3-Piece Electrician Tool Set
(9 reviews)
Price: $28.25
In Stock
3-Piece Electrician Tool Set
Item # PTW1714
Retail:$55.70
Our Price: $28.25
You Save: 49%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (9)
- Q & A (0)
- Videos (2)
- Photos
Performance Tool Electrical Tools - PTW1714
- Testers
- Multimeter
- Performance Tool
- Red
Features:
- Great assortment for the garage, home, workshop or jobsite
- Digital multimeter measures AC and DC voltage, tests DC current and resistance, diode test and features a digital display and data storage
- 7" diagonal wire cutting pliers feature short jaws for easy cutting in tight areas, drop-forged and induction-hardened for durability
- 7" wire stripper for 10-20 AWG wire, cuts and threads popular bolt sizes, wire looping/bending holes, and serrated nose
- Includes test leads, 9-volt battery and user manual
W1714 3-Piece Electrician Tool Set
Installation Details
California residents: click here
Video of 3-Piece Electrician Tool Set
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Performance Tool Wiring - Tools for Wiring - PTW1714 Review
Today we're going to be taking a look at the performance tool 3 piece electrician tool set. This is going to offer a great assortment for the garage, home, workshop use or on the job site. It's going to come with a digital multi meter that's going to measure AC and DC voltage. It's going to test DC current, as well as resistance. Features a diode test and it's going to feature a digital display, as well as data storage. This unit is going to feature a nice strong a durable casing to keep it protected. It's also got a kickstand here on the back that props the unit up for hands-free operation or freeing up your hands to do something else. Again, we have the LCD screen.
Right here is going to be a hold button. Then, we're going to have our range switch. Nice, clicking design that firmly stops in each location. You can see that large display. It's very easy to read and it's got the off position there.
We're going to have the HFE socket. Right here we're going to have 3 connecting jacks for the test leads. The unit's going to run off of a 9 volt battery. It does come with a 9 volt battery. The battery area is directly back here. You'd remove this screw on the bottom.
Remove the protective casing and then slide that bottom portion off. Then you can change the battery as needed. It is nice that it comes with that case. That's going to do a great job of keeping the unit protected, in case you accidentally drop it or bump it up against something. It's going to come with your test leads. Test leads are included. These are going to measure around 40 inches from end to end.
Then, they're going to have the protective covers over the tips there. We're going to have a pair of 7 inch diagonal wire-cutting pliers. They got the nice short jaws on there for easy cutting in tight areas. These are drop forged and induction, hardened for durability and they got the nice easy grip design on it, as well. These right here, these are going to be the 7 inch wire strippers for 10 to 20 gauge wires. It's got the nice little locking tab on there, so when they're not being used, close them. Push in that and then it keeps the unit compressed. It's also going to cut and thread popular bolt sizes. You can use these to loop wires and bend holes. It's got the serrated nose design right there. That's going to do it for today's look at the performance tool 3 piece electrician tool set.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
3-Piece Electrician Tool Set - PTW1714
Average Customer Rating: 4.7 out of 5 stars (9 Customer Reviews)
by: Terry05/28/2022
The installation process was fast and easy. All the materials sent were spot on to get the job done.
Thank you!
by: Dennis 05/30/2021
Just the right size, and easy to use. Perfect for the Novice user. Package included cutters and strippers that were well made. Better quality then I expected for the price.
by: Kenneth02/09/2019
Packages received in great shape. As always purchases from Etrailer are
prompt and dependable.
by: Russ09/16/2022
Cheaply made.
by: Dwight04/25/2018
Great value. I use the tools all the time. Thanks
by: David10/31/2021
Very good quality. Great fit and finish. Glad I bought them.
by: Steve 12/17/2020
Excellent value!
by: Kevin07/17/2020
Every thing worked out very good
by: Richard 01/21/2022
9
9
See what our Experts say about this Performance Tool Electrical Tools
- Troubleshooting Running Lights Not Working on Trailer Towed with a 2014 Ford F-150The easiest way to check and see if something is not working on your 2014 Ford F-150 connector is to use a circuit tester like part # PTW2991 or a multimeter like part # PTW1714 and test the pin for the running lights (see attached pictures). If you are getting power then the issue is on your trailer side but if you don't get power then you either have a bad fuse/relay or the OEM wiring is damaged. When I checked the online version of the owner's manual for a 2014 F-150 the only fuses I...
view full answer...
- Will the Curt Echo Work with a 2006 Ford F-150 with the Factory Tow PackageIf the 7-Way on your 2006 Ford F-150 is from the factory then the 12V Power Pin in the 1 o'clock position should already be active. You can verify this by using a circuit tester like part # PTW2991 or a multimeter like part # PTW1714 to make sure there is constant power there. Some vehicle require that the key be in the on position for power to be sent to the 7-Way so if you initially don't have power try going that route. Let me know if you still don't have power and I can help you troubleshoot...
view full answer...
