Length That Erickson Big Bed Junior Load Extender Goes Past Receiver

Question

Question:

how far does it extend

asked by: Delray L

0

Expert Reply:

The Erickson Big Bed Junior Load Extender # EM07605 extends 4 feet from the hitch receiver when used as a bed extender and 11 inches when used as a high-mount load bar. You will need anti-rattle hitch lock # 63232 to keep it secure in your receiver.

I've added links to video reviews of this product for you to take a look at.

expert reply by: Kyle S

0

Answer 1

The Erickson Big Bed Junior Load Extender #EM07605 that you referenced does not fold up for storage. The load bar can be removed from the hitch extension, but the extension does not fold up or come apart to store smaller. While the extender offers a…

view full answer...

Answer 2

If the Erickson Big Bed Junior Load Extender, Item #EM07605, is wobbling and rattling then use an anti-rattle hitch lock like Item #63232. If the wobble and rattle is coming from the T-section put a lock there. You can use more than one lock which…

view full answer...

Answer 3

The Erickson Big Bed Junior Load Extender for Truck Bed or Roof #EM07605, has a load limit of 350 pounds. The overall width of the cross bar is 51 inches. There are numerous other measurements on our product page (see link) to help you figure out if…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Length That Erickson Big Bed Junior Load Extender Goes Past Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching