LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
(50 reviews)
Price: $324.94
In Stock
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
Item # FCE48TASL
Retail:$374.47
Our Price: $324.94
You Save: $49.53
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (50)
- Q & A (0)
- Photos
Furrion Accessories and Parts - FCE48TASL
- RV Camera System
- Camera
- Side Camera
- Right Side Camera
- Left Side Camera
- Furrion
- Black
Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb.
Features:
- Marker light cameras replace your clearance lights to improve visibility and obstacle detection for your RV or camper
- Minimize blind spots on both sides of your RV and help prevent accidents
- Gives you a 65-degree viewing angle
- Designed for use with Furrion Vision S backup camera system (FOS05TASF and FOS07TASF)
- DOT- compliant, waterproof marker lights with detachable cover allow easy access to replace your bulb
- CMOS sensors create high-quality digital video in full color
- 12 Infrared LED lights on the camera's housing provide night-time vision up to 39'
- Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
- Motion detection triggers monitor (sold separately) to power on
- Durable, metal construction is dust resistant and waterproof
- IP65-rated to protect against dust and low-pressure water jet spray
- Simple installation - minimal drilling required
- Mounting hardware not included
- (8) #6 x 3/4" Self-tapping screws are recommended
Specs:
- Overall dimensions: 5-3/4" wide x 3-3/8" tall x 1-3/4" deep
- Mounting hole spacing:
- Vertically (left side): 1-1/8" center to center
- Vertically (right side): 5/8" center to center
- Diagonally: 3-1/8" center to center
- Resolution: 720 x 480
- Voltage: 12V - 24V DC
- Wire length: 5"
- 1-Year warranty
Marker Light Side Cameras
Designed for use with the Furrion Vision S wireless RV backup camera systems (FOS05TASF and FOS07TASF - sold separately), these marker light side cameras are the ultimate upgrade for your RV's side marker lights. They give you the same DOT compliant marker lights with the added benefit of waterproof side cameras with LED night vision and motion detection. The cameras enhance visibility and minimize blind spots by giving you a wide 65-degree viewing angle. They also have detachable light covers for easy access to replace your bulbs.
Infrared LED Night Vision
Each camera has 12 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.
Motion Detection
When used with your Furrion Vision S wireless RV backup camera system (sold separately), the motion detect feature on the system's monitor allows you to set the motion sensitivity level of your cameras to low, medium, or high. On the low setting, your cameras will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, they will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.
2021123791 Marker Light RV Side Cameras for Furrion Vision S Systems - Night Vision - Qty 2
Replaces 733325 and 110469
Alt 405206ET
Alt FCE48TASH
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2 - FCE48TASL
Average Customer Rating: 4.7 out of 5 stars (50 Customer Reviews)
Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb.by: R03/24/2024
Work great very wide angle.
covers two lanes.
by: Bill C.03/29/2019
Great product! Easy to install and works great . The picture is very clear and system was easy to pair up with my rear view camera. Instructions were very clear. I do wish the wires were longer . I chose to install above existing light as I wanted the camera higher than the factory lamp was located.
by: Robert02/07/2024
Works great and was easy to install, excellent safety device
by: Kenneth 08/27/2022
Work great. Easy to install. No issues syncing with monitor.
by: Joseph 03/27/2023
We wanted these for our new 5th wheel that was prewired for them. It was cheaper to upgrade our 4.3 backup monitor to The 7” and add the side cameras versus buying a new setup.
by: Paul08/26/2020
Everything went smoothly and received the product in just a few days. It took less than 30 minutes to install both cameras after watching an online from strainer.
by: Charles 06/19/2021
Installed them today. My 5th wheel was pre wired so I just had to add on the cameras to the existing side marker lights. They had a plug there in the cameras place. Did notice you had to have the truck hooked up to the 5th wheel in order to get power to the cameras. Then the pairing to the monitor was very easy.
Charles E.
