Derale High-Temperature Replacement Hose for Engine Applications - 10' Long

See what our Experts say about this Derale Accessories and Parts

• What Pressure are the Derale Transmission Coolers, Fittings and Hoses Rated For
  All of the Derale transmission coolers, fittings and hoses that we carry are tested for use up to 300 psi. Along with this cooler you might need the following parts for installation as an engine oil cooler: 10 AN Hose Fittings, # D98203 Remote Engine Oil Cooler Installation Kit, # D15752 Stacked-Plate Cooler Bracket Kit, # D50020 If installing this cooler as a transmission cooler you might need the following parts: 10 AN Hose Fittings, # D98203 Stacked-Plate Cooler Bracket Kit, # D50020 And...
  view full answer...
• Will the Derale Engine Oil Cooler # D15502 Fit on a 2004 Chevrolet 1500 Silverado 4wd
  The Derale Tube-Fin Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III, item # D15502, would be an excellent choice for your 2004 Chevrolet 1500 Silverado 4wd. There is one important measurement you will need to take to make sure the the adapter will fit with your existing oil filter. Measure down from your existing oil filter to be sure there is at least 2 inches of room for installation and removal of the oil filter when the sandwich adapter is installed on your...
  view full answer...
• Will the Derale Spin-On Remote Oil Filter Adapter Work on a 1964 Ford Interceptor Y block 312 CID
  The Derale Premium Spin-On Adapter Kit - 3/4-16 Engine Filter Threads, item # D35703, is designed to replace the adapter that goes on the engine block filter landing. My reference guide only goes back to 1965 but I am confident that the 3/4-16 threads will work on your 1964 Ford motors. 312 CID translates to 5.1 Liters which is most likely what they now call the 5.0 liter Ford engine. Along with the spin on adapter you will need the Derale 1/2 inch NPT Male x 1/2 inch Barb Straight Hose...
  view full answer...
• Best Remote Mount Transmission Cooler with Fan for a 2006 Chevy Silverado 2500HD Duramax/Allison
  For your 2006 Chevrolet Silverado 2500HD with Duramax engine and Allison transmission, I highly recommend the Derale Hyper-Cool Extreme Remote Cooler Assembly part # D15870 as it consists of a stacked plate-fin cooler which is the best design on the market as it is most effective and it comes with an 800 CFM fan that will provide more air to the cooler than will ever be required for your setup. In order to install this you will need the following: Derale Remote Mounting Kit for Transmission...
  view full answer...
• Recommended Stacked Plate Engine Oil Cooler for a 2008 Dodge Caliber SRT
  The Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III, item # D15605, will work on the 2008 Dodge Caliber SRT. The engine filter thread size is one of two sizes on the caliber,3/4-16 or 20 mm x 1.5mm, so you will need to determine which (included) sleeve nut will be used. If you would like to use a larger cooler, relocate your oil filter to a more accessible location and install a stacked plate oil cooler you can use the Derale Oil Relocation...
  view full answer...
• Larger Hose Fittings for Derale # D13611 on 2010 Mercury Mariner
  On the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient # D13611, the fittings that come with the unit are 1/2" NPT x 3/8" hose barb. The other option for fittings are the Derale 1/2" NPT Male x 1/2" Barb Straight Hose Fitting - 2 Piece # D15712 along with the 1/2 inch inner diameter hose # D15700 and hose clamps # D13008. This slightly larger size is the only other option for the 1/2" NPT fitting on your cooler.
  view full answer...
• Derale High-Temperature Replacement Hose Compatibility With Aluminum Tubing 1/2 Inch Outer Diameter
  Yes. The Derale High-Temperature Replacement Hose for Engine Applications - 10' Long # D15700 can be used safely and reliably to connect 1/2 inch outer diameter aluminum tubing using clamps like # H03-0001. You will want to be carefull when clamping to make sure the clamp is not twisted when compressing as aluminum tubing is a soft metal and could crimp and possibly leak if not applied correctly.
  view full answer...
• Supplemental Transmission Cooler Recommendation for a 2008 Cadillac Escalade
  Actually for best results you would want to keep your factory transmission cooler and then add a supplemental one like the part # D52508 that you referenced. You would also need two of the barb fittings part # D98202 and then hose like part # D15700 and hose clamps # D13008 as well. You will want to route the cooler downstream of the factory cooler so that it first goes through it and then through the Derale. Your fluid temps are crazy high right now, but with an efficient cooler like...
  view full answer...
• Oil Filter Relocation Kit for a 2014 Ford F-150 Lariat 4x4 with 3.5 Liter EcoBoost Motor
  Derale Remote Dual Oil Filter Mount Kit # D15707 is not vehicle specific so you could potentially use it with your 2014 Ford F-150. I assume though that you will want to place the oil filters where you can easily reach them. For that you will need a spin-on adapter to fit in place of your existing oil filter. Your truck uses a filter with 22x1.5 threads. For a spin-on adapter use # D15724. Then you will just need a couple of hose fittings for it, # D98103, and some hose, # D15700 (for...
  view full answer...
• Can a Remote Transmission Cooler Be Mounted Under the Front of a Truck Bed
  Technically, with enough extra hose, you could mount it anywhere that is safe and does not expose the cooler core to road debris. I have not heard of anyone mounting a cooler in your chosen location though. You would also most likely need more transmission fluid because of the extra hose that would be needed. I recommend staying under the hood because the less hose that is used the less likely it is to get damaged. Plus it will be easier to install. If extra hose is needed a ten foot section,...
  view full answer...
• What Size Hose is Used with the Replacement Core for Derale Tube and Fin Coolers
  The hose used for the Replacement Core for Derale Tube and Fin Coolers, item # D15302, is 10 feet of 1/2 inch, inner diameter, OEM spec Hose. We carry the Derale High-Temperature Replacement Hose for Engine Applications - 10 feet Long, item # D15700.
  view full answer...
• Can Derale Oil Filter Relocation Kit D15725 Be Installed Upside Down
  My contact at Derale advised that while it is technically possible to install their Oil Filter Relocation Kit # D15725 in an inverted position (as is sometimes done on race cars) this is not recommended. The main reason is that you'll have a real mess on your hands when it's filter change time. He suggested that a better option is to find an alternative location where you can keep the setup in the usual upright orientation. You might need some additional oil line such as # D15700. You may...
  view full answer...
• How Long is the Hose in Derale Engine Oil Cooler # D15405 for a 2014 Ram 1500 5.7 Liter
  The Derale oil cooler # D15405 comes with 10 feet of 1/2 inch hose. You could add another 10 feet using # D15700. Then you would just need a 1/2 inch line to 1/2 inch line hose barb fitting from an auto parts store and some additional hose clamps # D13008. For transmission cooler # D13503 there are no special fittings required for installation. But if the included Insta-dapt fitting does not fit your external transmission cooler and the stock lines are metal you would need to cut and flare...
  view full answer...
• Transmission and Power Steering Cooler Recommendation for a 2005 Honda Odyssey
  Since you are planning on buying a transmission cooler like the Derale Transmission Cooler, part # D13502, I would consider purchasing the Derale Combination Cooler Core, part # D15321. This cooler can be used for cooling both the transmission fluid and the power steering fluid on your vehicle in one compact package, see photo at right. You will need to measure to decide if you will be able to mount the transmission cooler first. The dimensions of the Derale Combination Cooler Core are...
  view full answer...
  