- What is Warranty Length of Thomas Payne Recliners with Heat FunctionThe warranty on all of the now discontinued Thomas Payne RV Swivel Glider RV Recliner w/ Heated Seats like the 195-000029, is 1 year from the date of purchase. If the chair is OEM in the RV then the warranty is 1 year from the date of the original purchase. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is...
view full answer... - How to Install 7-Way Plug Wiring Correctly on a 1975 Toyota Land CruiserThank you for the pictures! A common misconception is that there is a specific wire color for each specific function. Although there are "typical" wire colors, nothing is set in stone so your best bet is to test for function. Using a circuit tester like part # PTW2979 or a multimeter like part # PTW1714 test each of your wires on your 1975 Toyota Land Cruiser by running through your lighting functions. Once you know what circuit each wire is connected to, use the picture of the 7-Way...
view full answer...
- iRV63 Radio Troubleshooting LED Display That Is Not WorkingIf you've already tried everything listed in the owner's manual for your iRV RV Stereo - Double DIN - HDMI, AUX, Bluetooth, App Control # IRV64FR, I recommend trying a factory reset. To do this, you're going to press and hold the power button for 5 seconds until the unit shuts off. After the unit is shut off, press the "ON" button to re-power on the unit. Additionally I also suggest checking your connections to the radio, as well as, checking for proper voltage with a multimeter # PTW1714....
view full answer... - Wiring a Pollak 7-Way Connector on a Fleetwood RVI believe that your problem is the color of the wiring itself. Although there are standards out there, sometimes vehicle manufacturers use different color wiring for different functions which ends up throwing people off when they are trying to install a connector like what you are doing with the Pollak # PK12-707E. Try taking a circuit tester like part # PTW2993 or a multimeter like part # PTW1714 and test the functions of each wire on your Fleetwood. For example, use one of your turn...
view full answer...
- Troubleshooting Weak Braking with the Manual Override on the Reese/Tow Ready Pilot Brake ControllerWere you driving with your trailer when you applied the brakes with the Pilot 2-6 Brake Electronic Brake Controller # 80550? According to the instructions you want to warm the trailer brakes before setting the power setting as warm brakes are more responsive. You can warm the trailer brakes by driving 45 mph for a short distance and then use the manual override lever to engage the brakes at a low level. You do not want to set the power high enough to lock up the brakes as this can cause...
view full answer...
- What Faceplate And Rocker Switch Do You Recommend To Replace My Dimmer SwitchThe IP66/206 Single RV Switch Faceplate - Black, part # 37214045, will work with any IP66/206 series switches. We have a number of IP66 switches that will work with this faceplate. The switch you linked to this question, RV Switch - On/On - SPDT - Black, is not compatible with this faceplate. However, I do have some RV switches that are compatible with this faceplate, My recommendation is the Single Rocker Switch - On/Off/On - Water Resistant - SPDT - Black. part # 37213835. You will need...
view full answer...
- Troubleshooting Heater Function of Thomas Payne Power Recliner that Stopped Working on One SideWe've checked with Thomas Payne about this issue in the past and they said that either the heater is bad or the control box needs to be replaced on your Thomas Payne Momentum recliner. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is bad and you can replace it with part # 195-387596. If you don't have continuity...
view full answer... - Cant Find Cold Side of Brake Light Switch on 2007 Freightliner Century Semi for Brake ControllerI do have a possible brake controller that you can use but unfortuantely I can't really help you out with locating your stop light switch on a 2007 Freightliner Century Semi. The only advice I can really give is to use a circuit tester # PTW2992 or multimeter # PTW1714 to test which wire gets hot when you press the brake pedal. Other than that none of my resources have information on the location of the stop light wire for your 2007 Freightliner Century Semi. If you can't find the stop...
view full answer...
- Troubleshooting No Right Stop/Turn Lights on P.J. TrailerTrailer wiring can be a little frustrating to work with at times because there isn't a specific color wire that is "standard" for different circuits. Typically the right (passenger) side stop/turn will be on a green wire but that isn't always the case. To determine if the problem is on your tow vehicle or your trailer I recommend using a circuit tester # PTW2979 or a multimeter # PTW1714 to ensure that the connector on your tow vehicle is sending power to the right stop/turn circuit. If...
view full answer...
- The iRV63 RV Stereo Will Not Power-UpI suggest using a multimeter, such as the # PTW1714, to verify that a full 12V is live at the connection point for the iRV RV Stereo, # IRV64FR. If you do have proper voltage present and all connections are made per installation instructions with failure to illuminate the screen, please let us know that we may begin a returns claim.
view full answer... - How to Determine Which Wire Carries Constant Power for GPS InstallationI wish I could tell you right off-hand which wire has constant power so you can connect your GPS to it but the best way for you to determine which wire carries that function is to use a circuit tester like part # PTW2993 or a multimeter like part # PTW1714 which can show you which wire has continuous power. Even though there are standard wire colors out there sometimes those colors aren't used so it is best to test.
view full answer... - Troubleshooting Poor Braking Action on TrailerIt sounds like you have your trailer brakes adjusted properly so checking the voltage from your brake controller is definitely the correct route to go. Start at the 7-Way plug on your tow vehicle and test the pin in the 5 o'clock position with a multimeter like part # PTW1714 to see if you are getting 12V power when you use the manual override on your controller with it set at the highest power setting. If you don't get power at the 7-Way then the next step is to test the wiring from...
view full answer...
