Parts Needed to Add an Awning to an Enclosed Trailer

Question

Question:

Solera 18 foot Black Fade RV Awning Roller and Fabric Std Does this come with everything needed to mount to an enclosed cargo trailer? Does is have support poles at the end away from the trailer or tilt out support arms?

asked by: Michael R

1

Helpful Expert Reply:

The Solera 18 foot Black Fade Awning Roller and Fabric # LCV000211505 includes the roller and the fabric of the awning. It does not have the arms or any mounting hardware. In addition you will need:

Solera Manual Pull Style Awning Drive Head # LC272067
Solera Manual Crank Style Awning Idler Head # LC273479
Solera Manual Awning Pull Strap # LC292794
Solera Standard Flat Awning Support Arm 69 inches # LC281154 (one arm) or 61 inches # LC351829 (a pair) - You'll need two arms, one for each side

expert reply by: Charles S

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

We do carry some Lippert Hydraulic jacks but none by those part numbers. I tried looking them up on Lipperts site and found nothing on the 2571254 number and the 25712510 seems to have been superseded by a jack with a 14,000 lb. capacity, but not one…

view full answer...

Answer 3

The underside of the Solera Smart Arm 12V Power RV Awning #LC517505 that you referenced is black. Normally black does get hot but that's only if the color is seeing direct sunlight. Since it's the underside of the fabric it would not see…

view full answer...

Answer 4

Yes you could use the Solera 12V Power RV Awning Conversion Kit part #LC434724 to convert your A and E two step awning to a powered electric awning.

view full answer...

Answer 5

The correct replacement air conditioner shroud you need for your Coleman Mach 3 8333-8766 is the MaxxAir TuffMaxx Replacement Shroud part #MA00-325001. This shroud will be an exact replacement and comes with stainless steel mounting hardware. It is…

view full answer...

Answer 6

The Replacement 1/4 Turn Cartridge Set part #PF287033 is designed to be used with Catalina faucets that have a lever handle. If this is the type of faucet you have then yes it will work for you. Unfortunately, I do not know what type of faucet is on…

view full answer...

Answer 7

The V000315205 comes back to an 18' Solera awning with a solid black fabric and LED light strip so if you're looking for just the fabric/light strip you would need part #LC86TF. If you want to replace just the fabric and reuse or go without…

view full answer...

Answer 8

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Parts Needed to Add an Awning to an Enclosed Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching