Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies and interior trim paneling to access this harness.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (145 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Harness was spot on for my application no issues.
I had the wire harness installed in 20 minutes. fantastic .
Easy installation works great!
Worth spending the little extra to get this custom made quality kit. It was very easy to install and is still working great.
Father put this on his van within minutes. Haven’t tested it out with the trailer yet, but installation was a breeze
Very durable and easy installation. I’ve made multiple 400 mile trips with 6x12 uhaul trailer full of custom cabinets (easily a few thousand lbs) and have had no trouble at all. I installed the hitch in about an hour in the dead of winter. Would’ve taken half the time if it wasn’t so cold.
The product is great. It went on a 2013 Ford E250. Loved the factory connections. It made the install easy. I ran the harness down through the opening for the spare tire lock instead of letting it hang out the underside of the rear door. Also, I ran the driver-side line under the plastic molding along the floor as opposed to going over the door frame. I had to do that since I ran the harness out the spare tire lock opening. I wanted this harness to remain in place all of the time without worrying about damaging it during loading and unloading.
Brian
2/25/2015
Still good. No problems with this product, at all.
Excellent experience. Customer service person was very knowledgeable. She found the right part for my van quickly. She asked several questions to make sure I was getting the right pat and also everything else I would need for the install. She shipped the hitch and electrical assembly the same day for next day delivery. As soon as it shipped she sent my tracking number and followed up with me a soon as it arrived to make sure everything was good.
My mechanic had no problem with the install - perfect fit. This is my third order with etrailer. I'll ever buy any where else.
Jay
11/21/2017
Everything still working flawlessly Thank you
Within 3000 miles the wires came loose from the connections and shorted the light system, unfortunately withing a few minutes of this happening, I was stopped by a office. I could have gotten a ticket but instead was given a warning. Had to re wire on the spot around the connections to be able to move the van.
The product and price is fine. The service by etrailer is terrible and it took a month to receive my order. I called in to cancel the order and they sent me two wiring harnesses (???) and also didn't cancel the order. I have emailed three times trying to return the items and no one follows through. Most of the correspondence is automated with fake human names so the buyer can't tell if they are talking to a human or robot. I will never buy from etrailer again.
Katrina B.
4/11/2022
It is unfortunate that you had such a bad experience with us. I have sent this over to our customer service team for them to better assist you.
I have ordered from this site before and never had any problems. I was disappointed in this purchase though because it describes the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C56020 to fit ANY 04-13 Econoline Van which is not true. It DOES fit any passenger or cargo Econoline Van. If you own a Regency(conversion style) van it does not fit without extreme modifications. Etrailer.com is an amazing company and has always been easy and great to deal with! I love this site and will continue to use them!
Patrick B.
5/30/2014
Our hitches and wire kits are designed to fit OEM production vehicles, as they roll off the assembly lines. Aftermarket modifications, including conversions, make changes to the vehicle and some can affect compatibility. A van conversion involves major modifications including changes to the electrical systems.
fit and worked perfectly. Would be nice if a piece of sheathing to protect the wires where it has to go over pinch welds behind the plastic trim panels were included. Otherwise a dozen wraps with electrical tape takes care of that.
Twiisted71
9/19/2016
Works perfectly. Lookig back however I wish Id gone to the trouble of installing a 7-way brake harness
this wire harness ws put on 2012 Ford van, it was easy and fast, the quality of the
components' was great, compared to other products that I had purchased at
Harbor tools. Great product and easy instructions.
Daniel P.
10/24/2017
Working just fine , and so easy to install, thanks
Item was fine but etrailer was really challenged at providing customer service. The automated system made mistakes and the rep sent two parts on accident and eventually I was able to return but it wasted some of my work time
Fine. The directions and video could be improved since no one mentioned the back up lights really did not need to be involved with the connections. Just the signal and brake and lights are unplugged and replugged. Textbook vs reality.
Craig D.
7/7/2015
Just fine.
This harness is truly plug-n-play. Couldn't be any easier. If you know how to use a screwdriver, you can install this. Put it on an '07 E-350 Ford van, and it works great. Karen @ etrailer knew just what I needed & recommended this product, and I'm glad she did. Thank you Karen!!! 1st time ordering from etrailer, and I will certainly order from them again!!
James B.
9/20/2018
The plug-n-play wiring harness has been working flawlessly. I couldnt be any more satisfied. I also ordered a custom fit hitch receiver at the same time, and it has been great. Installation instructions were very clear, and installed it in about 10 minutes with no drilling whatsoever. Just what I wanted & needed. The best part... everything was shipped to my doorstep and I saved over $100 from my local auto parts store. Im a very satisfied customer, and have recommended etrailer to all my friends.
Connectors did not fit through grommeted opening on floor. Wound up cutting the grn/wh wire and fed from top down then spliced them together. Not ideal but better than enlarging opening in floor. Connectors on taillights fit well. Overall happy with item.
Jenny N.
2/23/2022
For this harness you would want to remove the grommet and cut a slit large enough to route the custom wiring harness though. I recommend viewing our video install on a 2011 Ford van.
Helpful Links
Easy to install, good fit to existing wiring, although the pigtail to the trailer plug could be a little longer (6" more?), but long enough for my trailer wiring to reach the plug. I think I should have bought the unit that had a control box included, because my turn signals flash as if there's a bulb out from the extra draw to the trailer (only turn signals, NOT with the 4-ways . . . ). Not a big deal, gets the job done, the fast signal is a small issue.
Customer service was great. Had to call them to discuss my needs, they knew what they were talking about and sold me the right parts. Install was simple when following the instructional video they have on this site. Very nice having that resource, more helpful than a phone call because you can pause it. :) I installed a flat four and a seven pole with a trailer brake controller to my 2006 E-250 van, worked the first time with no blown fuses like the old days.
Peace,
Marc
Alpena, MI
Simplified the addition of a towing package. Wires allow electrons to flow effortlessly while creating a warm glow across the resistive lighting elements. Havent been so happy since the day of my wedding, birth of my son! If I had use for them I would purchase like 100! Best financial decision I could have made and a very solid product!
Worked great was able to install in about 30 min. I needed it fast and called and they had it to me just as they said. I well definitely order from etrailer in the future.
Steven M.
6/24/2019
Still as happy with it as the day I got it. Works great
Plugged in easily and worked perfectly. I can't say enough good things about etrailer. Great customer service. Even if things don't go as planned they make it right.
Jason
8/11/2016
No problems at all. Functions perfectly
I ordered a Curt trailer hitch receiver and the Curt T connector wiring harness from e-trailer for one of our work vans. It was here in a couple days. I watched an installation video on e-trailers website and had everything installed, including the wiring harness in about 30 minutes. It was a piece on cake. E-trailers website makes it very easy to find what equipment to use on your rig. I will most certainly go through e-trailer again!!!!!!!!!!!
As promised the harness wired up directly to the existing vehicle wiring harness the instructions were clear. Also the trailer hitch was very easy to install, and the video on your website is excellent. I would certainly recommend these products and your company to anyone in search of a trailer hitch.
This product is great! After buying the standard U-Haul wiring kit, and then spending hours taking apart the back of my E-350 and the wiring bundles only to find out that the wiring colors didn't match what I needed to splice into, I gave up and did some more on-line research. Thankfully I found this product, which is made by the same manufacturer as my hitch. Installation was straightforward and went without a hitch (no pun intended), and it worked perfectly on the first try and ever since. Thanks!
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ernie
5/12/2023
Works good