Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan - Class V

See what our Experts say about this Derale Engine Oil Coolers

• Engine Oil Cooler Recommendation for 2014 Ram 1500 with 5.7 liter V8
  The Derale Stacked Plate Engine Oil Cooler part # D15405 is a really great option for an engine oil cooler for your 2014 Ram 1500 with a 5.7 liter V8. It's a larger stacked plate style of cooler which will do a great job lowering your engine oil temps when you are in the desert.
  view full answer...
• 12 Volt Ignition Source Needed for a Remote Engine Oil Cooler
  The 12 volt ignition source needed to install remote cooler # D15450 is not a constant draw on the circuit meaning that it is only used at the thermostat switch. But the fan does draw continuous power when running. It wouldn't overload a circuit provided that the 12 volt ignition source used is rated for more than 15 amps which is the amount of continuous power the fan draws. Usually the radio circuit is what people choose. But any circuit that has power only when the ignition is turned...
  view full answer...
• Remote Engine Oil Cooler for a 2007 Dodge Ram 2500 with 5.9 Liter Cummins Diesel
  Your 2007 Dodge Ram 2500 with 5.9 liter Cummins diesel should use a 22 x 1.5 oil filter thread size and the remote oil cooler # D15450 does come with that size sleeve nut, among others. So yes, you can use it on your truck. The amount of additional oil depends on how much hose you use to install the cooler. You will want to check the oil level after installation to determine how much more oil is needed. Because the amount of hose used varies there isn't a set amount of extra oil you would...
  view full answer...
• Remote Engine Oil Cooler for a 1984 Chevy G30 Van Class C Motor Home
  Provided you have space for cooler # D15604 you could certainly use it on your 1984 Chevy G-series van. The overall depth is 2 inches, width 13 inches, and height 4-9/16 inches. Or you could go with a remote cooler that has it own fan like # D15450. With this set up you are not limited to placing the cooler in the front of the vehicle. It could go anywhere there is space since it has its own fan. It is 4-5/16 inches deep, 12-3/4 inches wide, and 9-3/8 inches tall.
  view full answer...
• Is Derale Atomic-Cool Remote Engine Oil Cooler A Fit For 2012 Ram 2500
  The Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450 is universal fit item for heavy duty vehicles. This product is intended for a vehicle that has a class V hitch. Which means if your vehicle is able to tow up to 20,000lbs Gross Towing Weight and has tongue weight rating of up to 2,000lbs and you have that type of hitch. If those specifications is what your 2012 Ram 2500 has this product will work. The demensions of this product are 12-3/4" Wide x 9-3/8" tall x 4-5/16"...
  view full answer...
• Hose Length in a Derale Remote Engine Oil Cooler and How Far from the Engine Can it be Mounted
  An engine oil cooler with fan, like # D15450, has a 10 foot OEM spec hose. Provided that you are within the range of the hose you should not see any significant change in oil pressure or flow when using this kit. Because this system has its own fan, it can be mounted anywhere that you have space in the engine compartment.
  view full answer...
• Engine Oil & Transmission Cooler Recommendation for 2011 Dodge Durango
  The two coolers could easily fit together. Main reason is that the oil cooler kit part # D15450 that you referenced can be remote mounted basically anywhere since it comes with it's own fan. The transmission cooler part # D13504 would then need to mount in front of the radiator and fit easily.
  view full answer...
• Derale Atomic-Cool Remote Engine Oil Cooler # D15450 Thermostat not Turning Fan On
  I contacted Derale and they confirmed the thermostat on the Atomic-Cool Remote Engine Oil Cooler Kit # D15450 needs to be reading 180°F for the fan to turn on. They suggested to make sure you have everything installed correctly. This includes checking that you have the thermostat fitting installed on the inlet side of the oil cooler. Next, check the wiring for the thermostat switch. On the thermostat switch, one terminal should be wired to the positive wire coming from the electric fan...
  view full answer...
