
- Designed to work with a suspension system that is in good working order
- Limited lifetime warranty - satisfaction guarantee
Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.
Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren Suspension Enhancement Compared to the Competition
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.
FR250SDE - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren
Installation Details
This Product Fits The Following Vehicles
- 1970 - 1974 Ford F-100, F-150, F-250, F-350 F-100
- 1975 - 1983 Ford F-100, F-150, F-250, F-350 F-100 and F-150
- 1970 - 1983 Ford F-100, F-150, F-250, F-350 F-250
- 1992 - 1996 Ford F-150
- 1984 - 1991 Ford F-150, F-250, F-350 F-150
- 1984 - 1991 Ford F-150, F-250, F-350 F-250
- 1992 - 1996 Ford F-250 and F-350 F-250
- 1997 - 1997 Ford F-250 and F-350 Heavy Duty F-250
- 1999 - 2004 Ford F-250 Super Duty
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Timbren Rear Suspension Enhancement System - TFR250SDE
Average Customer Rating: 4.7 out of 5 stars (5978 Customer Reviews)
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.by: Michael02/02/2023
I was back and forth between Timbren SES and airbags. Everyone in forums were very biased toward air bags and very opinionated on the Timbren SES. Yet I could find one instance in which someone tried the Timbrens, were dissatisfied and then switched to air bags. I called etrailer, Jamie recommended this product to me for my application. Installation on a 20-year-old truck had me nervous, I live in the Midwest and have a lot of salt. Installation was a breeze, and I have a B&W 5th Wheel Hitch (turnover gooseneck ball). This made the install a bit more challenging simply because I had a large bolt through the frame directly above my bump stop nut. If you do this install with the B&W Hitch, get a set of gear wrenches, or borrow a buddies 15mm and 9/16 wrenches. You need the 15mm to remove the factory nut and the 9/16 to install the Timbrens. I sprayed wd40 two nights in a row prior to installation to make sure I had good penetration of oil - I didn't break a bolt or a knuckle. I recommend installing the Timbren spring to the mounting plate, then install the mounting plate with Timbren to the truck. I didn’t need to remove my wheels or my spare, I jacked up the back under the hitch, used jack stands and let the weight of the axle separate the rear end from the truck giving ample room for the installation. After installation, I checked the clearance of the TImbren from the axle and had 1 inch of clearance. I installed my 1200-pound pickup camper and the springs just started touching the axle. I have a 21-foot fiberglass boat and seen about a 1/4-inch drop after I connected it to my truck. These things work and best part is – no maintenance and no danger of shifting weight if an airbag lost pressure or was punctured/damaged. I hunt with this vehicle and drive through thick brush and timber, I feel airbags wouldn’t hold up with the abuse I put my truck through. The Timbren SES system took the squat out of my truck and made the drop from the connection of my heavy boat hardly noticeable. Thank you etrailer, great experience as usual!
by: Joshua P.05/24/2017
Chevrolet Colorado
I put between 50 and 70 thousand miles on my truck every year hauling trailers. After hauling a 32ft trailer from Colorado across Wyoming (with the everpresent cross winds) to Northern California - I saw considerable wear on my new tires. I purchased and installed the Timbren suspension system and made the same trip a week later with another (heavier) trailer. My tires looked like they hadn't worn at all! and the handling was greatly improved - no more sag or sway. Timbren makes a great product that installs easily and performs just like they promise.
by: Ed05/11/2024
1999 Ford F-250 Super Duty
Outstanding accessory,I’ve had them put on every truck I’ve owned.
Currently installed on my 1999 f250 super duty..love them.they do everything they say they will do..
by: Nick p.05/30/2019
Ford F-250 Super Duty
Excellent product. I run a farm and after installing them in my F250 I now have them on every truck in the fleet. I would not pull with my F250 before I installed the Timbren suspension system, now I tow 14000 pounds with confidence.
Nick P.
