Air Lift Air Hose Cutter
(87 reviews)
Price: $25.53
In Stock
Air Lift Air Hose Cutter
Item # AL10530
Retail:$34.83
Our Price: $25.53
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (87)
- Q & A (0)
- Videos (1)
- Photos
Air Lift Hand Tools - AL10530
- Tubing Cutters
- Cutting Tools
- Air Lift
Achieve perfection with the Air Lift air hose cutter. Leave behind the frustration and anxiety of hand-cutting air line tubing by using this hose cutter for exact cuts and flawless seals.
Features:
- Hand-held device cuts air line tubing for your compressor and air springs
- Accurately cuts 1/4" - 1/2" tubing
- Perfect cuts for perfect seals
- Made in USA
- 2-Year limited warranty
10530 Airlift Air Line Cutter
California residents: click here
Video of Air Lift Air Hose Cutter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Air Lift Air Hose Cutter Review
Today we're going to take a look at the Air Lift tubing cutter, part number AL10530. Our tubing cutter is designed to cut the air lines for tubing from a 1/4 inch up to 1/2 inch in size. Our tubing cutter will allow us to get a clean square cut on the line without crimping or distorting it. As you can see the razor blade portion of our cutter is about 7/8 of an inch wide, this gives us up to and just a little over 1/2 of cutting surface making it easy to cut the 1/4 inch air line making sure we get a clean square cut on the line. Unlike the previous cut, not only is it not straight or square to the line, but it also crimped it, distorting it. By using the tubing cutter it allows us to get a clean square cut on the line without distorting it.
While it's perfect for that 1/4 inch air line, it'll also work up to a 1/2 inch hose. A little more effort it'll cut right right through it. This is getting a 5 star rating from our customers who agree that it works perfectly and is simple to use. That'll do it for our review of the Air Lift tubing cutter, part number AL10530.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Air Lift Air Hose Cutter - AL10530
Average Customer Rating: 4.7 out of 5 stars (87 Customer Reviews)
Achieve perfection with the Air Lift air hose cutter. Leave behind the frustration and anxiety of hand-cutting air line tubing by using this hose cutter for exact cuts and flawless seals.by: John02/21/2024
Haven’t tried it yet because you shipped air bags for gmc 3500 instead of ford f350 even though I ordered the correct one
by: Dale11/16/2023
Works great. The air line that came with the ride rite kit had obviously been cut with something that damaged the ends as they were not round so had to trim them up also.
by: Terry12/21/2023
Perfect to cut airlines
by: David 08/28/2023
Ingenious tool for square cutting plastic tubing. I thought overpriced.
by: Ed11/09/2022
This onboRd compressor works great! I haul a variety of items and tow a camper and horse trailer. Combining this with rear axel air bags makes it easy to level and provide stability
by: Stephen05/26/2022
I first purchased the Air Lift LoadLifter in an attempt to help reduce trailer sway and handling of my truck when towing my travel trailer. The far exceeded my expectations. Having the ability to get both my truck and my trailer completely level has made an enormous difference in towing. These air bags are not designed to reduce trailer sway, but being able to tow with everything level and having anti-sway mechanism is the perfect pair. I only wished I had found them earlier and there would be been several less "white knuckle" driving experiences.
by: Grant T06/15/2021
Worked great with nice straight clean cut, more critical though no deformation of shape so you get a tight seal.
by: Stephen08/23/2019
The Firestone airbags were very easy to install. The only place that I scratched my head was for the torque values for the various hardware. I eventually located it at the end of the instructions. It is common in the better auto repair manuals to list the torque ratings in the drawings. Just an idea.
Since I'm somewhat OCD when it comes to mechanical work, I always have a torque wrench in hand for the final tightening.
Your instructional videos are a real time saver. Well Done!!!
The air tubing cutter worked as advertised. Nice, clean and even cuts every time.
by: Christopher 07/21/2022
This was my first time buying anything from etrailer.com and the experience was amazing. From easy search to many video reviews and installation videos, to the best price I could find... this is how buying online should be! Thanks!
by: Kurt03/19/2022
Perfect tool for an suspension air bag installation project. Perfect cuts for no leaks on the quick connect fittings.
by: Pat M10/24/2016
The cutter worked great with no issues. It made the installation of my air springs kit much easier and most importantly, no leaks! Would definitely recommend it to others.
by: Dustin B07/28/2019
Worked well for Air Lift air ride helper spring installation.
by: Henry G..05/10/2015
I used this cutter to get a clean straight cut for the air lines used on the air bags I installed on my 2015 Ford F250.
by: Steve06/12/2017
Ordered this kit to level my truck when pulling the boat. Easy instructions to follow and installation was simple as everything bolted right on, total time to install was under 3 hours.
by: Gregory 02/11/2023
Time saver. It performs perfectly.
by: Larry01/03/2017
I'm very satisfied with the products and services that I received from etrailer. I highly recommend etrailer.
by: Karl07/23/2021
Honestly its way overpriced, but it is perfect for cutting the air hoses without deforming the hose.
by: David 11/03/2021
It looks like it will work well for getting a square cut on the tubing, but haven't had the time to use it yet.
by: Ted09/01/2016
Worked great.
Little pricey but if your installing an air system on your vehicle it's a must have.
by: Tom 09/29/2022
worked as stated
by: Robert08/11/2022
Works great, a bit expensive for what it is.
by: Moadeeb111/30/2019
Product works as advertised. Product alleviates the need for separate lines to the back of truck. Hreatdesign and awesome product.
I wouldn't hesitate to buy this again!
by: Wes 04/15/2021
Great service , the product was delivered on time and complete , installed and functioning exactly as advertised. I expect to order more products in the future, great job!
by: Dean 11/17/2021
Dean
11/18/2022
I didnt realize the airlift kit I ordered came with stainless steel hoses, so I did not need to use the cutter.
by: Andrew 10/27/2021
Worked as expected. Produces clean and square cuts.
25
87
Show More Reviews
See what our Experts say about this Air Lift Hand Tools
- How to Find a Leak with a Firestone Air Compressor SystemThe issue with your air compressor kicking on each time you start the vehicle is an indication that you have a leak. The easiest way to find an air leak on your system would be to inflate the system to about 60 psi then take a bottle with a mixture of soap and water to spray down all the lines, fittings, and airbags. The air bubbles should expand once a leak is detected. If the air leak occurred at the top of the fitting then chances are the line is not seated properly or cut correctly....
view full answer... - Troubleshooting Air Lift Air Bag Kit that LeaksTypically this is caused by the air lines not being cut squarely which allows them to leak where they attach to the air bags. What you can do though to narrow it down quickly is fill up a water bottle with soapy water and spray the entire assembly and you'll see it bubbling where it is leaking. To make cutting the air lines easy we have the hose cutter part # AL10530.
view full answer... - Which Air Helper Springs are Compatible with a 2007 Chevrolet Express 2500The air springs for your 2007 Chevrolet Express Van 2500 are the Air Lift LoadLifter 5000, part # AL57205. They're confirmed to fit your 2500. Keep in mind adding air springs will not increase the weight capacity of the van. Many customers also find installation to be easier using a Tubing Cutter # AL10530.
view full answer... - Tips for Finding Leak in Air Lift Suspension Enhancement Air BagIf you spray the air lines with soapy water typically you can see where the air is bubbling and what is causing the leak. Most of the time leaks are at where the air line inserts into a fitting. If the air line wasn't cut perfectly square it will end up leaking. I'd check there first. For a tube cutter we have the part # AL10530.
view full answer... - Compatibility of Air Lift LoadLifter Air Spring System with 5th Wheel Hitch on 2011 Dodge Ram 2500According to my contact at Air Lift, the LoadLifter 5000 System you mentioned, part # AL57295 is indeed compatible with your 2011 Ram 2500 Big Horn with the Curt 5th wheel hitch. The system mounts to the bottom of the frame members, and therefore will not interfere with the fifth wheel install brackets. When cutting the air line tubing, it is crucial that the cuts are perfectly square to avoid air leakage. I would recommend using a tubing cutter like part # AL10530 to complete the cuts. To...
view full answer... - What Needs to be Drilled to Install Air Lift Ride Control Air Helper Springs in 2003 Chevy Astro VanThere are a couple things you'll need to drill on the frame of your 2003 Chevy Astro van to install the Air Lift Ride Control Air Helper Springs # AL59521. The first is a hole to relocate the brake-line bracket, which is just forward of the axle; you'll drill a 5/16" hole to insert a self-tapping screw to do that. Next are holes for the mounting brackets, which are three holes for the driver and passenger side - both upper mounting holes and the rear, lower mounting holes. You can also...
view full answer... - Do Air Lift Air Helper Springs Fit 2014 Dodge DurangoI can verify for you that yes, the Air Lift air helper springs you asked about are a fit for your 2014 Dodge Durango: - Air Lift 1000 Air Helper Springs for Coil Springs # AL60824 The Air Lift 1000 # AL60824 are a really nice choice to help out the suspension in your '14 Durango. They are going to provide enough additional support to the Durango's OEM coil springs to greatly improve its handling and absorb road shock so you can more comfortably drive to your destination.
view full answer... - How To Install The Air Lift AirLift 1000 Air Helper Springs On A 2004 Honda OdysseyI can certainly walk you through the instructions for installing the Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL60740 on the rear of your 2004 Honda Odyssey, however, we have not had a chance to install these springs on a Honda Odyssey yet. In order to install these air springs on your vehicle, you will first want to remove the factory rear jounce spring. In order to do this you must first Jack up the rear of the vehicle. Put safety stands under the frame so wheels...
view full answer... - Installing AirLift 1000 Air Helper Springs # AL60816 On 2012 Chevy TraverseI have linked you to the full installation instructions for the AirLift # AL60816. The factory bump stops you referred to are cut off, to provide room for the air spring. The hole in the upper spring seat is enlarged in order to allow the hose to pass through. This is addressed on page 4 and 5 of the instructions. When installing the air bags, it is absolutely crucial that the air lines are cut perfectly square otherwise they'll leak. We recommend using a tubing cutter like part # AL10530.
view full answer... - How to Find and Fix an Air Leak on a Compressor SystemThe Air Lift WirelessONE Compressor System part # AL25980 has an automatic pressure sensor built into the system. This means that when the air in the system falls below a certain psi, the compressor will kick on to re-inflate the system back to it's minimum psi rating. Since you have noticed the compressor starting every time you turn on the vehicle, it sounds to me like you have a leak somewhere. The easiest way to find an air leak on your system would be to inflate the system to about...
view full answer... - Leaking Air Helper Spring System on 2004 Honda PilotActually, the Air Lift # AL60740 can be used on 2WD or 4WD vehicles, I've confirmed this with my Tech Support contact at Air Lift. Usually, a leak occurs at points where the air line was cut to length. It's important that these cuts be perfectly square, so using a tubing cutter like # AL10530 to get nice clean cuts is very important. The easiest way to find the leak is to add air to the system, then take some liquid dishwashing soap and dilute it with a small amount of water. Use a small...
view full answer... - Size of Air Lines of Air Lift Load Controller Compressor System AL25856The air lines of the Air Lift Load Controller Compressor System for Air Helper Springs # AL25856 are 1/4 inch. It is highly recommended you use the Air Lift Air Hose Cutter # AL10530 for the air lines to get the most concise cut of the lines.
view full answer... - Location to Install Air Lift # AL25870 Wireless ONE Compressor System on 2009 Chevy SilveradoAccording to my Air Lift representative, you CAN install the compressor on that battery tray in the engine compartment if you wish, but please know that if you do so the high-heat environment of the engine compartment will significantly shorten the life of the compressor. Installing the compressor in that location will also negate the warranty coverage. My Air Lift rep has the same exact compressor kit on his truck, and he installed his compressor on the inboard side of the truck frame...
view full answer... - Finding and Fixing Leaks in an Air Lift Helper Spring SystemFirst, I have included a link to the installation instructions to the right for Air Lift kit # AL88299 for you. Using soapy water is the best way to find a leak in an air system. If it is leaking at a hose or fitting then replacing that hose or fitting would fix the problem. However if it is a bag that is leaking then you would need to replace the bag. Using the instructions you can reverse the installation process. When cutting air lines the cut needs to be as straight as possible....
view full answer... - Do Air Lift Helper Springs Fit 2001 Ford RangerIt's always a good idea to check, and I did verify with the manufacturer for you that the Air Lift helper springs are confirmed to fit your 2001 Ford Ranger; the correct part for your truck is the following: - Air Lift Ride Control Air Helper Springs # AL59516 These helper springs are going to do a superb job of enhancing the suspension of your Ranger, keeping your truck level and balanced, particularly with a load in the bed or when towing. The only other thing I recommend, in order...
view full answer... - Is the Air Lift Ride Control Air Helper Springs a Complete Kit for a 2001 Toyota TacomaThe Air Lift Ride Control Air Helper Springs, # AL59537, is a complete kit for your 2001 Toyota Tacoma, however, some drilling will be necessary. If you haul heavy loads with your truck, then it is recommended to install a spacer on the jounce bumper strike plate. The spacer is provided, but you will need to drill a 3/8 inch hole in the jounce bumper strike plate to install the spacer. You will also have to drill into the sides of the frame rail to install the upper bracket. There will...
view full answer... - How to Check Air Lift LoadLifter 5000 System for LeaksI have seen some instances of the Air Lift LoadLifter 5000 # AL57338 of having leaks, but these are mostly due to not having a completely squared off cut on the air lines and air leaking from the tubes; not the bags themselves. You'll want to try removing the line, re-cutting the line totally square and then reinstalling it on the bags; after a couple of days check the pressure on the air bags to see if you're still losing air. If you're still losing air, it's possible that the bags have...
view full answer... - Air Lift Suspension Recommendation For 2008 Dodge Grand CaravanThe Air Lift Vehicle Suspension, part # AL60814, is designed to fit your 2008 Dodge Grand Caravan. These air springs fit inside the coil springs of your Grand caravan and will help load-leveling support up to 1,000 lbs. This system will not increase the vehicle load-carrying capacity. To make sure the air lines are cut perfectly when installing, I recommend the Air Lift Air Hose Cutter, part # AL10530. To avoid the hassle of manually adjusting the air pressure in the air springs, you...
view full answer... - Are Air Bags for 2016 Ram 2500 Able to Support Weight of 5th Wheel TrailerThe Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88289 will definitely be able to support the weight on the rear of your son's 2016 Ram 2500 because they have a 5,000 lb capacity, and the pin weight on the back of your son's Ram is going to be in the range of about 2,500 lbs (in the area of 15% to 20% of the trailer's full weight). So yes your son's towing needs will absolutely be met by installing the Air Lift LoadLifter 5000 # AL88289. I do strongly recommend using a compressor...
view full answer... - Do Air Helper Springs for Coil Springs Add Lift to 2016 Chrysler Town and CountryYou won't get any lift on your 2016 Chrysler Town and Country when using the Air Lift AirLift 1000 Air Helper Springs for Coil Springs # AL60814. The springs are designed to level out and support the rear suspension of your vehicle when it is sagging, but won't otherwise gain any additional lift. In addition to the helper springs, I do recommend adding a compressor to make it much easier to maintain their pressure, the Air Lift Load Controller II Compressor System # AL25592. I have added...
view full answer... - Air Helper Springs for 2005 Jeep Wrangler SuspensionYes the AirLIft 1000 Air Helper Springs # AL60811 are compatible with your 2005 Jeep Wrangler as long as your lifted coils have the exact same inner diameter as the factory coils. If they're different then we will need to know the inner diameter to choose the correct air bags. I've included a video of them being installed in a 2004 Wrangler which will be the same process as yours. If you're looking for a compressor # AL25592 will allow you to adjust the air pressure in the helper springs...
view full answer... - Recommended Air Bags For 2012 Ram 1500 Sagging When Towing Travel TrailerAppreciate the photos, and they show you definitely have some sag, so air suspension is going to be exactly what you need to level out the ride on your 2012 Ram 1500. The best option for your truck are air bags that replace the factory jounce bumper, with the correct part number being the following: - Air Lift LoadLifter 5000 Air Helper Springs # AL57365 These install where your truck's current jounce bumpers are, giving you the best support for the back end of your Ram. When you are...
view full answer...
- How to Remove Hose Line from Fitting for Air Lift Load Controller Compressor SystemTo release an air line from one of the T-Pieces # AL21838 that came with your Air Lift Load Controller Compressor System # AL25856 you just need to put even pressure on the circular piece that the hose slides into. If you check out the attached video you can see our install team doing this at the 1:36 minute mark with a boxed wrench. To make sure you make a clean cut on your hose be sure to use a hose cutter like part # AL10530. I have attached a photo showing which direction you need...
view full answer...
- How Often Should Air Lift Air Helper Springs For 2016 Toyota Sequoia 4WD Be InflatedWhile there are no Timbrens that fit your 2016 Toyota Sequoia 4WD, the air helper springs you asked about will fit, with the correct part for your Sequoia being the following from Air Lift: - Air Lift 1000 Air Helper Springs for Coil Springs # AL60826 In regards to filling them, there isn't a specific set amount of time, but they need to have a minimum of 5 psi in them at all times, and need to be checked for pressure at least once per week. Since the vehicle will be outside and you do...
view full answer...
Do you have a question about this Hand Tool?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Joshua S
Installed by:
Nicholas E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
2/28/2024
I apologize for the mistake on our part. Customer Service will be in touch to have the correct air bags shipped out.