Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the suction cup mount for your Furrion Vision S wireless RV backup camera system (FOS43TASF) with a 4.3" monitor.
Features:
Note: If you have a Vision S camera system with a 5" or 7" monitor, order part number FR79SR.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement suction cup mount for the Furrion Vision S wireless RV backup camera system. Now this part will replace the suction cup mount on your Furrion Vision S wireless RV backup camera system that has the 4.3 in size monitor. That's part number FOS43TASF, and that system we do sell separately on our website. Basically this mount will allow you to mount your monitor or your camera system anywhere you want. The monitor will just snap onto the ball of this mount and allows the monitor to rotate to any positions that need it. This part will include one suction cup mount, and then just show you how it mounts.
I have like a metal surface here, so you could just put your mount on here, and then if you just push down with your lever right here on the back as you push that down, it'll form a suction and you can see there's no way that's going to be moved anywhere.And then to remove it, just pull back up on that, and then pull up on the little tab here to remove the suction. But again, it can be put on anywhere you'd like. Push down on that, and it'll hold it into any position. And to remove it, just pull up on it, and pull that tab to release it. Very simple.
But that should do it for the review on the replacement suction cup mount for the Furrion Vision S wireless RV backup camera system.
Average Customer Rating: 4.4 out of 5 stars (205 Customer Reviews)
Replaces the suction cup mount for your Furrion Vision S wireless RV backup camera system (FOS43TASF) with a 4.3" monitor.Service and shipping from etrailer was excellent. Ordered item 4/2/2024 and received 4/5/2024. I called 4/5 with a question on how hard to push suction cup into mount hole on a 4.3 in Furrion camera monitor and received helpful tip from Danny. You have to push vey hard to seat the suction cup ball into the monitor hole. Once in it seems secure but there is limited directional movement. From the back of the suction cup to the ball is only 3” so for my application on a 2024 Chevy pickup the arm is rather short on a windshield attachment. Furrion uses a proprietary ball mount so you are prevented from using other aftermarket longer arm mounts.
After the suction for my campers backup camera had a melt down because of excessive heat on my windshield I went looking for a replacement. I went to every RV and Car place within 30 miles of home and could not find one with the size ball to fit my monitor. One place I visited looked up online and found what I needed in less than two minutes and suggested I order one online as it would be cheaper than him doing it for me. I did what he suggested and four days later I have the correct part in hand. Next time I’ll do that first as I probably spend more in fuel cost driving around than I did for the part.
Thank you…
The quality seems better that the original suction cup. I was planning on using the camera on a comping trip this weekend, but unfortunately, ball is much too small.
Katrina B.
5/2/2022
We do have a suction cup mount that is made for the 7 inch monitors, part # FR79SR. I have sent your information over to our customer service department for them to get into contact with you.
Finally obtained the correxct replacement part needed for my Furrion. Info provided by eTrailer about this item was key in deciding to order this replacement mount.
Great communication, fast shipping, and follow up. Highly recommend!
Thomas
11/15/2023
The product failed. The suction cup came loose just like the original one that came with the camera.
Your description is not very clear as to which one fits the 5 or 7 inch Furrion Vision S. As many of your reviews have stated mine also did not fit my 5” monitor. Now I have to pay $[XX] in shipping for the return when the product only cost $[XX] to begin with. I guess I’ll just be throwing it in the garbage!
Brooke M.
1/23/2023
This part is for the 4.3 inch monitor. If you have a 5 or 7 inch monitor, you will want part # FR79SR. I am sorry for the confusion and hope this clears it up for you.
This worked really well. The original one that came with the kit had broken after four years when the clear plastic suction base tore and separated from the black plastic base. The replacement appeared to be identical and has worked well for us for a year now.
etrailer was the only source I could find for this mount. Even the Furrion didn't have it in stock. Identification of the product and check out was simple and quick. Delivery time was within my time limits so all is good.
Perfect fit for my montitor
The plastic ball/part that pulls the suction cup from the windshield when the lever is pushed shattered after 10 uses between 2019 and 2023, rendering the mount useless. Partially because of the super strong grip (5 Stars) and the cramped design (3 Stars)
The product in itself is obviously well constructed and appears to be overall good. The reason for my low rating is not the product itself, it's the description that's the problem. The ball on this item is way too small for any of the Furrion Display Monitors despite being labeled as a "replacement" for the OEM mount. It's not.
This part should not have broken after a dozen or more uses the plastic in it is not bulk enough to hold the receiver
Doesn't fit what it says it should
Brooke M.
10/9/2023
Oh, no I am sorry to hear that! What were you hoping to use this with?
This appears to be good quality and shipping was fine. Unfortunately, it doesn't fit the 4.3" monitor that I bought at the same time. I expected, since I was ordering all three parts (4.3" Monitor, cord and mount) at the same time that this would have been verified before shipping as it should have been obvious that the mount was intended to go with the ordered monitor. I am reaching out for a replacement that will fit the monitor I ordered.
Jenny N.
9/29/2022
This suction cup mounted is a fit for the 4.3 inch monitor. I checked and I see that it looks like you received the wrong part and we have shipped a replacement to you.
Perfect replacement. And easy to install. Pull old unit out and push new one in.
I really like how you keep the customer informed all the way through. I do like the service hope you dont change it
I have the furrion vision S and this mount does not fit it. The end that pushes into the monitor is a lot smaller than the hole on my monitor.
Jenny N.
9/20/2022
This mount is meant to be used with the Furrion Vision S wireless RV backup camera system part # FOS43TASF with a 4.3 inch monitor. If you have a 5 inch monitor or a 7 inch monitor then you would want to use part # FR79SR instead.
Item doesn’t fit
Katrina D.
8/25/2023
If you have a Vision S camera system with a 5" or 7" monitor, you will need to order part # FR79SR.
The part was identical to the one that came with my camera. And they were very efficient and sending it out. Thank you for the great job.
Product was an accessory to my prior purchase and was an exact fit. Also, etrailer provided great tracking information.
This mount does Not fit this monitor. The ball is way too small
Katrina B.
5/2/2022
This item is designed to replace the suction cup mount for your Furrion Vision S wireless RV backup camera system [part # FOS43TASF] with a 4.3 inch monitor. Can you please confirm that you have the Vision S with a 4.3 inch monitor? I cannot see what size screen you have in the photo you provided.
Becky D.
5/2/2022
I ordered a 7 inch monitor.
Our original suction cup broke and this was a match.
The device fit, but doesn’t mount anywhere in the cab that is useful. I guess it’s okay, it just doesn’t fit anywhere.
Doug
8/18/2022
Flawless since I learned how to keep the screen image from reversing.
Incredible customer service!! Thank you!
Part arrived in the estimated timeframe and is an exact match to the original part. Great communication by the folks at etrailer.com.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
6/22/2021
Thank you for your review. I can see from your photo that you have a FOS07TASF Furrion monitor which is a 7 screen. You will need replacement suction cup part # FR79SR for that monitor.