5/31/2020
Still thrilled with my purchase. Cant say enough good things about them.
by: Jeremy 06/21/2023
2000 Ford F-250 Super Duty
This was a great addition to our 2000 f250 super duty pickup. I had looked at airbag systems also. The timbres system looked like it would better suit our needs on this truck. Easy and quick install. Takes the toll out of the truck when pulling the gooseneck horse trailer or the livestock trailer. No air lines or mount issues to deal with during installation ( i.e. gooseneck hitch can be issues with air bag mounts). My wife uses this truck and I did not want her to be a long way from home and have to find parts and r shop to work on an airbag system, Timbren solved that. I would positively recommend them depending on the situation
by: Tommy R.07/02/2016
2012 Ford F-250 Super Duty
I have a 2002 F250 with a 4in. lift. Added this based on another friend of mines experience with them. He has a 2012 3/4 ton dodge and with these it doesn't squat his 5th wheel hardly at all. I'm actually picking up my 5th wheel today. So we'll see how they do. As far as install, it was a breeze. From start to finish, including clean up, right at an hour!!! With the 4in lift I had to use the spacer, which put the springs right where they needed to be. I will update in the next couple day once I see how the do with a load. But shipping was excellent. Had em overnighted and that's exactly what I got. Would definitely recommend yall to all my buddies.
by: Paul08/01/2023
This product does well with a load on the truck. Without a load the ride is more like a chuck wagon. Terribly Rough. Would not purchase this item again.
by: William 01/24/2024
1986 Ford F-150, F-250, F-350
Big improvment when hauling 1/2 yard of driveway gravel and pond rock
by: Ed04/21/2023
Just installed the timbrens. Installation went pretty well but haven’t had a chance to put them to a load test. Dealing with etrailer was great as always. All the items show up as promised and I really like the installation videos.
4 stars because I haven’t tried them yet.
by: Joseph02/09/2024
2001 Ford F-250 Super Duty
Box was open. Luckily, all parts were still there.
by: David 10/17/2023
Odelia knows what she is talkin about. Give that girl all your money
by: George 09/09/2023
2002 Ford F-250 Super Duty
I just put them on and it's great when all the parts fit like they are supposed too.
Very basic and simple.
Can't wait to haul my 1st heavy load.
by: Dana C.06/26/2016
1996 Ford F-150
Took the rear end sag out of a ½ ton pickup with a popup camper in the back. The ride was tight but not harsh. It also took most of the sway out of cornering.
I suggest installing the rubber spring on the mounting plate first before attaching the mounting plate to the vehicle frame. There is precious little room to tighten the mounting nut if you attempt to install the spring after the mounting plate is bolted on.
Dana C.
6/26/2017
It makes all the difference. Still happy!
by: Chris11/09/2018
1988 Ford F-250 Super Duty
These are fantastic if you're only occasionally hauling heavier loads. The difference towing or hauling a truck full of firewood is amazing. My rear springs are pretty beat up (88 F250) and these really help with that lean that would be inevitable when loading up with anything more than a bag of cement.
That being said because my rear springs are pretty shot, so I don't have the recommended space between these and my axle. Instead of feeling every bump in the road, now I feel it 2 or 3 times each. Even with new shocks, you feel the hard hit when the axle hits them, then when the body rebounds and lands on them again. Just something to consider, these aren't a cheap fix for bad springs.
Mike L.
11/12/2018
Your last sentence says it all. this product is meant to be used on vehicles with suspensions that are in good repair.
by: Buster M.09/03/2017
Ford F-250 Super Duty
The "Timbren's" was one of the best things I did to the F-350 SWR to improve the ride and handling while pulling a 3 horse goose-neck horse trailer with living quarters. Follow the instruction and they are easy to install in a short time. I liked them so much that I put them on my F-250 also.
Buster M.
9/8/2018
After a year it was still the best improvement I have made to the trucks. The Timbren Vehicle Suspension is something I should have installed long from the beginning. The ride is a little more stiff when empty, but thats not why the system was purchased for. Saved me from buying a $500 air bag system. I would recommend this product to anyone who hauls heavy loads.
by: MIKE R04/03/2015
2003 Ford F-250
Product was a Timbren suspension enhancement set. The product installed easily and raised the flatbed of my F 250 about two inches.
The truck is a service truck with way too much weight on it. While installing the kit, I discovered that the truck appears to have a sprung frame. I may have to repurpose the vehicle, but will leave this kit on the truck. On a test drive, the truck handles better and is more stable than it was previously. The product is a good addition to my truck. From order to receipt of product was only about 5 days. That was quick enough for me. Thank you for the service.
by: James 10/01/2021
2001 Ford F-250 Super Duty
Watch the YouTube video for your truck first. Super easy to install! My gooseneck trailer hooked up doesn't even touch my 2001 Ford F250 factory auxiliary springs with the Timbren installed. I have not gone on an extended road trip yet with these springs
by: Ross05/12/2021
2003 Ford F-250 Super Duty
Product arrived faster than expected. I didn’t need the spacer with 2” bolts on my 2003 f250 so I set them to the side to deal with the parts actually needed. Directions were fine although I would prefer the installation picture and fastener specifics on the same page to avoid always flipping page over. Drivers side was a breeze but passenger side had to be cut with a grinder before timbren install. I’m guessing 30-45 minutes for total job. They really take out the rear sag while loaded. Coupled with Bilstein 5100’s, the ride unloaded is fine with me as the shocks are pretty firm in their own right. Seems to be a great product so far and you can’t beat the price. Really enjoy doing business with etrailer!
by: Tim Z.06/10/2017
2010 Ford F-250 Super Duty
I bought this product as recommended by etrailer and I am very satisfied with it. The product arrived as scheduled and it was fairly easy to install. The hardest part was removing the stock stop blocks. It is well designed and the fit was perfect. I pull a 10,000lb 5th wheel with an F250 and it gives me peace of mind knowing that these will provide the support I need as the load increases. Great product!
by: Richard 08/06/2020
Shipping was quick, Instructions were good and installation was easy. It's going to be another month before the Timbrens get tested but if they work as well as most reviews say I'll add another star. I hope so because etrailer had the lowest price I could find but they were still expensive
by: David 09/03/2022
This product exceeded all my expectations, was not to happy with the explanation of the question I had on the product it seemed like it was being read from the product guide meaning that I could not get a straight answer to my question so I took a risk and bought it and luckily it worked out.
by: Terrence06/10/2022
etrailer was easy to order from, and provided excellent tech support on finding the right parts to fit my truck. They provide installation videos right on there product page, no hunting thru 20 different pages or websites. They shipped promptly and I got exactly what I ordered. I will use etrailer again!
by: Steve 05/12/2020
2002 Ford F-250 and F-350 Super Duty
Simple design; work great. Just as effective as extra overload springs at a fraction of the cost. This is my second 3/4 ton I have put these on. The first was 14 yrs ago; with nary a problem.
by: Chris07/12/2017
1985 Ford F-150, F-250, F-350
I received my timbrehn rear suspension enhancement kit fast. They were super easy to put on just like the instructions said. I have not hauled a load yet but I am sure they will do the job
by: Gary H.07/20/2012
The instructions that are included are very vague, the web site video is alot clearer on the instalation. The SES was however easy to assemble and install and only took about an hour from start to finish. After completing the install I hooked back to my camper and went from a 3-4 inch drop to .75 inch drop. This product works exactly as it is advertised to do. I can wait to get it on the raod now.
25
3547
Show More Reviews
See what our Experts say about this Timbren Vehicle Suspension
- Suspension Enhancement Recommendation for a 2001 Ford F-250 Super Duty Diesel and 5th Wheel TrailerThe Timbren Suspension Enhancement, # TFR250SDE, that you have referenced will work well to stabilize and keep the truck level while preventing sag. Adding air springs is a good idea if you frequently carry different load weights and need to level the truck accordingly. But for towing the 5th wheel trailer, the Timbren springs will work well. I have included a link to the installation details and a video showing a typical installation.
view full answer... - Will a Timbren Rear Suspension System Work on a 2004 Ford F-250 with a Custom 5th Wheel Install KitThe instruction manuals you will need for the Reese 5th Wheel Trailer Hitch with Square Tube Slider, # RP30051, are available online for part # RP30047 and part # RP30048, see links. These two parts make up the # RP30051 fifth wheel hitch. The Custom Fifth Wheel Trailer Hitch Installation Kit, # 50043-6008, is a good choice for your truck and will work great with the Timbren Rear Suspension Enhancement System, # TFR250SDE. The Timbren system will install in the factory bump stop location...
view full answer...
- Suspension Enhancement Recommendation for 1997 Ford F-250 with Gooseneck HitchFor a truck your age they didn't make the air bag kits to be compatible with gooseneck hitch rail kits. The rail kits will interfere with the brackets of the air bag kits. That's why you would need the Timbren kit part # TFR250SDE which will fit with a rail kit like what you have. Plus you never have to deal with maintaining air pressure in the bags.
view full answer... - Suspension Enhancement Recommendation for a 2001 Ford F-250 with 5th Wheel Trailer HitchBoth the # RP50043 brackets and the Firestone brackets # F2550 for your 2001 Ford F-250 install on the inboard side of the vehicle frame rails so they cannot be installed at the same time. What I recommend is a Timbren system, # TFR250SDE, that installs on the bottom of the frame rail and will not interfere. I have included some instructional links for you to view. This system will work well for towing a 5th wheel trailer and they will not affect the non-loaded ride of the vehicle. I...
view full answer... - Suspension Upgrade for a 2004 Ford F-250 4x4 Short Bed with Curt Custom 5th Wheel Installation KitSince the Curt custom installation kit for your d2004 Ford F-250 install on the outboard sides of the frame, I recommend a suspension enhancement kit that installs only on the bottoms of the frame. You can use Timbren springs, # TFR250SDE. These springs are not air bags but they do work independently from each other and are ideal for carrying the same or similar loads in the truck like when towing a 5th wheel or gooseneck trailer. I have linked a video showing an installation, the instructions,...
view full answer... - Which Timbren Kit Fits 2004 Ford F-250 2WD with Stock SuspensionYes, the Timbren kit part # TFR250SDE that you referenced is a confirmed fit for your 2004 Ford F-250 2wd with stock height suspension. I attached an install video we made that shows this kit installed on a 2004 F-250 just like yours for you to check out as well.
view full answer... - Timbren Suspension Enhancement Versus Firestone Ride-Rite for 2004 Ford F250 Towing Fifth WheelOne of my co-workers did a comparison test on similar Timbren and Firestone Ride-Rite springs on his Dodge Ram. He found that all-around, the Timbren performed better but that when the truck was not heavily loaded, the Firestone system provided a better ride. So, if you only pull your fifth wheel occasionally, the Firestone # F2550 would probably be a better choice for you. If you will be towing frequently, or will have the bed of the truck heavily loaded on a frequent basis the Timbren...
view full answer... - Will the SumoSprings Solo Custom Helper Spring Fit a Lifted 1995 Ford F-150The SumoSprings Solo Custom Helper Springs part # SSR-117-47 will fit a 1995 Ford F-150 with lift but they would be ineffective. Instead, I recommend the Timbren Rear Suspension Enhancement System part # TFR250SDE which because of the lift would require spacers, part # A25723-90AH00. Please note, you won't match the spacers to the advertised lift but rather the actual rear lift which is usually much less. For example, many 6" lifts raise the front 6" and the rear 4".
view full answer... - Suspension Enhancement Recommendation for a 1997 Ford F-250 Towing Fifth Wheel TrailerI have great suspension enhancement solution that we can recommend, but the air spring kits for your truck would interfere with the install brackets of the Turnover hitch you have installed so a better solution would a Timbren like part # TFR250SDE. This will provide you with the suspension support you are looking for and would not interfere with the frame brackets of your fifth wheel hitch. I attached an install video for this for you to check out as well. You'll notice there is no drilling...
