Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs - 58" Long - Black

See what our Experts say about this Lippert Accessories and Parts

• Replacement 58 inch Arm for Solera Edge RV Awning
  Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part # LC22ED or for a replacement idler arm part # LC62ED.
  view full answer...
• Replacement Pitch Arm Assembly for a Lippert Edge Awning on a 2022 Forest River Cherokee Alpha
  The small pitch arm is not offered separately for the Lippert Edge awning you have, so you'd have to replace the entire assembly with the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED and the Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs # LC62ED.
  view full answer...
• Correct Replacement 58" Awning Arms for a 2021 Forest River Cherokee Wolf Pack
  For your 58" long arms, you're going to need the Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs # LC62ED for the Idler arm, and Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED for the drive arm.
  view full answer...
• Replacement Awning Arms for Lippert Edge 58 inch Awning
  For your 58 inch Lippert Edge RV awning the correct replacement idler arm is the part # LC62ED and the correct replacement drive arm (one with the motor) is the part # LC22ED.
  view full answer...
• Replacement Arm Assembly For A 58 Inch Lippert Edge
  We have just the replacement arm for you! Depending on if you need the drive arm or the idler arm we both options available. The Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED is 58 inches long and will replace the drive arm on your Lippert Edge. The Replacement Idler Arm Assembly for Lippert Edge # LC62ED is the same but for the idler arm. Both come in a white color. You will have to use your current hardware to mount them.
  view full answer...
• Replacement For Black 58" Support Arm Assembly for Lippert Edge Awning
  We did have the Black version as part LC62ED but that was unfortunately discontinued so you'll either need to use the White idler assembly with your current black drive assembly or you'll need to swap out both assemblies for a matching White set: - Idler Assembly # LC62ED - Drive Assembly # LC22ED
  view full answer...
• Replacement 58 inch Awning Arm Solution for 2022 Forest River Wof Pup 14cc
  Since you said you have the 58 inch arms that would indicate that you have the Lippert Edge awning which we have just the replacement arms for. For the idler arm you'd want the part # LC62ED and for the driver arm part # LC22ED.
  view full answer...
• Replacement Awning Arms for a Lippert Edge Awning
  The Replacement Support Arm Assembly for Lippert Edge 58" Awning LC77VR has been discontinued, however we do have it's replacements the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED and the Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs # LC62ED. Both of these parts will work great with your Lippert Edge awning and measure the same 58" as the previous did.
  view full answer...
• Replacement Drive Side Arm Assembly for Lippert Edge Awning
  The correct arm assembly for your Lippert Edge is the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs - White # LC22ED. I confirmed this with my contact at Lippert.
  view full answer...
• Will Replacement Lippert Edge Support Arm Assembly Work for a Forest River Wolf Pup
  The Lippert Arm Assembly # LC22ED is for an Edge awning comes with the drive head so you can use that part or the Arm Assembly # LC62ED for the idler head. These come with the LEDs on them as well. If you have the Edge awning on your Wolf Pup then these arms will work for you!
  view full answer...
• How to Measure for Replacement Awning Arms on a Lippert Edge Awning
  In order to determine the correct replacement for your Lippert Edge awning you'll need to measure the length of your wall mount (see attached photo). Once you've got that number you can look for a replacement based off of that measurement. Since you mentioned you've got 58" arms, you'll want the Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs # LC62ED & the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED. If you've re-measured and determined...
  view full answer...
  
• Replacement Arms For A Lippert Edge RV Awning Assembly
  Hi Ron, The replacement arms for a Lippert Edge RV awning only come with their respective heads/motor included so you won't be able to purchase just the arm without the head. For the drive side you'll need part # LC22ED and for the idler # LC62ED.
  view full answer...

Do you have a question about this Accessories and Part?