Replacement Switch for Stromberg Carlson Electric Landing Gear
(55 reviews)
Price: $73.21
In Stock
Replacement Switch for Stromberg Carlson Electric Landing Gear
Item # LG-145236
Retail:$79.12
Our Price: $73.21
You Save: 7%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (55)
- Q & A (0)
- Videos (1)
- Photos
Stromberg Carlson Accessories and Parts - LG-145236
- Camper Jacks
- Trailer Jack
- Switches
- Stromberg Carlson
Replaces the IP-rated switch for your Stromberg Carlson electric landing gear set (LG-1, LG-2, LG-3, or LG-4).
Features:
- Replaces the IP-rated switch for your electric, tandem landing gear
- Designed for use with Stromberg Carlson models LG-1, LG-2, LG-3, and LG-4
- Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models
- Switch measures 2-1/4" long x 3-1/4" wide
- Arc resistant switch
- Mounting hardware included
- Made in the USA
LG-145236 Stromberg Carlson Replacement Venture IP Rated Switch for Fifth Wheel Landing Gear
Installation Details
California residents: click here
Video of Replacement Switch for Stromberg Carlson Electric Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Trailer Jack LG-145236 Review
Today we're going to review part number LG-145236. This is the Stromberg Carlson Replacement Switch for the Stromberg Carlson electric landing gear. This part will replace the IP-rated switch for your tandem landing gear. It is designed for use with the Stromberg Carlson LG-1 landing gear, and we do sell that product separately on our website. The switch is a toggle switch as you can see. When you push it, you can extend, and push it to retract.
It does come with about a 4' length of wire and it comes with the wires to connect to the motor, and then the wires to connect to the power source. This will also work with most other brands of electric landing gear including Atwood and Lippert. Comes with everything shown here, the switch with the harness, the instructions and set of screws for mounting it. The switch, give you a measurement. On the mounting bracket itself is 2 1/4" wide by about 3 1/4" tall. That should do it for the review on part number LG-145236.
This is the Stromberg Carlson Replacement Switch for the Stromberg Carlson electric landing gear.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- etrailer mistake
- Alternate product found
- Arrived Damaged
Customer Reviews
Replacement Switch for Stromberg Carlson Electric Landing Gear - LG-145236
Average Customer Rating: 4.9 out of 5 stars (55 Customer Reviews)
Replaces the IP-rated switch for your Stromberg Carlson electric landing gear set (LG-1, LG-2, LG-3, or LG-4).by: Jimmie D03/10/2023
Service was very quick and it was shipped in a few hours after I ordered it. Part was spot on!!
by: Steve S.04/27/2015
Top notch quality, and great service.
These parts were used to upgrade a 5th wheel camper with manual crank for the landing legs. The motor fit perfectly my Atwood landing legs gear drive, and the switch was an easy install, with good directions on wiring install.
They are working like a champ. Thak goodness, there will be no more manual cranking of the landing legs for me… ;)
by: Kevin04/27/2018
Bought these to run dual landing gear motors. Switch was pre wired for reverse polarity motors, making install easy. Fast shipping and well made.
by: Terry 09/28/2023
Great customer service. Chelsea is very knowledgeable about the replacement part that we needed. Super quick at processing the order and getting the items ordered, to us earlier than expected. Excellent!!!
by: Michael04/28/2023
Gear box worked great. It was the legs that was the problem. Replaced the legs with the bulldog individual leveling and everything is working great.
by: Matt W09/11/2016
Switch is exactly what I needed. I bought my fifth wheel camper used and the original owner must have added the power feature to the landing gear. He used a regular DPDT toggle switch and cobbled up a mount. Switch was not rated high enough for the max DC amps that the landing gear motor was rated for. I decided that I needed to install a proper landing gear switch kit and etrailer's experts answered my product question promptly as this was the only switch that was listed as weatherproof. I needed to install in existing switch location and did not have a switch compartment. Switch seems quality and is proper rated to handle the landing gear motor. Wires are heavy gauge also which I like. It seems that my landing gear travels faster than it did with the old switch and lighter gauge wiring.
Matt W.
9/11/2017
Works the way it should. Nice to not burn out an underrated switch twice a season. Has worked flawlessly for over a year. Rain or shine.
by: Floyd04/04/2018
etrailer got my order late on a Friday, mailed it on Saturday and sent me tracking info. Great service. My landing gear was not a Stromberg Carlson, so I had to drill a couple of hole, shorten some really long wires, and reverse the wires to the motor, but it all worked fine and solved my problem. Very grateful for having it behind me in such a short time.
