Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers - Aluminum - 20,000 lbs
(215 reviews)
Price: $86.01
Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers - Aluminum - 20,000 lbs
Item # EZ-JACK
Retail:$98.62
Our Price: $86.01
You Save: 13%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (215)
- Q & A (0)
- Photos
Blaylock Industries Wheel Chocks - EZ-JACK
- RV
- Trailer
- Wheel Chock
- Single Chock
- Aluminum
- Blaylock Industries
- Silver
The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.
Features:
- Enables you to easily change a tire on your tandem-axle trailer
- Heavy-duty, crescent-shaped wedge with rocker design raises trailer off the ground
- Serves as a wheel chock to help keep your trailer in place on inclines and most surfaces
- Flip over and place narrow end in front of wheel
- Levels out your RV when it is parked on uneven terrain
- Drive up onto wedge to balance out your motor home
- Constructed of heavy-duty, corrosion-resistant cast aluminum
- Made in the USA
Specs:
- Weight capacity: 20,000 lbs
- Dimensions: 24" long x 6-1/8" wide x 6" tall
- Weight: 11 lbs
- Lifetime warranty
The Blaylock EZ trailer jack and wheel chock makes it easy to change or service a tire on your dual-axle trailer. Simply place the wedge in front of the tire that does not need to be changed. Pull the trailer forward (or backward) up onto the EZ Jack until the flat tire is up in the air.
Flip the wedge over (rocker-side down) to use it as a wheel chock on a flat surface or an incline. Simply turn the wedge upside down and place it in front of or behind a wheel.
Keep the wedge rocker-side up to level out your RV when it's parked on terrain that is not level. Set the unit in front of the tire, with the narrow lip under the tire, and drive your RV forward until the motor home is level.
EZ-100 EZ Jack by Blaylock Industries
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers - Aluminum - 20,000 lbs - EZ-JACK
Average Customer Rating: 4.7 out of 5 stars (215 Customer Reviews)
The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.by: Roger01/19/2019
The EZ-Jack works great. We have used it many times in the past year to level out the pick-up truck and camper, mainly for sleeping comfort. It is very quick and easy to place, and then drive the pick-up onto the jack. We have used it on a variety of substrates, from gravel, soft dirt, to cement. It remains solid in place, no scooting or movement. Smooth to drive off from too. Highly recommend it.
by: Paul07/26/2023
This may be good for trailers that don’t have wheel wells, but don’t use it on an auto trailer or anything else that has a wheel well. I got a flat while towing my auto trailer from FL to Utah. No problem, I have my new nifty EZ Jack. Rolled up on it and it tore the wheel well up. On top of that it didn’t raise the rear wheel enough to get it off. Luckily I pulled into a Home Depot parking lot to change it. Went into the store, bought a floor jack and got the tire changed. Have this to my brother who has a trailer that sits above the tires. Maybe he can get some use from it. I just have damage from it.
by: David04/06/2017
My trailer has a really wide axle spacing so I was a little worried that it would provide enough lift to get the wheel off the ground. The first time, it worked beautifully. The wheel to be changed had more than in inch of clearance to the ground.
Unfortunately, I forgot to install the center-cap with the new wheel so, I got to practice doing it again. This time two concerns arose. First, the EZ-JACK sunk in the ground just slightly mainly because I did not position it perfectly in line with the tire so, it tilted slightly causing it to sink in the ground a little which brings up the second concern that it can get sideways and this could be dangerous. Subsequently, I put a piece of plywood under it which served to stabilize it from the shifting ground not to mention that I made sure to square up the EZ-JACK to the tire.
Ordinarily, the EZ-JACK would be on asphalt or concrete but, still might be good to place a nice piece plywood down and be dang sure you align it with the tire.
Also, worth noting, this is a 10Klb trailer, so.
by: Kurt 01/27/2024
This is actually my 2nd one of these. Nothing happened to the other one, but I have multiple trucks and trailers and rather than moving stuff back and forth why not get another EZ JACK that makes changing a spare quick and ez
by: Brian F12/06/2019
I've used this to change a tire along the Dalton Hwy as well as to level my travel trailer side to side while boondocking and recomend this to anybody and everybody who has a tandem axle travel trailer. It will not fail like some reviewers of the plastic or composite product have reported. For me, it does not eliminate the need to carry boards as I don't like all the weight on one axle for more than a tire change. Also may need to put a board under it on soft or sandy ground. Would definitely buy it again.
by: Mark 11/22/2023
Great for changing tire on trailer. Just drive onto chock and second tire is completely off ground. Makes tire changes fast and easy.
by: Grady 11/26/2023
I haven’t had to use my Blaylock EZ Jack yet(thank God)but I have practiced with it. It sure seems like it will do exactly what I purchased it for when I actually need it. Great idea for a jack!!
by: Manfred08/28/2023
I have yet to use it, which is probably a good thing. But I have been on the side of the road with my boat changing blowouts with a tiny bottle jack and nothing else. Not the safest thing in my book. I can see how even on dirt, this would come in very handy and safe. I also volunteer my time at a local high school and they have an 10000lb trailer that we haul to local events and not too keen on using a single bottle jack for that either. Mostly purchased this for safety reasons. Not looking forward to the next blowout, but when it comes, I'll be ready.
by: Steve 03/14/2024
Works very well with my HD truck. Very sturdy and stable
by: Gary 04/27/2024
Great products and fast shipping. I appreciate companies like this. Not that many around!
Thanks!
by: Charles06/01/2023
I have a 25 ft flt bed goose neck that I use to carry hay on. Last year (2022) I had a blow out when the trailer was loaded. Fortunately, the service guy that changed my tire was able to jack up the trailer but it was touch and go. I bought a Trailer Aide Plus but with its plastic co truction and a trailer loaded to 15,000 pounds gross trailer weight, I eas concerned. The aluminum Blaylock EZ jack is a better choice for my purposes.
by: Uncle D07/06/2020
Saved my life on the side of the interstate [south of Montgomery, Alabama (I-65)] ! It was the first time I used it & I looked like a NASCAR pit crew I was moving so fast. Why won't people move over when they see a driver in distress ? Placed the EZ-JACK under the wheel (Gooseneck trailer) , backed up about six inches & That's all it took to make it where I could take the blowout off & put the spare on. I'd recommend doing a good look over when taking it out of the box & file any burrs of before storing it. I'm considering buying another one for the Toy hauler!
Uncle D.
7/6/2021
Fantastic, Saved my fanny on the side of a Interstate. Believe me, thats no place you want to be! I felt like a One Man NASCAR Pit Crew. FAST, SAFE, Back in the truck where I should be. Not playing dodge ball with Eighteen wheelers!!!
by: Kevin07/12/2015
Quality product! I have a dump trailer that I take to the landfill and I am always picking up nails / having flat tires. This jack will save me lots of time and it is much safer that the jacks that I have used in the past. I bought 3 of these, one for each trailer.
Kevin
7/14/2016
Really good, I had a flat on a major roadway with a tractor on my trailer. The jack helped me to be up and running with the spare tire installed in less than 10 minutes
by: Excellent11/03/2019
WELL MADE AND CRAFTED they work great for changing wheels or leveling my trailer on really unlevel camping spots. So far I haven’t had to use them, but they look like they will save my back a lot of Grief. I have a bad back, and needed something simple to do these jobs easily.
Louis S.
11/4/2020
I decided not to use to use these for Wheel chocks or levelers. I’m just gonna use it for changing tires. Beings after all aluminum, I am afraid someone will steal them. Beautifully made but a big chance they could walk away.
by: Ron02/20/2020
I've only had one opportunity to use the EZ-Jack and unfortunately, it didn't turn out very well. I had a tire go flat on my 20' tandem axle goose neck trailer while it was loaded with about 11,000 lbs of hay while it was parked in the hay barn. I first tried to use the EZ-Jack on the concrete floor but it would slide out from under the tire when I tried to back onto it. It is a very slippery with hay dust and chaff so I decided to try using it outside on the gravel driveway. This time I was able to get the EZ-Jack to stay in place but it wouldn't lift the front axle high enough to be able to remove the tire! The ground was somewhat soft due to recent warm and wet weather but it wasn't even close to being high enough to get the tire off. No time to be messing around in the cold weather so I resorted to using the tried and true bottle jack and have since added a low profile jack for those times when the axle on a flat tire is too low to the ground to get a standard height jack in place.
