What to Measure For Replacement Solera Awning Support Arm

Question

Question:

How do I measure my awning arm

asked by: Brent A

0

Expert Reply:

In order to get the correct replacement support arm for your Solera awning, what you want to do is measure the wall mount of your awning. All you need to do is measure the length of that mount, and that measurement will let you know which support arm from the following options you need to get.

- 61 Inches - Black: Solera Short Awning Support Arm # LC351829 (a pair)

- 63 Inches - White: Solera Short Awning Support Arm # LC97UD

- 66-1/8 Inches - White: Solera Pitched Awning Support Arm # LC260294

- 69 Inches - Black: Solera Standard Flat Awning Support Arm # LC281154

- 69 Inches - White: Solera Standard Flat Awning Support Arm # LC281152

expert reply by: Kyle S

0

Where to Measure For Replacement Solera Awning Support Arm
(click to enlarge)

Answer 1

I reached out to my contact at Lippert with the measurement of your support arm and they confirmed that the Replacement Short Arm Assembly for RV Awnings #LC97UD you were looking at is the correct replacement support arm assembly for your 2021 Jayco…

view full answer...

Answer 2

We have replacement pitch arms for your awning with the part #LC266169 which fits either side of the awning. This would exactly what you'd need to get going!

view full answer...

Answer 3

The best way to find the correct replacement awning arm would be to measure the length of the existing and note the color. The Solera Short Awning Support Arm part #LC97UD for example measures 63" end to end and is white in color. If this does…

view full answer...

Answer 4

The Replacement Support Arm Assembly for Lippert 63" Short Awning part #LC97UD does not come with the motor or any wiring, you'll need to transfer the motor and wiring from your old arms. These arms can indeed be used on both the drive and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

What to Measure For Replacement Solera Awning Support Arm

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching