Derale High-Temperature Replacement Hose for Engine Applications - 5' Long

See what our Experts say about this Derale Accessories and Parts

• What Inner Diameter Hose is Recommended for Use with Transmission Cooler
  Transmission cooler hoses will have an internal diameter of 11/32 inch like the part # D13003 whereas the part # D15701 has an inner diameter of 1/2 inch. For a transmission cooler application that hose is just going to be too large.
  view full answer...
• Recommended Stacked Plate Engine Oil Cooler for a 2008 Dodge Caliber SRT
  The Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III, item # D15605, will work on the 2008 Dodge Caliber SRT. The engine filter thread size is one of two sizes on the caliber,3/4-16 or 20 mm x 1.5mm, so you will need to determine which (included) sleeve nut will be used. If you would like to use a larger cooler, relocate your oil filter to a more accessible location and install a stacked plate oil cooler you can use the Derale Oil Relocation...
  view full answer...
• What Size of Flexible Line is Used for Installing Transmission Cooler
  For transmission flexible line we have the # D13016 which has an inner diameter of 3/8 inch.
  view full answer...
• Hose that is Compatible with Engine Oil for Air Conditioning System on a 1958 Plymouth Savoy
  It depends on the hose. The part that you came from, # T0778500, is a fitting. Hose for high temperature engine applications such as # D15799 would work with engine oil just fine. This is 25 feet worth of hose. It is available in different lengths: 8 feet # D15740 5 feet # D15701 All of these lengths have a 1/2 inch inner diameter.
  view full answer...
• Replacement Rubber Grommets for Pack 'Em Shovel Rack for Utility Trailers # PK-23
  Pack 'Em does not offer replacement round rubber grommets for their Pack 'Em Shovel Rack for Utility Trailers # PK-23. My contact there has not had a request for these before now. I can think of a potential solution for you, however. You could get a length of rubber tubing, such as our oil line # D15701 and cut a slit along its length. Then simply cut it to the length required to fill the round opening in the Pack 'Em rack and simply slide it onto the edge of that opening. A utility knife...
  view full answer...
• Will the Derale Spin-On Remote Oil Filter Adapter Work on a 1964 Ford Interceptor Y block 312 CID
  The Derale Premium Spin-On Adapter Kit - 3/4-16 Engine Filter Threads, item # D35703, is designed to replace the adapter that goes on the engine block filter landing. My reference guide only goes back to 1965 but I am confident that the 3/4-16 threads will work on your 1964 Ford motors. 312 CID translates to 5.1 Liters which is most likely what they now call the 5.0 liter Ford engine. Along with the spin on adapter you will need the Derale 1/2 inch NPT Male x 1/2 inch Barb Straight Hose...
  view full answer...
• Can Extra Ports on Filter Landing of Derale D15749 Relocation Kit Be Used to Install an Oil Cooler
  You certainly can. To install a cooler, you'd just need a cooler such as # D15452, two fittings, part # D98103, some replacement hose like # D15701 and some pipe clamps like # D13008. Remove the plugs, install the fittings, place the cooler where it'll catch air and run the hose. You'll want to use teflon tape like # A05-0265 on the fittings installed into the filter landing.
  view full answer...
• Towing Capacity and Transmission Cooler Installation on a 1999 Honda CR-V
  I was able to find on the Honda website the specs for your 1999 Honda CR-V. The towing capacity is listed as 1000-lbs. Transmission coolers come in a variety of types and sizes. These items are not vehicle-specific, so you can install the largest cooler for which you have space to mount it. The best location within the engine compartment is in front of the air conditioner condenser as this placement provides maximum air flow and hence best cooling. I have linked two articles that provide...
  view full answer...

Do you have a question about this Accessories and Part?