• Will the Oil Cooler Kit # D15502 Fit on a 2007 Mustang with Supercharged 4.6 Litre Making 480 WHP
  I checked on the oil coolers available for your vehicle and the recommended cooler kit is the Derale Tube-Fin Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III, item # D15502, that you selected. This kit will have the correct fittings to install the cooler. You will need to do some measuring before selecting this kit though, especially since you have some aftermarket additions. First, you need to make sure that you have 2 inches of clearance below the original...
  view full answer...
• Fittings and Other Parts Needed to Install Transmission Cooler D52508 in a 2010 Chevy Tahoe
  Derale Snap-In Radiator Adapter Fitting # D13035 is recommended when installing a transmission cooler on the 2010 Chevy Tahoe. I have linked a video featuring this fitting for you. In addition to the fitting and the core, # D52508, you will also need a bracket kit # D50020 to mount the cooler, hose clamps, # D13008, and about 10 feet of hose, # D15700. We also have a 25 foot length of hose, # D15799, if you want to err on the side of caution; especially if you are also installing a bypass...
  view full answer...
• Derale Atomic-Cool Remote Fan-Powered Oil Cooler D15450 Fit in 1971 Camaro with 5.7L V8
  Engine oil and transmission fluid coolers such as the Derale Atomic-Cool Remote Fan-Powered Oil Cooler # D15450 are not vehicle-specific. They can be installed on just about any vehicle that has a suitable mounting point. Since this is a remote cooler that does NOT depend on passive air flow from the vehicle's motion it will cool your oil at any speed and you can put it pretty much anywhere you want to. The kit is intended to fit all vehicles with engine block oil filter landings ranging...
  view full answer...
• Remote Dual Oil Filter Mount Kit # D15707 for a 2003 Jeep Wrangler X with 4.0 Liter
  Derale remote dual oil filter mount # D15707 is not vehicle specific so you would be able to use it on your 2003 Jeep Wrangler X. The filters that you use with this kit would have to have 3/4"-16 threads. If additional hose is needed you can use # D15700 for a 10 foot long section. And for hose clamps use # D13008.
  view full answer...
• Remote Oil Filter Kit For A Yanmar Model # 3JH4E 40HP Engine
  The correct remote oil filter kit for your Yanmar 3JH4E is the Derale Oil Filter Relocation Kit part # D15718. This kit will increase your oil capacity in addition to including all parts needed for installation. The kit comes with 10' of hose therefore, you will need the Derale High-Temperature Replacement Hose for Engine Applications part # D15700 if you require more length for your application. This relocation kit will require you to change your oil filter from 20mm x 1.5mm to a filter...
  view full answer...
• Recommended Transmission Cooler/Fan Combo for a 2008 GMC Sierra 3500 with Duramax
  Yes, we absolutely have remote mount transmission cooler and fan combos that will work on your 2008 GMC Sierra 3500. For this, I recommend Derale Hyper-Cool Remote Transmission Cooler Kit part # D15960. The Derale Hyper-Cool is an excellent option that will drastically decrease transmission fluid temperatures so you won't have any issues towing heavy loads or towing through mountains or steep inclines for that matter. This is important because increased transmission fluid temperatures result...
  view full answer...
• Replacing the Hoses That Come With the Derale Direct-Mount Remote Cooler Kit # D20561
  Yes, you can certainly replace the hoses to the Derale Direct-Mount Remote Cooler Kit # D20561 with a transmission hose by removing the clamps and using standard worm drive clamps. You can also reuse the fittings on the ends of the hoses as well. I confirmed this with my contact at Derale. We also have replacement hoses that you can find with parts # D15740, # D15700, and # D15799.
  view full answer...
• Engine Oil Cooler with Thermostat for a 2006 Toyota Tacoma with V6 Motor
  First you would need an engine oil cooler kit. I recommend # D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not required. Oil that is cooler than 180 degrees will bypass the heat exchanger, so your engine will warm up faster. You may need some extra hose like # D15700 for 10 feet. And for hose clamps use # D13008. I have included a couple of links to oil...
  view full answer...

Do you have a question about this Accessories and Part?