Solera Manual Crank-Style Arms for Short RV Awnings - 61-1/2" Long - Black

See what our Experts say about this Lippert Accessories and Parts

• Is Solera 61 Short Awning Support Arm # LC351829 Sold Individually or a Pair
  The Solera 61" Short Awning Support Arm # LC351829 that you referenced is sold as a pair.
  view full answer...
• Replacement Awning Arm for Solera Awning Measuring 61 inches
  Since the length you measure is 61 inches you do need the replacement short support arm part # LC351829 that you referenced to replace what you have. This part number is for a pair of arms.
  view full answer...
• Replacement Solera Awning Support Arm with Integrated Gas Strut
  The Solera 61" Short Awning Support Arm, Black # LC351829 is sold as a pair. This arm assembly is functional and durable. It comes complete with a gas strut for stability as well as ease of extension and retraction. It has an innovative friction joint to adjust the awning with one hand to drain off rain water and does not need to be readjusted before retracting the awning. This arm can be used with both power and manual awnings.
  view full answer...
• Availability of 63 Inch Replacement Support Arm for Solera Awning
  The correct replacement 63" Awning Arm Assembly for your Solera Awning is part # LC404523. I've confirmed this with Lippert, the manufacturers of Solera Awnings.
  view full answer...
  
• How To Replace Power Awning Arms with Manual Awning Arms On a Coleman Light Trailer
  The Solera Manual Hardware for Short Awnings part # LC351829 should work just fine on a Coleman Light Trailer to replace a power awning. That said, you would want to verify the length first to be sure.
  view full answer...
  
• Are There Replacement Parts for the Solera 61 Short Awning Support Arm
  The Solera 61" Short Awning Support Arm part # LLC351829 (a pair) is sold as a complete assembly. The individual components are not available as a replacement unfortunately.
  view full answer...
• Available Replacement Arms for Solera Awning
  There is a solution for you, though the upper pitch arm you referenced is not available as an individual piece. It will come with a support arm assembly, and the one you need is going to depend on the length of the wall-mount extrusion from top to bottom. The short style measures 61-1/2" and uses # LC351829 while the flat style will measure 69" and use # LC281154.
  view full answer...
  
• What to Measure When Selecting Replacement Awning Support Arm
  The instructions on what to measure are a bit confusing: "measure the length of the wall-mount extrusion from top to bottom." What that means is you will measure the length of the part that mounts to the wall of the camper as opposed to the arm itself. The short style measures 61-1/2" and uses # LC351829 (a pair), while the flat style will measure 69" and use # LC281154.
  view full answer...
• Replacement Solera 69 inch Standard Flat Awning Support Arm
  Sounds like you are looking for the Solera 69" Standard Flat Awning Support Arm Black # LC281154.
  view full answer...
• Awning Options for an In-Bed Truck Camper
  Hey Nessa, great question! We do have some shorter arms with the kit # LC351829 which has 61-1/2" long arms in a black color, and then we have a variety of awning fabric lengths and colors to choose from (see attached link). We also have some alternative awning options like ones that work with windows or the Thule HideAway Awning # TH490011 that mounts to a wall so it's a bit more universal than most other awnings.
  view full answer...
• Is the Solera 19 Foot Sand Fade RV Awning LCV000231497 a Complete Kit with Hardware
  The Solera 19 Foot Sand Fade w/ Black Weather Guard RV Awning # LCV000231497 referenced in your question will include the awning itself and the roller tube. You will need to add a Manual Hardware Kit like the Kit for Short Awnings # LC351829. The style you choose will simply depend on whether you are wanting a short awning, regular height awning or pitched, as well as the color. I have included a link that will take you to our available selection of hardware kits. You will also need...
  view full answer...
• Replacement Awning Arm For A 2018 StarCraft Autumn Ridge Outfitter
  The 69" is the length of the Solera Standard Flat Awning Support Arm Item # LC281154. There is no way for me to tell what you have on your 2018 StarCraft Autumn Ridge. You would need to measure the arm you have. Short styles will measure 61-1/2", pitched styles will measure 66-1/8" and flat styles will measure 69". Solera 66-1/8" Pitched Awning Support Arm, Black Item # LC266169 Solera 61" Short Awning Support Arm, Black Item # LC351829 (a pair)
  view full answer...
• Replacement Arms for Solera Awning on 2020 Jayco Eagle 5th Wheel
  What you heard is correct, the 59-1/2" arm assembly you currently have is no longer available. The 63" arm is what you are looking for. You can either use the black # LC404523 or white # LC97UD replacement arms which will work for both sides. There is no need to replace the heads since your existing heads will work with these arms.
  view full answer...
• Recommended Replacement Arm For Solera RV Awning
  The replacement arms we offer for RV Awnings are designed to fit the Solera awnings. Finding the correct arm depends on the measurement of the wall-mount extrusion from top to bottom. I have attached a link to the product page on our website you can check out. We offer three different Black awning arms replacements. If you have the Solera Awning and need the shorter 61-inch arm you can order part # LC295743. If you have the standard flat awning you can order the 69-inch arm, part # LC281154....
  view full answer...
  