I haven't given up trying to make the EZ-Jack work, but just haven't had the time to mess around with it. If it doesn't work on the goose neck trailer, maybe it with work on one of my other trailers.
by: J.08/12/2020
Worked as advertised - needed to swap two tires on a tandem axle boat trailer and this got it done quick and easy. Unit is lightweight but feels durable and strong
J.
8/12/2021
Works great after a year probably used 5-6 times total, no cracking or other integrity issues
by: SK04/18/2023
Looks like it’s quality built and would work well on tires that are narrower than mine. But it’s only 155 mm wide and my tires are 235 mm. Unfortunately, I will be returning this as having 1-1/2” overhang (i.e. unsupported tire) on both sides is more than I am comfortable with.
by: Steve 11/09/2023
haven't needed to use it as of now so can't really say if it works
by: Donnie 12/30/2023
Just as described on line fast ship and Great Quality
by: Carol 12/15/2023
The next time we have flat on our camper it will be a great help.
by: Travis 06/30/2021
This is a great product! However, one downfall, not to any fault of the manufacturer, but it doesn't;t work f you have leveling jacks. It doesn't clear them and can't use it.
by: Frank10/16/2020
I first found a similar product made of plastic, this is aluminum.
I purchased this design for 2 reasons, first to provide greater leveling capabilities (I had the "lego" leveling plastic plates but they crack and fail also small pebbles get stuck in the mating spaces).
2nd, I like the idea of changing a wheel without using a jack.
When I have the opportunity to get out into the forest again I'll attach a picture of the product in use.
by: Byron 11/08/2023
Well made/designed! Very durable!
by: Robert 10/14/2022
Your service was fantastic
by: TJ10/05/2023
Great service and super fast shipping! Right in time for my trip! Great job!!
25
215
Show More Reviews
See what our Experts say about this Blaylock Industries Wheel Chocks
- Trailer Leveler Recommendation for up to 5 inches of LiftFor a trailer leveler that can go up to 5 inches you would want the Blaylock EZ Jack and Wheel Chock # EZ-JACK. I attached a review video for this product for you to check out as well.
view full answer... - Will The Blaylock EZ Jack And Wheel Chock Work With Tandem-Axle Boat TrailersYes, the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers, # EZ-JACK will work wonderfully for the boat trailer you describe.
view full answer... - Would the Blaylock Wheel Chock part # EZ-JACK Work with Trailer FendersThe Blaylock Wheel Chock part # EZ-JACK that you referernced should work just fine on a trailer with fenders like yours. I attached a picture that shows it being used on a trailer with fenders for you to check out plus a review video. The overall height of the product is 6 inches. As long as your fenders are taller than 6 inches off the ground there would be no way it would interfere with this.
view full answer...
- Is the Blaylock EZ Jack and Chock # EZ-JACK Sold as a Single or in PairsThe Blaylock EZ Jack and Chock # EZ-JACK is sold in quantities one 1. So it is a single unit and not a pair. I have included a link to a video review for you.
view full answer... - Trailer Jacks for Stabilizing and Lifting 5th Wheel TrailerWhen you need to remove a hub from your 5th wheel trailer to do wheel bearing inspection and re-packing you'll want to use a jack that lifts the trailer at the I-beam at the side of the frame. Scissor jack stabilizers like # UF48-979002 are not meant for lifting so much as for supporting a portion of the trailer's weight. You certainly CAN use a scissor jack to stabilize the trailer at camp. A safer way to remove your wheel and hub is the Andersen Rapid Jack # AM3620 or the Blaylock #...
view full answer... - Availability of Taller Level Jack than Andersen Wheel Chock # AM3604I wouldn't recommend stacking the levelers by doubling them up. We have the part # EZ-JACK which is much taller at 6 inches.
view full answer... - Wheel Chock Recommendation For Heavy-Duty Tandem Trailer The wheel chock I recommend for your tandem trailer is the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers, part # EZ-JACK. This measures 24 inches long x 6-1/8 inches wide and 6 inches tall. This wheel chock is constructed of aluminum and has a 20,000-lb weight capacity. This can be used as a wheel chock with the rocker side down or can be used as a jack to change one of the wheels on the trailer with the rocker side up. It can also be used a wedge to level the trailer on uneven...
view full answer... - Drive-On Wheel Chock for Tandem TrailersWhat you describe sounds like the Blaylock EZ Jack and Wheel Chock # EZ-JACK which works for tandem-axle trailers. This item works as both a device for changing tires as well as a wheel chock. Please refer to the linked video for more on this item.
view full answer... - Minimum Clearance Required for Blaylock EZ Jack and Wheel Chock # EZ-JACK to Fit Under TrailerSounds like you may be asking about what the minimum clearance would be for the Blaylock EZ Jack and Wheel Chock # EZ-JACK to fit under a frame or fender. The height of this at it's tallest point is 6 inches so that would be minimum clearance.
view full answer... - Does Blaylock EZ Jack Match Curve of Andersen Tuff ChockYou definitely want to put some sort of chock in the wheel that's still on the ground when raising a trailer. The Blaylock EZ Jack # EZ-JACK is not the same radius as the Andersen Tuff Chock # 3605. The Tuff Chock does match the Andersen Rapid Jack # AM3620.
view full answer... - Can the Lippert Ground Control 3.0 Be Used on a Cyclone Toy Hauler that Weighs 18kThe Lippert Ground Control 3.0 part # LC358590 that you referenced is designed for trailers that are up to 20,000 lbs so it would work just fine with your 18,000 lb trailer. Lippert does not recommend you use the Ground Control 3.0 for lifting a trailer up to change spares although we have read online where people have said they have done it without issue. It will void the warranty of the system and in most case you wouldn't get enough lift since these jacks are designed for leveling and...
view full answer... - Drive on Jack for Replacing Flat Tire on Tandem Axle Travel TrailerI'm not sure exactly which drive-on jack you currently have, but the Blaylock # EZ-JACK will provide 6 inches of lift, which should provide enough lift to allow you to change a flat tire. The jack is very easy to use, as you can see in the linked video. In the video, the jack is used to lift a fifth wheel that's larger than your travel trailer, so it should work great for you.
view full answer... - Recommended Jack for Changing Tire on 8,200 Pound Tandem Axle Trailer The Powerbuilt Unijack # ALL620470 referenced in your question has a weight capacity of 4,000 pounds. This is likely enough for your 8,200 pound trailer, but I recommend going up a bit with the Unijack # ALL620471 that is rated for 6,000 pounds. This will give you more of a safety margin for jacking up the trailer to change a tire. This bottle jack features a lift range of 11 to 21 inches and the safety bar locks the jack into place removing the need for jack stands. I have attached a...
view full answer...
- Will Andersen Rapid Jack # AM3620 Fully Lift Tires on 2016 Forest River Travel Trailer off GroundI spoke with my contact at Anderson and he estimates that the Rapid Jack, # AM3620, will work for about 98 percent of the trailers out there today. Take a look at the video that I have attached where you will see that by using the Rapid Jack on the front tire, the back tire is raised just far enough to change the tire. The remaining 2 percent of trailers have an independent suspension so raising one tire will not raise the other. You can easily test this by pulling up on a large/thick board. Although...
view full answer...
- Can Using Drive-Up Wheel Chock Cause Tire, Wheel or Spindle DamageIt is very unlikely that using a drive-on ramp or leveler such as the Blaylock EZ Jack and Wheel Chock # EZ-JACK would cause tire damage. If the tire was far wider than the leveler, or not lined up correctly, and was allowed to remain on the leveler for a very long time (weeks or months) it might cause flat spots, but that would tend to even out as you drive. Given the substantial 17.5K weight of the trailer, lifting much of its weight by only one spindle could cause the spindle to bend....
view full answer... - Can One EZ Jack and Wheel Chock be Used on a Tandem Axle TrailerIf you need to replace just one tire or do other work on one axle of a tandem axle trailer on just one side of the trailer then yes, you would need just one of the EZ Jacks, # EZ-JACK. But if you want both sides of the axle to be off the ground you would use 2. Take a look at the picture I have included. You can see using one at the front axle, the rear tire on the same side is off the ground. But if you look to the other side, the front tire is still on the ground meaning the back tire...
view full answer...
- What is the Maximum Lift of the Blaylock EZ Jack and Wheel Chock for Tandem-Axle TrailersWith the # EZ-JACK curved upward the height is 6 inches like you have said. But with the curve down you can get a little more height. I went out to the warehouse to measure it and came up with an overall height of 7-3/8 inches at the highest point with the # EZ-JACK curve facing down. This aluminum jack would be an excellent replacement for wooden ramps. It will last much longer and it is corrosion resistant. I would not say they nest particularly well. We store them kind of like spoons...
view full answer... - Tire Change Jack For An 11,000 lb Toy HaulerThere are a couple options that may interest you. One very popular option is the Blaylock EZ Jack # EZ-JACK. This is a wedge-style jack. Basically what you would do for a triple axle trailer is turn the curve up, opposite the wheel, and then drive the trailer up on to the jack which will allow you to change a tire. The main things I like about this option is that it is compact and lightweight, it also does not require any "elbow grease" like a manual crank jack. It also can be used as a...
view full answer... - Can Blaylock EZ Jack and Wheel Chock # EZ-JACK Be Used to Change Tire on Tandem-Axle TrailerThe Blaylock EZ Jack and Wheel Chock # EZ-JACK referenced in your question will work perfectly as a jack to change tires on your tandem axle leaf spring boat trailer. All you need to do is roll the good tire up onto the wedge and the flat tire will come up off the ground high enough to be changed. It has a weight capacity of 20,000 pounds. I have attached a short video demonstration that you can also check out.
view full answer...
- Can Blaylock EZ Jack and Wheel Chock be Used with Torsion AxlesYes, the Blaylock EZ Jack and Wheel Chock part # EZ-JACK that you referenced will work with torsion axle trailers like what you have on your trailer. It works just as well with torsion axles as it does with leaf spring axles. I attached a review video for this product for you to check out as well.
view full answer... - Do You Carry The Balyock EZ-100 Jack? The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers # EZ-JACK is the EZ-100 EZ jack from Baylock. We use our own part numbers that are different from the manufacturers part numbers. It can support up to 20,000lbs and provides up to 6" of lift.
view full answer... - Trailer Jack Ramp Recommendation for Tandem Axle Trailer to Change SpareI believe you are looking for the Blaylock EZ Jack part # EZ-JACK. This is a ramp that you can roll up on that will allow you to change a tandem axle trailer spare.
view full answer... - Wheel Change Jack Compatible with Triple Axle TrailerThe Andersen Rapid Jack # AM3620 is not designed to work with triple axle trailers. If you are looking to use it for leveling, then I recommend the Andersen Camper Wheel Chock and Leveler # AM3604 for your application. The similar # EZ-JACK is also not for use on triple axle trailers. If you are looking to use for changing a tire there unfortunately isn't a drive on solution we can offer. You will need the Powerbuilt Unijack Bottle Jack with Built-In Jack Stand - 21" Lift - 6,000 lbs...
view full answer... - Which Ramp Style Trailer Jack Can Work on Triple Axle TrailerI have a solution for you, but the # EZ-JACK won't work well on a triple axle trailer. It would be too difficult to get the jack between the tires of a triple axle trailer and the height wouldn't be enough. Take a look at the Ultra-Fab Leveling Blocks, # UF48-979051. These 10 levelers can be stacked as needed and the space between tires of multiple axle trailers should not be an issue. With a triple axle trailer though a 10-pack may not be enough so you may need 2 of the 10 packs. Each...
view full answer...
Do you have a question about this Wheel Chock?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Installed by:
Andrew K
Installed by:
Matthew K
Installed by:
Cole B
Installed by:
Randy B
Written by:
David L
Video Edited:
Jacob T
Video by:
Patrick B
Video by:
Aidan B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roadrunner
1/31/2020
GREAT!!