Floyd
4/4/2019
Have not used it for about 3/4 of the past year, but assume that it still works fine. Thank you for your excellent service
by: William09/03/2023
Outstanding Performance
by: Bruce04/12/2019
Installed new switch yesterday,exact match and easy to install. Product received in less than a week . E trailer is great a company and Crystal was very impressive to work with,knowledgable, polite and polite. She is an asset to your company. Will definitely use e trailer whenever needed !
Bruce
4/12/2020
Still working flawlessly,will definitely use your company again when needed
by: Ken 11/10/2022
Switch works well. However, no wiring instructions were included. I wired red-red, and black-to-black. This caused jacks to go up when pressing down. A quick wiring switch made everything work correctly. Flawless ever since.
by: Keith04/08/2019
Product recommended was perfect fit for my 2007 5th wheel. Fast shipping. All parts and hardware included. Easy installation to replace my existing landing gear, motor and switch. Great company to buy from. Thanks Etrailer
by: Michael 06/08/2020
Product was top-shelf quality and a huge improvement over the OEM switch my Geneisis Supreme came with. E-Trailer was terrific to deal with and order shipped promptly. If you need a replacement Landing Jack switch, this product will satisfy!!!
by: John P.06/29/2015
Fast shipping. Improved quality switch with instructions included.
John F.
6/28/2016
This switch is very well made and is superior to the OEM jack switch I replaced on my fifth wheel.
by: Paul10/04/2016
At the time I traded the 5th wheel in they were performing as advertised.
by: Michael09/11/2018
I replaced a lesser quality switch with this one and could not believe the difference it made. It's as though the previous switch was not letting full electrical current through to the motor. Now the motor is quieter and appears to work easier.
by: Dennis02/10/2019
Replaced switch for jacks on front of fith wheel. Colored coded to match old switch which made it an easy change out.
by: Donna12/20/2018
So far so good. Fifth wheel jack switch is working well.
by: Duane08/26/2016
This hard wire harness worked perfect for the application and I was able to connect it in about 5 minutes
by: Billy W11/08/2013
Excellent, Better Than The Original Equipment.
etrailer.com is an exceptional place to buy parts, everything was as they advertised . service and delivery was very good.
keep up the good work,nice to deal with you folk, will use in future.
by: Richard D08/26/2017
Haven't installed it yet... but appears to exactly match previous switch that I installed... now both jacks will be independently controlled. Fast service too!
by: DeanJ 10/14/2018
Heavy Duty wiring , everything you need to replace the jack switch on a 5th wheel rv
by: Darrell05/31/2019
I installed the switch and ran the wires like the drawing showed and it works fine, goes up and down like it used to. Thanks, Will buy from again. Darrell
.
by: Mark546106/24/2016
Out of the box the item looks like a direct replacement for the bad switch. It was nice to see a wiring diagram included with the package.
by: Bob W04/22/2017
Easy installation, works great...better than the original switch.
by: Tony B11/10/2017
Perfect fit, works great.
Great Company to deal with.
Tony B.
11/10/2018
Its been a year, and the switch is working great. No failures, or sticking. Id definitely buy from here again.
25
55
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Can a Lippert Manual Landing Gear Set Be Converter to a Dual Motor SetupIf you are looking for a way to convert your landing to a dual motor setup there's really no way to do that without replacing the follow leg with a lead leg, adding a motor and gear box, adding an additional switch and eliminating the cross shaft. For a lead leg you would need part # LC179013, for a gear box # LG-179015 and then motor # LC142178 and switch kit # LG-145236. The follower leg cannot have a gear box attached to it.
view full answer... - What Is The Difference Between The Landing Gear Set RVLG-8000 & RVLG-8HDL?The only difference between the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-8HDL that you mentioned, and the Landing Gear Set # RVLG-8000 is that # RVLG-8HDL comes with the handle, whereas if you were to go with # RVLG-8000 you'd need to purchase the handle separate with # RVLG-HDL. Both of these systems are rated for the same 8,000lbs capacity limit, and have 36-1/2" of total lift. Additionally, both of these can also be upgraded from manual to electric...
view full answer... - Is Replacement Gearbox for Landing Gear with Atwood 75721 Motor AvailableI did some checking and it looks like there aren't any replacement gearbox or even motor parts for your Atwood landing gear so if you believe that the issue is related internally you will unfortunately need to get a new landing gear set. The 8K Landing Gear Set # RVLG-8000 should fit directly with what you have as the weld stop locations are the typical 15-1/2" and 171/2" measurements (see attached photo). You can use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 with the...
view full answer...
- Replacement Landing Gear Switch for 1A065012-02-01The correct replacement landing gear switch for your 1A065012-02-01 is the Replacement Switch for Stromberg Carlson Electric Landing Gear # LG-145236.
view full answer... - Replacement Motor For Stromberg Carlson Landing Gear 1A065012-02-01The replacement motor you need is the Replacement Motor for Stromberg Carlson Electric Landing Gear, part # LG-142178. The replacement gearbox needed for this motor is part # LG-179015. If you need a switch for this motor, you can use part # LG-145236.
view full answer... - Replacement Motor for Venture 9000 Powered Landing GearThe Lippert Components HD 6500-lbTuson 5th Wheel RV Landing Gear Motor # LC196308 is intended for use with their heavy-duty 6500-pound-rated Tuson Landing Gear but it will also work on other Lippert/Venture powered landing gear. The standard replacement motor for the Venture landing gear is part # LG-142178. If you need the corresponding motor control switch for this use part # LG-145236.
view full answer... - Part # LG-145236 Blowing Fuse When Switch Is UsedThe fuse popping on your 2021 XLR Toy Hauler after installing # LG-145236 sounds like there is a problem in the wiring somewhere. I would check to make sure you have the correct black wire going to the battery. One of the black wires is a ground and the other is going to be the extend or retract for the jacks.
view full answer... - Replacement Landing Gear Needed for 2006 CL4005 5th Wheel TrailerI have a recommendation for a completely new landing gear set but if you're wanting to just replace your motor and gearbox then I'd need to know what exact 5th wheel landing gear kit you have installed to see if we have something that is compatible. For a replacement landing gear set I highly recommend the Landing Gear Set # RVLG-8000 because it uses the standard 15-1/2" and 17-1/2" weld-stop locations plus it has an 8,000 lb weight capacity. This comes with a gear box installed so you...
view full answer...
- Replacement Switch For Landing Gear On A 2021 XLR Boost 5th WheelThe good thing is that the switches are pretty much universal. For your 2021 Forest River XLR Boost 5W Toy Hauler, I recommend replacing your switch with the Replacement Switch for Stromberg Carlson Electric Landing Gear Item # LG-145236. If you have Hydraulic landing gear I recommend the Replacement Control Switch for Lippert Hydraulic Landing Gear - White Item # LC138415 As far as installation, the colored wires may not be exact matches to the color wires on your camper so just make...
view full answer... - Replacement Landing Gear Set for a 1991 Avalon 5th Wheel TrailerTo choose the correct replacement landing gear set you simply need to determine the spacing between the weld stops on your current landing gear set. The standard measurement is 15-1/2" inside to inside or 17-1/2" outside to outside. For this measurement I recommend the Landing Gear Set # RVLG-8000 because it gives you 36-1/2" of lift and is rated for 8,000 lbs. For this you can either use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 and Switch # LG-145236 for operation. If...
view full answer...
- How to Run Wiring for Replacement Landing Gear SwitchIf you are using either the Lippert Components Landing Gear Switch # LC145236 or the Stromberg Carlson Landing Gear Switch # LG-145236 you will connect the red wire without the fuse along with the longer black wire to the red and black wires on your motor. The short black wire will be run to the battery's negative post and grounded and the pink or red wire with the fuse will be connected to the battery's positive post.
view full answer...
- Is Replacement Gear Set Available for Lippert Landing Gear on Montana 5th Wheel RVI reached out to my contact at Lippert who said that there unfortunately are no repair kits available for your landing gear legs so you will need to replace them. If you'd like exact replacements we have those exact legs here are parts # LC179013 and # LC179014. If you wanted a more cost-effective alternative then we have the Landing Gear Set # RVLG-8HDL which operates manually but can be upgraded to electric with the motor # LC142178 and switch # LG-145236. The installation is pretty...
view full answer... - Will etrailer Landing Gear RVLG-8000 Fit a 2004 Sprindale 249BH 5th Wheel TrailerThe standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the landing gear legs which is what etrailer set # RVLG-8000 uses. Provided your old landing gear is the same this kit will fit. If you want to add the manual crank handle it is # RVLG-HDL. And you can also add a motor using # LC142178 and switch # LG-145236 to make it a powered set.
view full answer...