6/20/2022
Amazing! We pull a 39 5th wheel with our dually as if its not there! It was easy to assemble and fit perfectly into our new trucks puck system! We bought the size bigger than we needed, works great!
by: Steve K07/08/2020
These cameras have very good images.
Be aware when you place them as Awning Arms vs camera location can restrict your view. They work well in all light conditions and take the worry out of what is there behind & beside, especially on the Offside. Furrion’s Prodcut support is excellent should you need it. Install & pairing are relatively easy.
Adding these camera’s to the review/backup just completes the all round view.
Steve K.
7/10/2021
Would not be without them. Makes maneuvering easier and Mike eases directions from spotter.
by: David12/05/2021
Never got them to work like they should before we traded the RV. It had something to do with trucks running light voltage on my 2021 GMC Denali being too low. It could be fixed using a relay and powering them from the trailer batteries and using the truck lights to trigger the relay. But since we decided to trade the rig I didn’t bother adding the relays. They did work well when I tested them being powered directly off the trailer battery. The trucks cameras are so good if I had to do it again I probably wouldn’t buy them. BUT if you don’t have side cameras on your truck you will like them.
by: Chuck H.02/20/2020
Bought the side marker light cameras & rear view camera for a new 5th wheel that we took on a 2 1/2 month; 11,000 mile trip. One of the side cameras malfunctioned but was replaced at no cost to me. The rear view camera is very useful and works very well. The side cameras are less helpful. I have a better view of what is going on next to me by using the side mirrors. Also, the rear view camera is better at seeing what’s behind me and what is about to pass on either side, it also let’s me know when I can pull back into my lane when I’m passing someone. Although I can have all three cameras displayed on the monitor at the same time, the pictures are so small as to be useless when driving. Switching from from rear view to side view takes attention from driving and several seconds to accomplish. Additionally, the passenger (right) side camera’s view is partially obscured by the arm for one of the awnings on that side.
Having said all that, the side marker cameras work well, but are not as useful as I’d hoped they would be. Knowing what I now know, I probably would not purchase them again.
by: Dennis10/21/2019
Extremely happy with the product. Very easy to install and working great. Thank you for good service and speedy delivery.
by: BillC09/17/2020
These are great for providing a wide view of blind spots. This is useful for backing up as well. In my setup, I have to have the lights (or parking lights) turned on for them to work, but that is a minor issue.
by: Darrel03/30/2022
Cameras work great. They are every bit as good as the OEM equipment on our car. I drive with them on continuously to be aware of traffic around my 5th wheel.
by: Castaway12/11/2022
Easy to install, easy to use, works great! Great customer service by etrailer as well! Really well done!
by: Ronald03/12/2019
Excellent cameras. Has great wide angle view. Like the wireless feature. I give the cameras five stars. I just didn't care for the way they shipped the product. Yes you get free shipping, but they ship it UPS then transfer it to the post office which takes an extra two days to get. Should just have left it with UPS delivery only. That's why I gave only four stars.
by: Kenneth 07/23/2022
Easy install, works well on the road and helpful for a little extra blind spot view when backing in.
by: Robert03/15/2019
Very easy install on a 33’ Tralee trailer. But just an FYI, you’ll need to go out and buy your own screws. Otherwise great cameras and good picture. As far as reception I was able to get about 300’ away before I saw the slightest flicker. Definitely buy the 7” monitor for sure! Love doing business with etrailer! My goto for everything.
by: Fran 08/04/2022
Just installing them now. Very easy installation. Can't wait to see how they are working going
222
down the road.
by: Jim06/03/2022
Game changer, a little difficult to pair. Turn camera and screen off, try again(3 times=success)! Now they pair, everytime.
by: Fred 06/09/2021
Great customer followup Sharon kept me personally informed about the status of my order. I was on a tight schedule, I feel the order was expedited, and delivered a day earlier than promised. Thank you
Fred
6/10/2022
Failed again, the 3 pin contact between the housing and camera is not water proof. The contacts corrode and the unit fails. Takes about a year to fail.
Katrina B.
7/8/2022
I am sorry that this unit has failed you. I have gotten in contact with the manufacturer ad they have confirmed that the unit is indeed waterproof and the contacts should not be in the open to get water on them. The side cameras will need replaced. I have sent your information over to them for them to get into contact with you on a possible replacement.
by: David 02/20/2023
Easy install..
by: Anton 08/15/2021
would be nice to have the cameras adjustable but everything is working great
by: Jeff 11/23/2022
Great prices. Great service. Fast shipp ing.
by: Randy 08/11/2022
They do help. Akers driving a bit safe r.
by: JJ08/23/2019
They really work great and are easy to install.
25
50
Show More Reviews
See what our Experts say about this Furrion Accessories and Parts
- Could Cameras of Furrion Vision S Camera System be Active All the TimeThe cameras of the Furrion Vision S Systems # FOS05TASF are normally powered by the running light circuit of the trailer wiring. In order to have them on when parked and/or towing you'd have to have them ran to a power source that's on all the time like to a RV battery or to the 12 volt accessory circuit of the trailer wiring. You could put a switch on the battery circuit like you mentioned so that it's only active when you want it to be. It would be a matter of wiring a switch in line...
view full answer...
- Is It Possible to Turn Furrion Side Camera Observation System into Motion Sensor CameraYou'd have to source a 12 volt motion sensor trigger to wire to the power sources of the cameras in the Furrion side marker light kit part # FCE48TASL so that the cameras only have power when the motion sensor is triggered. While we don't carry motion sensor triggers they are pretty easily found online. You'd need one to basically act as a 12 volt relay. So the sensor would be wired to your RV battery directly through a switch like # D16740 and it would complete the power circuit to the...
view full answer... - Can a Furrion Wireless Backup Camera and Observation System Be Used with GM Infotainment System?I have a solution for you, but GM has made it so that only the IntelliHaul Echo Master cameras are wirelessly compatible with their Infotainment systems and we haven't come across any aftermarket wireless observation system for RVs that can be paired with these sytems. With that being said, there are some bonuses that come along with using a Furrion system like the # FCE48TASL-05 (5" monitor) which has the rear camera and monitor, as well as side marker light cameras. These side view...
view full answer... - Where To Install Furrion Side Marker Cameras On a 2016 Grand Design Reflection 30RLS 5TH Wheel?Typically the LED Marker Light RV Side Cameras # FCE48TASL that come in the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-05 are mounted on the lower side marker lights. On your 2016 Grand Design Reflection 30RLS these are going to be the marker lights just behind your front cap on the 5th wheel over hang. This provides the best view of the blind spots for vehicles. Each camera has a 65-degree viewing angle and the camera will be far enough away from the awning that...
view full answer... - Is It Possible To Hardwire The Furrion FOS05TASF There is not a hardwire option available for the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF. What you could do is cut the cigarette lighter end off of # C-FOS07TAPK-006 and run the leads directly to the battery using # 16-1-1 to extend the wires. The LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FCE48TASL you mention is sold separate.
view full answer... - Monitor Needed To Add In Side Marker Light Cameras To A Furrion Vision S Camera System The Furrion 4.3" monitor # FR77FR is only designed to work with one camera so you would need to swap out to the larger 5" # FR97FR or 7" # FR47FR monitors and could then install the side marker cameras # FCE48TASL. I've attached a short video below where I'll walk you through the installation process of the side marker cameras.
view full answer... - Is There a Spacer For the Furrion Vision S Side Cameras To Work On a Recessed Application? While we do not have a specific spacer for the Furrion Vision Side Cameras # FCE48TASL the 1/2" Spacer # TA25722-90F00 would be a good starting point. We also have it in a 1" Thickness # TA25723-90AD00 depending on how deep your recess is. These spacers already has a 1/2" hole through the center of it for running the wiring, and its polyethylene construction is not going to rust out over time. These will most likely need to be trimmed down to fit your opening. I find it best to use a fine...
view full answer... - Is There a Back-Up Camera for a Pre-Wired Montana High Country That Uses the Truck MonitorThere is only one system that will work on your 2017 Montana High Country with the factory pre-wiring, the Furrion Vision S Wireless RV Backup Camera System. This system is offered with a 4.3" monitor part # FOS43TASF or a 5" monitor part # FOS05TASF. These systems both use their own monitor, not the factory monitor. I am also not aware of a backup camera system for a trailer that works with the factory monitor on the truck let alone one that a trailer is pre-wired for from the factory...
view full answer... - Correct Furrion Monitor for a 2019 Grand Design Trailer with Pre-WiringThe factory pre-wired Furrion setup does not include the camera. It looks like there is a camera present at first glance but upon further inspection you will see there is only a mounting bracket installed, not a camera and mounting bracket. Therefore, you will need this as well as the monitor so basically the whole kit as that is how they are sold. The Furrion Vision S Wireless RV Backup Camera System is offered with a 4.3" monitor part # FOS43TASF or 5" monitor part # FOS05TASF. These...
view full answer... - Furrion Cameras Constantly Stay On Even When Unhooked With Grand Design Trailer Pre-wired For CameraThis seems to be a common issue with the Furrion cameras like part # FCE48TASL in the Grand Design trailers according to my research because of the way the pre-wired system was set up. Since your trailer was pre-wired for the camera then it is receiving power from the 12V power source on the trailer and not the running light circuit. Normally when the cameras are wired aftermarket the cameras are just wired to the running lights so they only work when the running lights are activated. If...
view full answer... - Troubleshooting Furrion Side Marker Cameras FCE48TASL That Wont Turn OnThe first thing we recommend doing is testing the Side Marker camera # FCE48TASL itself to make sure it is in good working order. You can do a bench test by connecting your ground, then connecting the camera directly to a 12v power source. If the camera powers on like it should, we can narrow down the source of the issue. Assuming the camera does work, it is likely not working because the running light circuit on your camper does not have enough power to run the cameras, along with the...
view full answer... - Can Larger Monitor Be Added to Furrion Camera System to Support LED Marker Light RV Side CamerasYes, the Replacement 7" Monitor for Furrion Vision S Wireless # FR47FR you purchased will allow you to use up to 4 cameras so you will be able to add your side marker cameras # FCE48TASL.
view full answer... - Can I Use the Furrion Side Marker Cameras with Factory Installed Furrion FOS05TASFThere isn't a pre-wiring solution for the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2 # FCE48TASL, but it's easy to install. You'll only need to remove your old light where you want to install this, make a single wire connection from one of your existing side marker lights for the installation and just bolt the lights back in place and you're ready to go. The cameras will pair to your existing monitor that you've got with the # FOS05TASF that came...
view full answer... - Can Furrion S7 Camera System Install on RV with Different Brand PrewiringIt is possible your camper has a different brand of camera prewiring, but the great thing about the Furrion RV Observation Camera System # FOS05TASF that you have is that it comes with the needed bracket to install if yours is different. So, you'd just need to use the included bracket after removing what's there and then wire the base to the wiring already there on the camper. At one point only Furrion was prewiring campers for cameras, but we are seeing other brands now like Voyager. I...
view full answer... - Best Backup/Observation Camera System for a 2017 Ford F-250 Super Duty and 5th Wheel TrailerI have the perfect option for you in the the Rear View Safety WiFi Hitch Backup Camera System part # RVS-83112-WIFI. The reason that the Rear View Safety WiFi Hitch Backup Camera System is the perfect option for you is because it can be used with either tablet, is battery powered so you can move it from the truck to the trailer, and it can be left on for use as an observation system. This is one of the only systems we have to my knowledge that meets all three of these requirements. The...
view full answer... - Backup Cameras Needed for 2020 Grand Design Travel Trailer and 2012 Chevy Express VanThanks for all of the info! We have exactly what you're looking for! To have more than 1 camera paired to a Furrion monitor you need the 5" Monitor Kit # FOS05TASF and an additional Vision S Camera # FCN48TASF (as both monitor kits come with an initial camera). Just install one camera on your 2020 Grand Design 3000QB and the other on your 2012 Chevy Express Van and then you can move the monitor to whichever vehicle you are operating (if you use a different vehicle to tow your Grand Design). Furrion...
view full answer... - Which Set of Clearance Lights on Camper Should Furrion Side Cameras ReplaceThe best location for the Furrion Side Cameras part # FCE48TASL that you referenced will probably be in the location of the front clearance lights since that gives you the most coverage of what's behind the trailer. But that said it's up to you where you want them so you don't necessarily need to follow that advice.
view full answer... - Installation and Operation of Furrion Vision S Side Marker CamerasFor the Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2 # FCE48TASL, you can absolutely view the sides and rear cameras at the same time. You will simply use the clearance/parking light circuit for your camera power and wire both the power and trigger wire to that same circuit. This is shown in the attached video. The 5 inch monitors offer the quad view or H view display to show this all at once where the 4.3 inch monitor requires toggling for view.
view full answer... - Is The Furrion RV Camera System With 5" Monitor Compatible With Side Marker CamerasYes, the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF can have the side marker cameras # FCE48TASL added on later. The 4.3" monitor system will not allow for the additional side marker cameras but both the 5" and 7" have the space for two side markers and an extra observation camera that most people either put above their entry door or on the front of their trailer to assist when hooking up.
view full answer... - Can A Truck Bed Camera Be Used With the Furrion RV Observation Camera SystemThe Furrion RV Observation Camera System part # FOS43TASF which is a fit for your 2019 Keystone Montana 3121RL can be paired with side cameras like the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for increased visibility of the trailer but they currently do not offer a camera for the vehicle. I assume your 2019 Keystone Montana 3121RL has a pre-mounted bracket specially for the Furrion RV Observation Camera System so I recommend you use this system for your trailer...
view full answer... - Will the LED Marker Light RV Side Cameras Work with a 2016 Ram 2500 MonitorIf you are asking if the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FCE48TASL (FCE48TASH) will work with the factory monitor in your 2016 Ram 2500, the answer is no. There is not a RV camera system currently available that works with the factory monitor on a vehicle. The LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FCE48TASL is designed to be used with the Furrion Vision S Wireless RV Backup Camera System w/ Night...
view full answer... - Camera Kit for 2020 Cougar that is Pre-Wired for Side CamerasYes, since your 2020 Cougar was pre wired for Furrion side cameras the kit part # FCE48TASL would fit easy and work well to have views on either side of the trailer. If you don't already have a Furrion monitor your best option would be the kit part # FCE48TASL-05 which includes a 5 inch monitor plus a rear view camera setup and you'd have everything you'd need.
view full answer... - Backup Camera Recommendation for 2019 Coleman LT 18 Travel TrailerYour 2019 Dutchmen Coleman Lantern LT Travel Trailer was pre-wired for a Furrion observation camera system like the part # FOS43TASF that you referenced. If you go with the 5 inch display version part # FOS05TASF you can have side cameras added with the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL so this would be what I recommend.
view full answer... - What is Angle of Camera View for Furrion Vision S Side Marker Camera Kit for RVThe angle of the Furrion side marker cameras in the kit part # FCE48TASL isn't adjustable. It's set at an angle that when you have it installed on the front of the trailer you'll see a small portion of the trailer and as wide of an angle to the side as possible to eliminate a blind spot. I attached a picture of what the view looks like you can see a small portion of the trailer still. Being able to see more of the trailer instead would only reduce the amount you could see out to the side.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Charles A
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Adam Y
Updated by:
Noah M
Edited by:
Amanda M
Test Fit:
David F
Test Fit:
Kevin C
Written by:
Halie H
Installed by:
Michael B
Installed by:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenneth
8/28/2023
One camera failed but Furrion quickly replaced under warranty. Furrion was easy to deal with. Honestly, I dont use the side cameras. My mirrors can be set to see both sides of my 5th wheel. So these are just a nice to have rather than a neccessary item. The rear view camera I count as a requirement.