view full answer... - Install Instructions/Video for Timbren Kit on a 2001 Ford F-250 4WDThe Timbren kit you need for your 2001 Ford F-250 4x4 is the part # TFR250SDE which I attached a link to the install instructions plus a link to a video that shows our installers installing the kit on a 2002 Ford F-250 just like yours.
view full answer... - Timbren Rear Suspension Enhancement for a 1989 Ford F-250 GVW of 6600 lbsYou can install either the 6,000 lb system, # TFR250SDE, or the 8,600 lb system, # TFR350SDE, on your truck, but they will not increase the weight carrying capacity of your truck. You will still be limited to the weight capacity that Ford has set for your truck. These springs were designed to work with your factory suspension to help reduce sag and improve safety and handling when hauling heavy loads. I would recommend installing the 6,000 lb springs because you are not gaining an advantage...
view full answer... - Best Timbren Suspension Enhancement For 2003 Ford F-250There is a big difference between the two Timbren kits that fit your 2003 Ford F-250, as the # TFR250SDE is for applications like towing a 5th wheel trailer or travel trailer, and the # TFRTT350E is for service trucks or work trucks. They are not the same with stiffer rubber, the difference is the # TFRTT350E is single-convoluted so it does not have almost any "give" to it. So the correct kit for your '03 F-250 is the following: - Timbren Rear Suspension Enhancement System # TFR250SDE This...
view full answer... - Total Height of Spring, Bracket and Spacer on Timbren Rear Axle Spring Kit # TFR250SDEThe Timbren rear axle jounce spring kit for Ford trucks that you referenced, part # TFR250SDE, is a correct fit for the 2002 F-250 Super Duty. This kit will fit both 2-wheel-drive and 4-wheel-drive versions and installs without drilling. The attach photo shows the dimensions of each of the main components in this kit. The springs are 5-1/16-inch tall, the spacer is 1/2-inch thick x 3-7/8-inch diameter, and the overall height of the bracket is 2-inches. I have linked both the written installation...
view full answer...
- Suspension Enhancement Options For 2001 Ford F-250 4x4 With 4 Inch Lift KitYou have many options for a 4 inch lift on your 2001 Ford F-250 4x4 regarding suspension enhancement to reduce sag. For an air spring option, I recommend the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57390 along with the Air Lift Lock-N-Lift Spacers for Lifted Vehicles - 4" Lift # AL52440. Another great option is the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2550 along with the Lift Spacers for Firestone Ride-Rite Air Helper Springs...
view full answer... - Recommended Rear Suspension Enhancement Springs for 1997 Ford F-250 Heavy DutyFor your 1997 Ford F-250 HD, I recommend installing the Timbren Rear Suspension Enhancement Springs, # TFR150SDE, for a 2 wheel drive, and # TFR250SDE, for a 4 wheel drive. These springs will fit models with or without factory top overload springs and there is no drilling required to install. I have attached links to the installation instructions as well as links to installation videos. You will notice that the trucks in the videos are different model years than your F-250, but the installation...
view full answer... - Suspension Enhancement and 5th Wheel Trailer Hitch Install Kit for a 1994 Ford F-150 4x4 Short BedConsidering that you will be moving around different 5th wheel trailers but just from lot to lot I would go with Timbren springs, # TFR250SDE. These springs mount to the bottoms of the truck frame rails. This is important because this type of design means that it will not interfere with a 5th wheel installation kit. I do not know what brand or style of rails that you already have but they may not be compatible with the universal installation brackets, # RP30439. These brackets are designed...
view full answer... - Are Spacers Needed to Install Timbrens on Vehicle with Leveling KitIf the leveling kit you installed raised the suspension (moved the axle further from the frame) then you will need to use a spacer with the Timbren part # TFR250SDE. For that we have the part # A25723-90AH00 which is a 1 inch spacer. The longer bolts needed would need to be provided by you though as the hardware included is not long enough. If the suspension lift you have is just a body lift then the spacer wouldn't be needed.
view full answer... - Will Air Lift Air Bags Fit on a 1994 Ford F-250/F-350 with a 5th Wheel Trailer Hitch InstalledIf the 5th wheel hitch install kit brackets that attach to the frame are the universal L-brackets (two per side) then it is possible to use Air Lift air bags # AL88215 on a 1994 Ford F-250/F-350. But it is still possible for there to be interference which is why it is listed in our fit guide as NOT being compatible. What will work for sure is a set of Timbren springs because the mount to the bottoms of the frame rails and will not interfere with any 5th wheel brackets. If you have an...
view full answer... - Can Air Lift and Timbrens be Installed on a 2004 Ford F-250From what I can see it looks like the Timbren Rear Suspension # TFR250SDE will fit with the Air Lift LoadLifter 5000 # AL88298 on your 2004 Ford F-250. The Air Lift brackets have an opening that will fit around the mounting hardware for the Timbrens. Depending on the lift of your vehicle you may need a spacer kit like the 2" Spacer # AL52420 or 4" Spacer # AL52440. To determine which spacer kit you need (if any), you need to park your truck on a level surface and measure the distance between...
view full answer...
- Suspension Enhancement and Fifth Wheel Rail Kit Recommendation for a 2002 Ford F-250I did some checking and the Air Lift kit you have installed on your 2002 Ford F-250 was not designed specifically to allow the install of fifth wheel rails. You would have to remove them and go with a Timbren part # TFR250SDE if you wanted to install fifth wheel rails and still have suspension support. The Timbrens work great at providing additional support and don't require maintaining air pressure. Then the Reese Elite Underbed Kit part # RP30073 would fit your truck and you could install...
view full answer... - Timbren Suspension Enhancement Fit For 1997 Ford F-250HD 4WDThe difference is fit, as three of the parts you mentioned are for F-350 cab & chassis and not a fit for the 1997 Ford F-250HD 4WD. The parts that fit that truck are the following: - Front: Timbren Front Suspension Enhancement System # TFF2504A - Rear: Timbren Rear Suspension Enhancement System # TFR250SDE OR - Rear: Timbren Suspension Enhancement System - Severe Service - Rear Axle # TFRTT350E The difference between the two rear kits is their application; the # TFR250SDE is for occasional...
view full answer... - Timbren Rear Suspension Needed To Tow a 12K 5th Wheel with a 2004 Ford F-250The Timbren Rear Suspension Enhancement System that is compatible with your 2004 Ford F-250 is the part # TFR250SDE. These are rated for 6,000 lbs and will do a great job at helping to support the pin weight of your 5th wheel trailer. Please note that suspension enhancement systems do not increase the weight capacity of the vehicle they are installed on. They only help support a suspension that is in good working order. Attached is an installation video as well as the written instructions...
view full answer...
- Recommended 5th Wheel Hitch Setup for a 1993 Ford F-250 with Factory Overload SpringsIt sounds to me like you are looking for a 5th wheel hitch installation kit that is compatible with the factory overload leaf springs on your 4x4 1993 Ford F-250 with 8' bed. In order to mount a 5th wheel hitch in the bed of your truck, I recommend using the Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches part # RP30035. The installation brackets will not interfere with your factory overload springs. As long as the 5th wheel hitch uses industry standard above...
view full answer...
- Better Ride on Rough Roads for a 1997 Ford F-250HDI am sure there are some tires that you could use but the tires that we carry would not work since they are designed for trailer use only. Another possible solution is to change the suspension or add suspension enhancement. Using Timbren springs, # TFR150SDE for 2-wheel drive or # TFR250SDE for 4-wheel drive, will lessen the travel in the stock suspension and take the bite out of bumps and pot holes. I have linked videos showing installations of each.
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Robert C
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Carrie F
Updated by:
Bethann B
Video by:
Jonathan Y
Video by:
Schuyler H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joshua P.
5/24/2018
Im still driving my slightly modified Ford F250 HD Powerstroke - your Timbren suspension anti-sway bags have been a life saver on my tires! The truck rides level and smooth without sway, even in high winds with my cargo trailers. Handling under heavy loads is also vastly improved. Now if I could only swap the front suspension stops with more Timbren bags the damned factory bumpers are riveted in place!