bing tracking image
  1. Truck Bed Extender
  2. Erickson
  3. Hitch Load Extender
  4. Adjustable Height
  5. Steel
  6. 51 Inch Wide
Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs

Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs

Item # EM07605
Retail:$171.54
Our Price: $112.02
You Save: $59.52
Truck Bed Extender
Shipping Weight: 31 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab. Great Prices for the best truck bed extender from Erickson. Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs part number EM07605 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Photos

Erickson Truck Bed Extender - EM07605

  • Hitch Load Extender
  • Adjustable Height
  • Erickson
  • Steel
  • 51 Inch Wide
  • Black

The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab.


Features:

  • Load extender makes it safe and easy to carry long cargo like lumber, canoes, and ladders with your truck, SUV, or UTV
  • Bed extender configuration lets you carry extra-long loads that extend past your truck bed
    • Extends 4' from your vehicle's hitch
  • High-mount load bar configuration lets you haul cargo above your bed and level with your roof
    • Frees up space in your bed for other cargo
  • Adjustable height allows you to level the support bar with your bed or the roof of your cab
  • 2 Integrated tie-down points make it simple to secure cargo
  • Black powder coated steel is durable and rust resistant
  • Easy installation
    • Slides into your trailer hitch receiver
    • Requires hitch pin and clip or hitch lock (sold separately)


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Weight capacity: 350 lbs
  • When used as bed extender:
    • Extension from hitch receiver: 4'
    • Height adjustment (in 1-3/4" increments): 17" to 24"
  • When used as high-mount load bar:
    • Extension from hitch receiver: 11"
    • Height adjustment: (in 1-3/4" increments): 55-1/4" to 62"
  • Width of load bar: 51"
  • Weight: 25.5 lbs
  • 90-Day limited warranty


Securely transport your long cargo with the sturdy steel Big Bed Junior load extender. It lets you safely and easily carry lumber, canoes, ladders, construction materials, and other loads that extend past the bed of your truck, SUV, or UTV.


The installation of the Big Bed Junior is quick and easy. Just slide the load extender into your 2" x 2" trailer hitch receiver. A hitch pin and clip or a hitch lock (sold separately) is required to secure the Big Bed Junior in your hitch.


Erickson Big Bed Jr as Load Extender

To use the Big Bed Junior as a bed extender, simply connect the support bar to the short end of the extension bar. The Big Bed Junior extends 4' from your trailer hitch receiver, giving you plenty of space to carry your lengthy cargo. The height of the mast can be adjusted to level the support bar with the bed of your truck. Two integrated tie-down points make it simple to secure your load.


Erickson Big Bed Jr as High Load Mount

You also have the option of converting the Big Bed Junior load extender into a high-mount load bar. Simply connect the support bar to the long end of the extension bar so that the support bar is level with the roof of your cab. This makes it easy to transport canoes, ladders, drywall, and other long items above your truck bed, and it frees up space in your truck bed for hauling other cargo.



07605 Big Bed Jr Load Extender by Erickson Manufacturing





Customer Satisfaction Score:


Customer Reviews

Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs - EM07605

Average Customer Rating:  4.6 out of 5 stars   (170 Customer Reviews)

The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab.

by:

I use the bed extender several times a week, and this thing is stout! I got it to help load and unload my Solo Skiff. I am able to stand on the lower hitch part and rest the Solo on it. I also use it as a step into the hed of my truck, 3500 GMC. I love this product.

Matthew K.

12/19/2017

Bed extender working great after a solid year of hard use. Minus a little rust from salt water exposure, it is flawless. Excellent purchase.



by:

Product worked as advertised and as expected. See photos - the only way to haul 16' lumber in the 5 1/2 foot bed of an F150. My only complaint was the limited height adjustment. I have a Decked drawer storage system in the back of my truck so the cross bar was too low on its highest setting. As shown in the photos, I had to add an 8 inch riser to get up to the level of the bed. But it was easy and worked well with this new part. Be careful on steep driveways so that the hitch extension does not scrape. Good product - worth the cost.

Etrailer Expert

Heather A.

6/28/2021

Thank you for your review. If you need a bed extender that allows for more height adjustability, I recommend the Yakima LongArm Truck Bed Load Extender part # Y01149 which can be adjusted to 46 inches in height.



by:

Best one in its class and price range. Worked great for canoe and kayak transport. Does wiggle a little bit, but hey, what do you want. I would suggest that if you are transporting something with a decent finish, like other than a cheap canoe or kayak that you consider using a lengthwise cut hollow pool noodle or pipe insulation wrapped around, and secured with duct tape, the T to protect from rubbing and scraping during transport or load/unload. If your transporting lumber or ladders, who cares. But the padding will prevent any sliding as well. When the load is secured with tie downs, the rattling is negligible and very secure. Well thought out product and I would recommend this one as reliable and very price competitive. Oh, and the black powder coat paint makes it look cool too.

Fastjohnny

8/18/2023

Works fine. Ive gotten it stuck on trees and buried the end in a dirt embankment and no bending or twisting. Price is right and would I buy it again, of course. Would I recommend it to someone, absolutely...the only problem is that my friends are such cheapos that they would rather dent their cars and trucks with loading stuff, than to spend such a small price for the item...go figure.



by:

Amazing product. We can carry 3+ kayaks on the bed of our jeep truck. Def worth the money



by:

Shipped sooner than expected. Sturdy rack made to last. I added a tail/stop light for additional safety. Got the light and trailer plug here also.

Kenneth

9/6/2019

I use it as a rooftop extender on my SUV. Works very well when I need to haul a few long boards or sheets of plywood. Saves on having to use my trailer for small loads.



by:

HAVE NOT USED IT YET. BUT I THINK IT WILL WORK VERY WELL FOR HAULING LUMBER AND OTHER THINGS AND I THINK IT WILL WORK WELL FOR TRANSPORTING CANOES.

Terrell

11/27/2023

It has worked very well for transporting kayaks during the paddling season and leaving bed free for camping gear. I like that it is so versatile in the adjusts you can make to accommodate your haul needs. Great rack!



by:

The extender was long enough but loose in the 2x2 hitch reciever. It should be a little wider for a tighter fit. Definitely need a hitch sway bar bracket. The T-bar was also loose (same reason) when fit over the extender. I opted to use a 3" bolt rather than the hitch pin (not shown in this picture), to keep it from swaying, although not in a dangerous way. Also highly suggest adding the pool noodles for visibility, less slippage for items, and also to keep potential damage to tailgate if accidentally lowered. The 14" extender previously mentioned added to this should allow for almoat all tailgates to open. Vehicle is a 2019 Ram 1500 Limited (New style)



by:

Ordered the Big Bed Junior Load Extender to haul my 12-foot kayak easily in the bed of my small pickup instead of having to deal with roof rack saddles on car (plus just the effort of lifting and loading). Installation was very simple and straightforward, and as the picture shows, it definitely gets the job done. Four stars vs. five b/c I am surprised at how much slop there is in both how the parallel-to-ground L-shaped bar fits in the hitch and how the crossbar fits on top. May do some duct-tape wrapping to reduce the amount of play in these fittings. That said, have driven locally on a bumpy gravel road and over RR crossing with no issues; have not yet tested hauling boat at highway speed. Five starts plus for etrailer customer service and shipping on my order, btw!



by:

Purchased Big Bed Junior Tailgate Extender for my 2000 Escalade. Planning on hauling 12' lumber this summer to build a storage barn for my son. Support T ends up right at 11' from the back of the folded down vehicle seats, so it's perfect for 12' lumber. Would be nice if you had a split support piece that could be bolted on anywhere between the vehicle and the end of the 4' extension, so that another T upright could be attached. That way you could support shorter materials such as 10' pipe, trim, or lumber. Now it appears that I'll have to start with a 12' piece and then strap the shorter materials to it. Overall a very nice unit and reasonably priced. Am happy with the purchase.

John O.

3/17/2018

Great product. Worked as described.



by:

Love being able to take our big kayaks with us. How ever we got a blue ox tow bar from you. You didn’t catch that it was the wrong one for my maverick Blew out 2 bars in 9 months. Blue ox didn’t catch it till second one broke. On the right track now



by:

Just came today. Tried it out on my Jeep Gladiator and fits nicely. Extends my load area to 9 feet. Will be very handy for carrying long pieces of wood. Should be able to carry my 2 16' kayaks.

