Availability of 63 Inch Replacement Support Arm for Solera Awning

Question

Question:

I need on support arm but when I measure my wall mount it measures 63”. Am I measuring something wrong or do you offer a 63 “ arm Thank you

asked by: Jeff K

0

Expert Reply:

The correct replacement 63" Awning Arm Assembly for your Solera Awning is part # LC404523. I've confirmed this with Lippert, the manufacturers of Solera Awnings.

expert reply by: Mike L

0

click to enlarge

Answer 1

The EC code on your Fogatti RV Tankless Water Heater - Gas - Automatic Pilot - 41,800 Btu - Black #LSB44FR means the pilot light tried to ignite but could not due to low gas pressure. If the control panel is displaying error codes then it is working…

view full answer...

Answer 2

From the research I did on your tire size of 8.55-15ST that would indicate that the modern tire size equivalent is ST225/75R15 which is a very common tire size. The Provider trailer tire part #TTWTRTM2257515D is a great option for that size. It has a…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 8

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please…

view full answer...

Answer 9

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 10

Thank you for the detailed description of the replacement vent lid you need for a motorhome's 14 x 14-inch roof vent that uses a continuous hinge. We offer complete vent assemblies but also just the lids too, and in most hinge styles, including…

view full answer...

Answer 11

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 12

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

Availability of 63 Inch Replacement Support Arm for Solera Awning

Product Page this Question was Asked From

Continue Researching