- Can Lippert Trailer Landing Gear Have Motor Added to ItYou can add the Lippert landing gear motor part # LC142178 with the switch kit part # LG-145236 to your Lippert landing gear and you'd be set.
view full answer... - Will etrailer Landing Gear RVLG-8000 Fit a 1994 Terry 5th Wheel TrailerLanding gear set # RVLG-8000 will likely fit your 1994 Terry 5th wheel trailer. The size of the jack tubes are standard for 5th wheel jacks and the stop in the legs for the frame clamps have a standard spacing. I have included a picture showing the stop measurements on the legs so you can compare that to your existing set. If that and the other measurements match up then this kit is a great option. The hand crank is available as a separate item and is part # RVLG-HDL. Or you can add a...
view full answer...
- Explanation of Landing Gear Switch Operation The Replacement Switch for Stromberg Carlson Electric Landing Gear # LG-145236 will be open and not moving in the middle position. The switch will close and complete the circuit to give you the extend or retract functions of the switch.
view full answer... - Replacement Landing Gear Switch for Model Number 1A065012-02-01The correct replacement switch for your electric landing gear model number 1A065012-02-01/1-065-041012-01 is the Stromberg Carlson Replacement Switch # LG-145236. The switch itself measures 2-1/4 inches long and 3-1/4 inches wide. The required mounting hardware is included. I have attached a short video demonstration on this product for you to check out.
view full answer... - Can a Motor Be Added to Lippert/Venture Landing Gear JacksMy contact at Lippert Components confirmed that their manual landing gear # LC333966 can indeed be converted to powered operation later on through use of their motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the manual landing gear. There would be no need to convert the follow leg to the shaft of a lead leg. Venture and Lippert landing gear brands are the same. If you are looking for a way to convert your landing to a dual motor setup...
view full answer... - Recommendation for Replacing Bevel Gears for Atwood Landing Gear or Replacing Entire Landing GearSince Atwood is no longer in the landing gear making business and you have an older 5th wheel trailer I recommend just replacing your entire landing gear set. This not only gives you peace of mind that everything is in good shape but it also makes tracking down replacement/repair parts in the future much easier. For your application I recommend the Landing Gear Set # RVLG-8000 which has up to a 36-1/2" lift and is rated for 8,000 lbs. This cost-effective option comes with the landing gear...
view full answer...
- Replacement Landing Gear Motor, Gear Box and Switch for Model 1A065012-02-01The correct replacement motor is part # LG-142178, and the Replacement Aluminum Gearbox, # LG-179015. The correct replacement switch is the part # LG-145236.
view full answer... - Replacement Landing Gear for 1989 Nu Wa Hitchhicker 5th Wheel TrailerThe Landing Gear Set # RVLG-8000 will work but you will have to have the weld stops removed and new ones welded on. If you check out the attached picture you can see where the inside distance of the weld stops measures 15-1/2". Even with those brackets mounted on the inside the distance between them would be about 11-1/2". Even though you will have to have the weld stops relocated I recommend using this landing gear set because I have never heard of the weld stops being located where...
view full answer...
- Atwood 87701 landing gear switch replacementThe Atwood 87701-SP three-switch panel that you referred to is now obsolete, no longer made, and none in stock. The only wiring information I could find for you is a poor quality drawing from Atwood/Lippert which I have attached. We do not have this part, or similar one, available. The only solution would be to create something using other parts like the Stromberg # LG-145236 or the JR Products # 37213635 switches. If it were me I would omit the center switch (both legs at once) and...
view full answer...
- Troubleshooting Landing Gear That Stopped MovingIf your landing gear is motorized, the motor works fine and the gear looks good you will want to test the switch; use a 12V battery to get power to the wire that signals the gear to extend. If it does extend with the 12V battery, the issue is the switch and the replacement you'd need is # LG-145236. However, if you have tried to manually operate the landing gear and cannot move it at all, then the unit would need to be replaced. For that you can use the Stromberg Carlson Electric Landing...
view full answer...
- Motor and Switch Parts to Convert Landing Gear Set RVLG-8000 to Powered OperationThe gear box included in the etrailer Landing Gear Set # RVLG-8000 has pretty much standard dimensions, approximately 5-1/2-inches wide x 7-inches tall. It should fit in the same space as the original. The motor assembly that converts to a powered landing gear setup, part # LC142178, bolts right up to the gearbox. The switch is NOT included with the motor but we offer part # LG-145236.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Sarah H
Installed by:
Jeff D
Updated by:
Shelly K
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Matthew E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jimmie D.
3/11/2024
Product is still working well with no issues.