Bill

2/23/2023

I have a Jeep Gladiator. It has a small bed and the extender is great for carrying items that stick out well beyond the bed. Ive used it to carry lumber and drywall up to 16 feet long. I also have a pair of 17 foot kayaks that I intend to use it with. Its a whole lot easier to load 65 pound kayaks in the bed with the extension rather than get more equipment to make overhead racks.



by:

Just what we needed to transport our kayaks! The pic shows how perfectly they fit! Super easy to connect to hitch. Great product at a great price. Thanks for the fast shipping too!



by:

Works great!



by:

I've used this several times now and have no complaints. It's very sturdy and well made, and the simple design makes it very east to disassemble and store in the back seat of my truck. I works very well for its intended use, and unlike some others reviews I have no issues with it seeming "loose" or rattling, nor have I noticed this while I drive. If it were any more tight-fitting it would be more difficult to put together and take apart, and that would be a serious flaw. I'm very happy with this product. It makes loading, transporting, and unloading my kayak a breeze.



by:

I like the product, but feel that the tube steel doesn't insert far enough in the hitch opening when the holes line up. I'm tempted to drill new holes to be able to set in more. It would be stronger that way.



by:

The unit was made in China. The welds are poor and the long part of the two was misaligned when welded, not at 90 degrees. The misalignment causes the cross bar to sit at an 10 to 15 degree angle from normal in the horizontal or vertical mounting position. I weigh around 225 pounds and stood on the unit at the longest point, it creaked a little but it held my weight. Although it is rated for 350 pounds, I would be cautious if it is loaded to the max. It is easy to install, and stores in a minimum amount of space. I will use it to support 2 kayaks while most of the weight of the kayaks will be in the bed of the truck. It should have a light kit available for purchase.

Doc

9/2/2016

Products are still doing great.



by:

Works very well transporting 2 pungo kayaks, easy to assemble, extremely durable, great price on etrailer. Shipping fast, arrived 1 day early. Would be 5stars but kit only comes with 1 hitch pin. Doesn't say anywhere on website, FAQs, or specs that only 1 is included. If I had known 2 weren't included I woulda have ordered at same time.

Michelle

6/28/2021

AWESOME!!! After a year, We love it, totally recommend this to everyone.



by:

This product arrived on schedule and in prefect condition. The construction looks to be high quality, and the price was very competitive. I have attached it to my pickup truck receiver hitch, and everything fits. I haven't tried yet to carry the canoe, so I can't speak yet about how it works under load and driving conditions. Once I have a chance to use it I will try to get back into this review and add something about how it works. From what I have seen so far, I think it will do exactly what I hoped it would.

Craig G.

6/15/2018

Since first posting a review, I have used the cargoe carrier to carry my canoe to an area lake, including driving on the highway. It worked very well. No problems. I would recommend this product without reservation.



by:

I bought this product to carry a canoe in the over-head position on my Tacoma. The fit in the receiver was good and the wobble was minimal. The welds all look good, everything is straight and the 90's are true. I especially liked the added brace at the 90 degree joint on the main piece. The long tube on the main piece is double-walled for added strength. This extender is equal to or better than anything I've found online.

Ken R.

4/23/2018

I like the truck rack and it works well. I wish there was an option to add a bike rack to the base frame. Then Id have the best of both worlds: a canoe carrier and a 2 bike rack with the same hardware. Seems that someone with your expertise could invent that combination.



by:

Main use is for my tandem kayak with a short bed truck

Todd

5/10/2023

yes



by:

This was the perfect balance of utility and storability. I didn't want a full time rack on my truck. This extender allows me to carry my ladders and kayaks while not having drive with a rack on the truck all of the time. The shipping from etrailer.com is stupid fast. I really love the reviews and product information that is available on the website.



by:

Box destroyed during shipping. Pin location needs to be set back farther to allow more of it to go into the receiver. One poor weld on the T bar. Design nice, reflector nice. Should come with at least one pin for the top T bar.

Tw

5/5/2018

Holding up no issues



by:

Great product. Already using it to haul my kayaks around. Just wish the length was adjustable like the height is. But I'm happy with it. Got it in 4 days from ordering so that was a surprise. Thought it be two weeks

Matt B.

7/30/2021

Very useful! Used it to haul my rowboat and kayaks with no issues. Even added some lights to it for better visibility to the vehicles behind me. Just plugged them into the trailer hitch lights.



by:

I found the Bed Extender to be substantially built. I used it to haul 2 kayaks before I decided on a cap. It did the job, with one nagging issue. The straight extender was reasonably tight in the receiver and presented no problem. when I put the vertical T on the extender I found there was a substantial amount of play in the fit, and it allows the t bar to wobble terribly. I had to run ratchet straps to the truck tie downs in order to keep it from swaying side to side. Ok from short distance to get lumber etc., but not good for long distance 300-500 miles with 2 kayaks on the extender.



by:

The Erickson Big Red Junior Load Extender was delivered promptly. Just loved it! Used it yesterday to carry two kayaks. Fit perfectly. Heavy duty built, easy to install. Has many uses. A lifetime product. Thank You!

Joyce J.

6/22/2017

After a year the product is Great! No complaints!


25
170
Show More Reviews

See what our Experts say about this Erickson Truck Bed Extender

  • Load Extender Options For Carrying Kayaks
    Of your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender # Y01149. If you're not concerned with the looks go with the Malone Axis # MPG907. It has more ground clearance in it's lowest setting but it's width is only adjustable from 24 inches to 48 inches so it may not be wide enough for your application. The Erickson # EM07605 has a 51 inch width so be sure to measure your kayaks width to see which...
    view full answer...
  • Availability of Hitch Cargo Carrier-Mounted Kayak Carrier for 4 Kayaks
    We do offer hitch-mounted cargo baskets and enclosed carriers. We also have hitch-mount load supports that can be used to transport a kayak or canoe in conjunction with a roof rack. Such an item is the Erickson Big Bed Junior Load Extender # EM07605. For reference I have linked you to our main page for hitch cargo carriers. You can use the filters in the left-hand margin to narrow the results based on your hitch size. I do not know of any kayak rack intended to mount to a cargo carrier,...
    view full answer...
  • Height Ranges of the Erickson Extend a Truck
    Depending on the orientation of the Erickson part # EM07605 it can install with two height ranges. From the top of the hitch opening up the upright can install in a range of 17" and 24" when used in the lower position or from 55-1/4" and 62" when in the taller setup. You would need to measure from the top of the hitch opening to the top of your tool box to see if it falls in the range of either.
    view full answer...
  • Recommended Roof Rack and Hitch Mounted Load Extender for 12 Foot Extension Ladder on Ford F-150
    Yes, the Rhino Rack roof rack system will be able to handle the weight of your extension ladder. For your F-150 Crew cab, the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2, the 2500 Series Legs # RRRLKVA, and Custom DK Fit Kit # DK427 will support up to 165 lbs. This rack will fit F-150 Crew Cab models from 2015 to present. If you have a different model year, let me know and I'll help you get the correct fit. The issue you will have is with the leverage of the ladder because it is...
    view full answer...
  • Hitch Position and Compatibility with Erickson Load Extender for a Front Hitch on 2012 Dodge Durango
    On the review picture you mentioned to me it looks as though he scuffed up the receiver face a little. This means he probably used the hitch, # C31033, several times before sending us pictures. So it should be flush or nearly flush once installed on you r2012 Dodge Durango Citadel. I have linked the installation instructions for you. The hitch is compatible with the Erickson Big Bed Junior Load Extender # EM07605 which will fit a 2 inch trailer hitch and extend out enough to clear the...
    view full answer...
  • Ladder Rack and Tonneau Cover Recommendation for 2014 Toyota Tacoma Regular Cab
    The TracRac Ladder Rack system you referenced, part # TH27000XT-EX, is one of three confirmed fits for a ladder rack for your 2014 Toyota Tacoma. This fixed-mount ladder rack mounts to the underside of your Tacoma's bed rails with clamp-on hardware, no drilling required. A video is linked to illustrate. All ladder racks for your truck can be seen on the link provided. Typically tonneau covers and ladder racks will use the same points on the truck's bed rails for installation. The various...
    view full answer...
  • Does the Erickson Hitch Mounted Load Extender, # EM07605 Come With Straps
    The Erickson Big Bed Junior Hitch Mounted Load Extender, # EM07605, does not comes with the straps you see in the pictures. If you look at some of the pictures of just the extender, you will see two loops, one on each end, of the T part of the extender. You could run safety cables, rope, or hooks through these to help secure the cargo. The other straps are attached in the adjustments holes for the cross bar. You could also wrap a strap around each side of the cross bar to stabilize the...
    view full answer...
  • Recommended Load Extender to Match Roof Line on Wagon
    The Yakima LongArm Truck Bed Load Extender part # Y01149 is our best out of the box option for matching the roof line on a wagon as it can be adjusted to one of the following heights. Low Bar Heights - 40 in, 37 in, 27 1/2 in, 14 1/4 in Mid Bar Heights- 41 3/8 in, 38 1/4 in, 28 in, 15 1/4 in High Bar Heights- 42 3/4 in, 39 1/2 in, 29 in, 15 3/4 in If this won't work for you, your only other option would be to go with something like the Erickson Big Bed Junior Load Extender for Truck...
    view full answer...
  • Using Hitch Extender with Erickson Big Bed Junior Load Extender to Clear Spare Tire on Jeep
    If 6 inches would be enough extension, you could go with the Brophy 6 inch hitch extender, part # HES6. Unless you Jeep has huge swamper tires on it, 6 inches of extension should be plenty. However, keep in mind that using the extender will lower your hitch tongue weight capacity by half. If your hitch has a 350 tongue weight capacity, using the extender would lower that to 175. If you're using the Erickson extender to carry something like a ladder or a canoe, half the weight of the load...
    view full answer...
  • Recommended Kayak Carrier for Tandem Kayak Weighing 90 lbs and 21 Feet Long
    The Yakima SweetRoll Kayak Carrier w/ Tie-Downs - Saddle Style - Rear Loading # Y04074 has a load capacity of 80 lbs. For easy loading and support I recommend using the Erickson Big Bed Junior Load Extender for Truck Bed or Roof # EM07605 along with a foam block like the Malone # MPG172 and # e98880 hitch lock to help with the weight capacity as well as the extended length.
    view full answer...
  • Dimensions of the Erickson Big Bed Junior Hitch Mounted Load Extender -
    The Erickson Big Bed Junior Load Extender for Truck Bed or Roof # EM07605, has a load limit of 350 pounds. The overall width of the cross bar is 51 inches. There are numerous other measurements on our product page (see link) to help you figure out if this is the right item for your needs. I have also attached a review video to give you more information.
    view full answer...
  • Can the Erickson Big Bed Junior Load Extender # EM07605 Be Used Tall Like a Ladder Rack
    Yes, the Erickson Big Bed Junior Load Extender # EM07605 can be used either way. It can be used low for like a bed extender or high similar to a ladder rack. I attached pictures of both setup for you to check out plus a review video.
    view full answer...
    Image 1 for Image 2 for
  • Carrying Canoe Level on 2016 Chevy Silverado with Leer 180 Camper Shell with Rear Incline
    It would actually be better to have the canoe either all on the camper shell or all on the cab of the truck. When a load is split between the 2 it could result in problems because the truck bed can move some independently from the cab. The artificial rain gutters can be installed anywhere that you are willing to drill into. I do not recommend it on a 2016 Chevy Silverado because who wants to drill holes in the cab of a new truck! What you could do is use one Darby Turbo-Rack # DTA968...
    view full answer...
  • Carrying Kayaks With 2018 Jeep Wrangler JL 2 door Soft Top
    I can help you find a kayak carrier with load assist for your 2018 Jeep JL Wrangler. The Erickson Big Bed Junior part # EM07605 comes as a quantity of 1 but 2 can be purchased, one for a front hitch receiver and one for a rear hitch receiver like the photo you mentioned. The first extender would pin into a front mount receiver on the front of the Jeep and the second extender would pin into the rear hitch receiver. You could then put your kayak on top of the extenders and tie it down with...
    view full answer...
    Image 1 for
  • Recommended Suspension Enhancements For A 2013 Thor Challenger 37KT Class A Motorhome
    Having worked in our installation department I can say that the most preferred suspension enhancement for a Class A motorhome is definitely SumoSprings. They provide a much softer progression to give you support without sacrificing ride quality. The best part of these springs is that they are completely maintenance free so you won't have to do anything else once they're installed. For the front of your 2013 Thor Challenger 38KT I recommend the SumoSprings Rebel Custom Helper Springs #...
    view full answer...
  • Recommended Adapter To Use In 2-Inch Trailer Hitch As Tent Tie-Down Anchor
    The extension I recommend for you is the Erickson Big Bed Junior Load Extender for Truck Bed or Roof # EM07605. This extender is normally used for cargo that is too long for a truck bed but you could tie your tent to the arms on the end of this unit. It extends 50 inches and has a 350-lb weight capacity. It also has a 17 to 24 inch vertical adjustment and will work with your 2-inch trailer hitch receiver. The extended bar you asked about, part # X12-BAR is designed for 1-1/4 inch receivers...
    view full answer...
  • Roof Rack and Carrier to Transport 110-lb Canoe on 2014 Ford F-150 Super Crew Cab
    If you have a slide-in truck bed camper on your 2013 Ford F-150 you'll need to use a combination of rooftop canoe carrier and front-mounted hitch and load support to hold your 110-lb 15-foot canoe. The good news is that you do not have to install a roof rack on the truck cab, just a handy, low-cost and lightweight foam block canoe carrier like # MPG156 from Malone. The foam carrier will support one end of the canoe while the front-mounted hitch and load support will support the other...
    view full answer...
  • Width of Erickson Big Bed Junior Load Extender
    The Erickson Big Bed Junior Load Extender # EM07605 has a load bar which is 51 inches so your cargo would need to be under that width in order to fit. It fits in 2 inch hitch receivers, has a weight capacity of 350 lbs and will require a hitch pin and clip such as # PC3, though I recommend using an anti-rattle lock such as # 63232. I've added links to video reviews of this product for you to take a look at.
    view full answer...
  • Extension and Height Dimensions for Erickson Big Bed Junior Load Extender
    When used as a bed extender, the Erickson Big Bed Junior Load Extender # EM07605 referenced in your question can adjust up to 24 inches in height and extend out 4 feet from the hitch receiver. When the extender is used as a high-mount load bar, it will extend out 11 inches from the receiver and can be adjusted in height from 55-1/4 inches to 62 inches. This carrier will let you safely and easily carry loads that extend past the bed of your truck. It has a weight capacity of 350 pounds....
    view full answer...
  • What Are Erickson Big Bed Load Extender Extension Lengths And Height Adjustment Options
    The Erickson Big Bed Junior Load Extender, Item # EM07605, extends 4 feet from hitch when used as bed extender and 11 inches when used as high mount load bar. It has five height adjustments that are in 1-3/4 inch increments and can be extended from 55-1/4 inches to 62 inches. The Load bar is also 51 inches. I had attached a video for you to check out.
    view full answer...
  • Does the Erickson Big Bed Junior Load Extender # EM07605 Come with a Pin and Clip for Trailer Hitch
    The Erickson Big Bed Junior Load Extender # EM07605 does come with a pin and clip to secure the height adjustment of the "T" but not a pin and clip for securing the shank in a 2" trailer hitch receiver. You can acquire a pin and clip with the part number # PC3 on our site, or you can use a locking hitch pin that also works as a stabilizer which is part # 63232.
    view full answer...
  • Width Of Load Bar And Capacity Of Erickson Big Red Junior Load Extender
    The Erickson Big Bed Junior Load Extender, Item # EM07605, has a load bar that is 51 inches. It fits 2 inch receivers and has a total weight capacity of 350-lbs. It has five height adjustment points which gives you more flexibility. It can move and rattle so I recommend an anti-rattle device like Item # 63232 to keep it more secure. I have added a video with more details for you to check out.
    view full answer...
  • How To Keep Erickson Big Bed Junior Load Extender Stable And Reduce Wobble
    If the Erickson Big Bed Junior Load Extender, Item # EM07605, is wobbling and rattling then use an anti-rattle hitch lock like Item # 63232. If the wobble and rattle is coming from the T-section put a lock there. You can use more than one lock which will help. Additional information and videos are attached for you to check out.
    view full answer...
  • Length That Erickson Big Bed Junior Load Extender Goes Past Receiver
    The Erickson Big Bed Junior Load Extender # EM07605 extends 4 feet from the hitch receiver when used as a bed extender and 11 inches when used as a high-mount load bar. You will need anti-rattle hitch lock # 63232 to keep it secure in your receiver. I've added links to video reviews of this product for you to take a look at.
    view full answer...


< Previous
123. . .4



Do you have a question about this Truck Bed Extender?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Aidan B
Video by:
Aidan B
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Hayden R
Test Fit:
Hayden R
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mary K
Written by:
Mary K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.