• Recommended Supplementary Transmission Cooler for 2005 Nissan Frontier
  The Derale transmission coolers we offer are intended to be supplements to the OEM coolers already installed in a passenger vehicle. In your case with a Nissan vehicle that has one of those troublesome leaking coolers (that could allow engine coolant into your transmission!) you'll really be better off replacing the radiator. If you feel you still need additional transmission cooling then you can install an add-on supplementary cooler like the Derale # D13502. You can install as large...
  view full answer...
• Will the Derale Atomic-Cool Remote Engine Oil Cooler Kit Part # D15450 Fit a 2007 Ford Ranger 4.0
  The Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan - Class V part # D15450 is a remote mounted engine cooler that can be mounted anywhere on the vehicle that space is available for. The engine oil cooler kit comes with 5 oil filter thread adapters for various vehicles. For your 2007 Ford Ranger, you will want to use the thread adapter with the yellow paint marking as this has the 3/4-16 thread size needed for the oil filter thread on your 4.0 V6 engine. This engine oil cooler...
  view full answer...
• Will a Derale Atomic-Cool Remote Engine Oil Cooler Fit a 1997 Fleetwood Bounder with Ford 7.5 Liter
  Engine oil coolers like # D15450 are not vehicle specific. This cooler will fit the 460 cubic inch motor in your RV. It has 13/16-16", 3/4-16", 18mm, 20mm, & 22mm sleeve nuts which are the most common sizes. The 460 (7.5 liter) Ford motor should take the 3/4-16". Coolers that have their own fans like this one will provide the optimum amount of cooling no matter where they are positioned!
  view full answer...
• How To Install an Engine Oil Cooler On a 1995 Fleetwood Motorhome with 454 GM Engine
  In order to install the Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan part # D15450 on your 1995 Fleetwood Motorhome with 7.4L 454 GM Gen V Engine you will need to simply remove the factory oil cooler lines that feed into the engine block next to the oil filter and then attach the new oil cooler lines with fittings directly to this ports thereby bypassing the factory oil cooler. The sandwich adapter would then not be used for this install.
  view full answer...
• Will a Derale Atomic-Cooler Remote Engine Oil Cooler Fit a 2008 Hummer H3 with 5.3 Liter Engine
  The Derale Atomic-Cool oil cooler, # D15450, comes with several adapters to fit numerous motors: 3/4-16, 13/16-16, 18mm x 1.5, 20mm x 1.5, 22mm x 1.5. Based on my research the 5.3 liter used in the 2008 Hummer H3 will use filter thread size 22mm x 1.5. And it will use the included 2-3/4 inch o-ring. So yes, this cooler will fit your Hummer. You may find that you need to go with a shorter oil filter if space is limited. The shortest that will fit is Wix filter 57060. I have included a...
  view full answer...
• Fan Oil Cooler Recommendation for 2012 Ford F-150 EcoBoost
  According to the Ford towing guide the 3.5L EcoBoost engine in your 2012 Ford F-150 means it has more than enough power to pull your 6,000 lb trailer, although pulling up long grades with a heavy trailer on a hot day will put more stress on your vehicle so upgrading the oil cooler is a great idea. For your application I recommend checking out the Class V Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450 for a few reasons; you can't overcool your engine on a hot day, and this...
  view full answer...
• Recommended Oil Cooler Kit with Sandwich Adapter for 2002 Ford F-250
  I'd recommend the Derale Plate-Fin Engine Oil Cooler Kit with Spin-On Adapter, # D15451. This kit comes with everything you need to install this cooler. It has the heat exchanger, a spin-on remote adapter, hoses, rings, etc. The plate-fin cooler gives you strength and efficiency. This oil cooler comes with a remote mount oil filter adapter, not the sandwich adapter. This allows you to mount the oil filter wherever you desire. However, if you are looking specifically for a sandwich...
  view full answer...
• Recommended Transmission And Oil Cooler For 2015 Toyota Tacoma
  The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503 is a great choice for your 2015 Toyota Tacoma 4x4 with 4.0L V6 and the plate-fin is a good way to go. The internal turbulator agitate the fluid to facilitate heat transfer and prevent any undesirable drop in pressure. For your engine oil cooler, I recommend the Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter (Multiple Threads) - Class V # D15405. This is the complete...
  view full answer...