- Troubleshooting 7-Way Connector Not Working on a 2000 Chevy Silverado 1500If your trailer is working properly with other vehicles then the problem is definitely on your 2000 Chevy Silverado 1500. The fuse that you referenced I believe is for the 12V power but I could be mistaken. I tried looking up the online owner's manual but it didn't really identify the various fuses with numbers. With that being said, the best place to start is right at the 7-Way connector on your Chevy. Using a circuit tester like part # PTW2991 or a multimeter like part # PTW1714 check...
view full answer...
- How to Inspect/Test Electric Trailer Brake MagnetsFor starters, you'll want to give the magnets a good looking over. If you look at the front face of the magnet that rides against the armature surface of the brake drum, you should not see any of the copper wiring that's encased within the magnet. If you do, it's a sure sign that the magnets need replacing. Then, use a multimeter like # PTW1714 and check the wires feeding the magnet while a helper holds the manual brake lever down on your brake controller. You should be seeing at least...
view full answer... - Troubleshooting T-One Vehicle Wiring Harness 4-Way Connector on a 2018 Volkswagen TiguanHave you tried testing the 4-Way connector of the (discontinued) T-One Vehicle Wiring Harness 118765 on your 2018 Volkswagen Tiguan? If you use a circuit tester # PTW2993 or a multimeter # PTW1714 on the T-One 4-Way, you can determine if the issue is on your vehicle side or trailer side. If on the vehicle side, try testing the wiring on the vehicle side of the ModuLite. If power is getting to the ModuLite but not coming out then the ModuLite is bad, and you need to replace the entire wiring...
view full answer... - Troubleshooting a Furrion Tankless Water Heater & Wall Mounted ControllerI suggest you do a continuity check on all wires from your thermostat to the Furrion RV Tankless Water Heater, # FR93FR and ensure the ground wires are solid. Use a meter such as the # PTW1714 or something similar.
view full answer... - Troubleshooting Trailer Lights and Blower Motor for 2015 Jeep Cherokee After Launching BoatMy first thought after reading this is if you disconnected the wiring from your trailer before you backed your trailer in the water to launch your boat. If you didn't then that would explain the issue. Since water and electricity don't like each other very much what probably happened is that (if you didn't disconnect anything) you had a short somewhere and you need to inspect all of your wiring. It could be that the wiring connector itself either on your 2015 Jeep Cherokee or your boat...
view full answer...
- Is a Brake Controller Required for Towing a Camper TrailerNot necessarily. It all depends on how big of a camper you are wanting to tow and sometimes what you are towing it with. The typical rule of thumb that vehicle manufacturers go by is if you are towing it with a smaller vehicle a brake controller is required for anything over 1,000 lbs but for bigger trucks that is sometimes moved to 2,000 lbs. Local and State laws sometimes affect this as well. In any case, if your camper trailer is over that 1,000 lb threshold it is a good idea to use...
view full answer... - Heater on Thomas Payne Theater Seating Not WorkingThere could be 2 different issues here, so I'll give you a way to test out the control box which will help us figure out what the issue might be. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test using a multimeter like part # PTW1714. Using the continuity setting on the meter, check and see if there is continuity on the wires of the control box- if you have continuity then that means the control box is bad and you...
view full answer... - How to Wire Headache Rack w/ LED Lights on 2019 Ford Super DutyThe B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights # BWPUCP7500WA uses bonded 4 pole wire to make the connections, however most of the new Fords have a "smart" tow plug, which means that it is looking for voltage to see if the trailer is hooked up or not. That explains the messages on the dash. The best way to wire up the headache rack is to wire it directly to your Super Duty's electrical system, and bypass the trailer wiring. The factory harness is on the passenger side of...
view full answer... - Testing Heater for Thomas Payne Momentum SofaWhen testing the control box you will not unplug it; you will use Multimeter # PTW1714 and unplug the red and black wires from the control box to test them for continuity. If you do have continuity the control box is simply bad and you can replace it with the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596.
view full answer... - How to Test Trailer Brake Magnets for PowerSince you have had the RV dealer look at the brakes, they have likely done this already, but in order to test the trailer brake magnets for power you will need a 12 volt battery and a multimeter like # PTW1714. To test individual brake magnets for proper function, sever the magnet wires and connect the ammeter between the positive terminal of a 12-volt battery and one of the magnet wires; it does not matter which one. Then connect the other magnet wire to the negative battery terminal....
view full answer...
Do you have a question about this Electrical Tool?
Info for this part was:
Video Edited:
Jacob T
Video by:
Kathleen M
Installed by:
Cole B
Installed by:
Shane H
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Erin H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dennis
5/30/2022
Use them frequently, very compact.