• Which Replacement Arm for Solera Awning With 69 Inch Wall Bracket and 63-1/2 Inch Arm
  It sounds like you've got a damaged Solera 69" Standard Flat Awning Support Arm, Black # LC281154 and I may have a solution for you, but the inner arm portion of that is not available as a replaceable part. For that reason you would need a completely new # LC281154 for your awning, which would re-use your Driver head. If you also need a new driver head then you can use the Solera Manual Pull Style Awning Drive Head, Black # LC272067 for a pull style awning or the Solera Manual Crank Style...
  view full answer...
• Replacement Support Arms For Lippert Solera Awnings
  We do have options for you, though the part you are referring to which the gas strut attaches to in the middle is not available as an individual part, as it only comes as part of a support arm assembly. We do have those available, in either black or white, and you will need to choose yours by length. The length you need to know (or measure) is the length of the awning's wall-mount extrusion from top to bottom. Once you know that you can choose from the following: - Solera 61" Short Awning...
  view full answer...
• How to Pick Out Correct Awning Arm Replacement
  To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part # LC351829 (pair) Pitched styles will measure 66-1/8" and use part # LC266169 (single arm) or # LC351825 (pair) Flat styles will measure 69" and use part # LC281154 (single arm) or # LC434727 (pair) All replacement arms can be used on both power and manual...
  view full answer...
  
• Replacement Gas Strut for Solera Awning
  The frame length of your Solera awning won't matter as much as the type of awning arm that you've got will. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm # LC351829 (a pair) or Flat Awning Support Arm # LC281154) you will need the Solera Gas Strut 26", 124 lbs for Short and Flat Awning Arms # LC280343. For pitched awning arms such as Solera 66-1/8" Pitched Awning Support Arm # LC266169 you need the Solera Gas Strut...
  view full answer...
• Which is Correct Gas Strut for Solera Awning
  The correct gas strut for your powered or manual Solera awning will simply depend on which Solera awning arm assembly you have. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm # LC351829 for a pair or Flat Awning Support Arm # LC281154) you will need the Solera Gas Strut 26", 124 lbs for Short and Flat Awning Arms # LC280343. For pitched awning arms such as Solera 66-1/8" Pitched Awning Support Arm # LC260294...
  view full answer...
• What to Measure For Replacement Solera Awning Support Arm
  In order to get the correct replacement support arm for your Solera awning, what you want to do is measure the wall mount of your awning. All you need to do is measure the length of that mount, and that measurement will let you know which support arm from the following options you need to get. - 61 Inches - Black: Solera Short Awning Support Arm # LC351829 (a pair) - 63 Inches - White: Solera Short Awning Support Arm # LC97UD - 66-1/8 Inches - White: Solera Pitched Awning Support Arm...
  view full answer...
  
• Picking Out Replacement Arms for Solera RV Awnings
  To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. Short styles will measure 61-1/2" and use part # LC351829 (pair) Pitched styles will measure 66-1/8" and use part # LC266169 (single arm) or # LC351825 (pair) Flat styles will measure 69" and use part # LC281154 (single arm) or # LC434727 (pair) All replacement arms can be used on both power and manual awnings.
  view full answer...
• Do Solera Awnings Come with Everything Needed to Install
  The Solera 18' White Fade RV Awning Roller and Fabric # LCV000211510 comes with everything needed to attach to any awning arm setup your camper would have. It comes with an awning rail too if you didn't have one, but you'd need a few other components too if your camper does not have an awning at all. In addition you will need: Solera Manual Pull Style Awning Drive Head # LC272067 Solera Manual Crank Style Awning Idler Head # LC273479 Solera Manual Awning Pull Strap # LC292794 Solera Standard...
  view full answer...
• Can Awning be Added to 20 Foot Long Enclosed Trailer
  The Solera 18 foot Black Fade Awning Roller and Fabric # LCV000211505 includes the roller and the fabric of the awning. It does not have the arms or any mounting hardware. In addition you will need: Solera Manual Pull Style Awning Drive Head # LC272067 Solera Manual Crank Style Awning Idler Head # LC273479 Solera Manual Awning Pull Strap # LC292794 Solera Standard Flat Awning Support Arm 69 inches # LC281154 or 61 inches # LC351829 (a pair) The only thing we don't offer is an awning rail...
  view full answer...
• Parts Needed to Add an Awning to an Enclosed Trailer
  The Solera 18 foot Black Fade Awning Roller and Fabric # LCV000211505 includes the roller and the fabric of the awning. It does not have the arms or any mounting hardware. In addition you will need: Solera Manual Pull Style Awning Drive Head # LC272067 Solera Manual Crank Style Awning Idler Head # LC273479 Solera Manual Awning Pull Strap # LC292794 Solera Standard Flat Awning Support Arm 69 inches # LC281154 (one arm) or 61 inches # LC351829 (a pair) - You'll need two arms, one for each side
  view full answer...

Do you have a question about this Accessories and Part?