Larger Hose Fittings for Derale # D13611 on 2010 Mercury Mariner
Question:
Hi just did an install on a 2010 Mercury Mariner v6 4x4 same as an escape Had an issue with the hose not fitting over the factory trans line both locations, at the radiator and at the line going back to the transmission the hose that come with this is 3/8 hose my question is do they make different barb Fittings that go into the cooler? Like a large one that will work with the larger hose that the factory line are? I was able to force it over the factory lines and used two camps to make sure it does not come off,but would prefer a different screw in bard line that matches the size of the factory lines and hose making this an easier set up. I do know this is not made for one type of car or truck but was wondering if they make different barb Fittings than what come with it.
asked by: Jeff
Expert Reply:
On the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient # D13611, the fittings that come with the unit are 1/2" NPT x 3/8" hose barb.
The other option for fittings are the Derale 1/2" NPT Male x 1/2" Barb Straight Hose Fitting - 2 Piece # D15712 along with the 1/2 inch inner diameter hose # D15700 and hose clamps # D13008. This slightly larger size is the only other option for the 1/2" NPT fitting on your cooler.
Products Referenced in This Question
Derale Stainless Steel Hose Clamps (4 Piece)
- Accessories and Parts
- Transmission Coolers
- Hose Clamps
- Derale
more information >
Derale High-Temperature Replacement Hose for Engine Applications - 10' Long
- Accessories and Parts
- Engine Oil Coolers
- Hoses
- 10 Feet Long
- Derale
more information >
Derale 1/2" NPT Male x 1/2" Barb Straight Hose Fitting - 2 Piece
- Accessories and Parts
- Transmission Coolers
- Fittings
- 1/2 NPT x 1/2 Hose Barb
- Derale
more information >
Product Page this Question was Asked From
Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Car
- Standard Mount
- 11W x 3-7/8T x 1-1/4D Inch
- With 1/2 Inch NPT
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Anti-Rattle Devices
- Article: Engine Oil Coolers
- Q&A: Choosing a Transmission Cooler for a 2019 Jeep Grand Cherokee
- Q&A: What is Difference Between Weight Distribution Tongue Weight and Weight Carrying Tongue Weight
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What do the Class Ratings Mean on the Transmission Cooler Pages
- Q&A: Mounting Hole Dimensions for Flex-a-lite Transmission Cooler FLX400117
- Q&A: How to Test Brake Controller without Trailer Connected
- Q&A: Location of Fuse for Trailer Power in 2012 Chevrolet Colorado