• How Does the Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450 Install on a Vehicle
  You got it! The sandwich adapter of the Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450 would install were you current oil filter installs and then the filter would thread onto the sandwich adapter. Check out the installation instructions I attached as well.
  view full answer...
• Engine Oil Cooler Kit to Fit 1999 Dodge Ram 1500 Pickup
  The Derale Atomic-Cool oil cooler, # D15450, that you reference comes with several adapters to fit numerous motors: 3/4-16, 13/16-16, 18mm x 1.5, 20mm x 1.5, 22mm x 1.5. Based on my research the 5.9 liter used in the 1999 Ram 1500 4x4 Sport will use filter thread size 3/4-16. And it will use the included 2-3/4-inch O-ring (with adapter) and 3-1/2-inch O-ring (with sandwich adapter). So yes, this cooler will fit your pickup. You will also want to consider that the sandwich adapter will...
  view full answer...
• Oil & Transmission Coolers for Ford F-53-Based Class A RV
  Based on my research the 1998 Fleetwood Bounder M-36S Class A RV with the Ford 460 engine is based on the Ford F-53 chassis. Coolers are not vehicle-speciofic; you can install as large a cooler as you have space to mount one. Coolers are also not fluid specific; the same cooler model can be used for engine oil and for transmission fluid or even power steering fluid. Derale Class III cooler # D15551 includes a spin-on adapter in the required 3/4-16 thread. This will be a good choice for...
  view full answer...
• Installation of Oil and Transmission Coolers on 2000 Ford F-250 with 5.4L V8 Engine
  Most oil and transmission coolers like the Derale Atomic-Cool # D15950 are not vehicle specific so you can install as large (and efficient) a cooler as you have the space to install it. An exception is the pan-type of transmission cooler like the Derale # D14208 which is designed specifically for vehicles with an E4OD, 4R100, 5R100, or 5R100W transmission. Coolers are also NOT fluid-specific to either oil or transmission fluid - they can be used in either application. If you intend to...
  view full answer...
• Derale Atomic-Cool Remote Fan-Powered Oil Cooler D15450 Fit in 1971 Camaro with 5.7L V8
  Engine oil and transmission fluid coolers such as the Derale Atomic-Cool Remote Fan-Powered Oil Cooler # D15450 are not vehicle-specific. They can be installed on just about any vehicle that has a suitable mounting point. Since this is a remote cooler that does NOT depend on passive air flow from the vehicle's motion it will cool your oil at any speed and you can put it pretty much anywhere you want to. The kit is intended to fit all vehicles with engine block oil filter landings ranging...
  view full answer...
• How to Determine if Engine Oil Cooler Will Fit 2015 Ram 1500
  The Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450, along with other aftermarket oil and transmission coolers, is not vehicle-specific. What that means is it will mount in any vehicle so long as you have enough room for it to fit; this cooler measures 12-3/4" wide x 9-3/8" tall x 4-5/16" deep so you would need at least that much space for it to fit. You will not need an additional adapter because the sandwich adapter it comes with is a universal fit, and it also comes...
  view full answer...
  
• Engine Oil Cooler For a 2011 Ford F-150 With 3.5L EcoBoost Engine
  Yes, adding an Derale Plate-Fin Engine Oil Cooler Kit # D15405 will greatly help to reduce engine oil temperatures. With your 2011 Ford F-150 having the 2 turbochargers they are transferring a lot of heat into the engine oil as that is what lubricates and cools the turbos. This cooler is much larger at 9-7/8" Wide x 9-1/2" tall than the factory cooler to reduce the engine oil temperature much better. We also have the Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan # D15450 which...
  view full answer...
• Transmission Cooler for a 2009 Nissan Rogue
  for a transmission cooler for your 2009 Nissan Rogue I recommend Derale cooler # D13503. This will add extra cooling capacity beyond what the factory system is capable of. Please note that you will likely need to add additional transmission fluid since the installation of a cooler increases the volume of the system. I have linked a video showing an example installation on a similar vehicle.
  view full answer...

Do you have a question about this Engine Oil Cooler?