Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Recommended Sliding 5th Wheel Hitch Between Demco, Husky, Curt, and Reese
  All four manufacturers, Demco, Husky, Curt, and Reese are great companies that have been in the 5th wheel towing business for a long time. I would have no problem recommending any of them for a towing setup. Since your 1999 Dodge Ram has a 6 foot bed you will need a sliding 5th wheel hitch to give you extra turning clearance for those tight turning situations. The best 5th wheel sliding hitch that we have to offer is from Demco. The Demco Hijacker Autoslide 5th Wheel Hitch enables you...
  view full answer...
• Industry Standard Rails for a 5th Wheel Hitch in a 1999 Dodge Ram Pickup
  I have a solution for you, it sounds like you have the 5th wheel hitch and the actual rails the hitch attaches too but are needing the custom mounting hardware for your 1999 Dodge Ram Pickup. You are going to better off getting a new set of mounting hardware and rails because the mounting hardware needs to match your truck and the rails. For a set of Industry Standard Rails we have the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches # BWRVR3200. This will provide...
  view full answer...
• Is B&W Turnoverball BWGNRK1394-5W For 1999 Dodge Ram Compatible With B&W Companion Slider 3405
  Yes, the two are absolutely compatible! You do have the correct fit for the B&W Gooseneck as well as the Companion slider for your 1999 Dodge Ram, and the two will work together superbly; the two parts you need are the following: - Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1394-5W - B&W Companion 5th Wheel Trailer Hitch with Slider # BWRVK3400-5W While the title says "Custom Underbed Installation Kit" this is the B&W Turnoverball gooseneck hitch,...
  view full answer...
• Gooseneck & 5th Wheel Hitch Recommendation for 1997 Dodge Ram 3500 Dually Long Bed
  We can offer you a choice of several under-bed gooseneck hitches for your 1997 Dodge Ram 3500 dually long bed. You can see all by clicking on the link provided. The one I recommend is the B&W kit # BWGNRK1394. An install video is provided. I suggest this for its outstanding USA-made build quality that is second to none, for its limited lifetime warranty and because this gooseneck allows you to instantly convert the truck to 5th wheel towing by simply dropping in B&W's Companion 5th wheel...
  view full answer...
• Replacement OEM Plug Adapter for 7-Way on 2010 Dodge Dakota Big Horn
  The correct OEM replacement for the 7-way wiring harness on your 2010 Dodge Dakota is the # PK11933. If your 7-way was damaged when it melted you can replace both using the # HM40975-11933. There is no option that comes with a built in T that would allow you to run 5th wheel/gooseneck wiring. The only option would be to buy a complete wiring harness and add it in like the # C56001 you were looking at.
  view full answer...
• Recommended 5th Wheel Hitch for an UnderBed Gooseneck Hitch on a 2006 Dodge Ram 3500
  I would be happy to help you. The B&W Companion 5th Wheel Trailer Hitch item # BWRVK3500-5W is only compatible with the B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1313. If your 2006 Dodge Ram 3500 has a square gooseneck ball receiver in the bed then the B&W Companion will work with your truck. If your truck has a round receiver or one with threads then you will need to either replace that system or use a different 5th wheel hitch. The Demco Recon 5th Wheel Trailer...
  view full answer...
• Curt E16 5th Wheel Hitch Compatibility with 2005 Ram 2500 and 11,200 lb 5th Wheel Trailer
  The Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs # C16115 is large enough to tow a 11,200 lbs trailer regardless of the length. For your 2005 Dodge Ram 2500 long bed I recommend the Curt Custom Fifth Wheel Installation Kit for Dodge Ram - Carbide Finish # C16420-204 which will fit your truck frame without any drilling. Your other option is to use the Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish # C16200 which will require drilling...
  view full answer...
• Is there a 7-Way Extension that is 12 to 18 Inches Long
  It will require a little hardwiring but you can use extension # PK11-934. One end plugs into the back of a standard US car connector 7-Way. The other end has blunt cut wires that will need to be spliced into the existing harness you have. Another option would be to cut the wiring harness somewhere and splice in additional wires using # DW04914-1 which is sold by the foot. I recommend 2 feet in case you need some slack so you would enter 2 in the quantity box. I recommend using heat shrink...
  view full answer...
• Will Pro Series 5th Wheel Trailer Hitch and Universal Install Kit Fit a 1998 Dodge Ram Long Bed
  Yes, the Pro Series 5th wheel trailer hitch with universal installation kit, # PS30128, will fit your 1998 Dodge Ram long bed. I have included a link to the instructions for the universal kit and a video showing an example installation on a similar truck you can use as a guide, though the installation will not be exactly the same. I also recommend adding an in-bed 7-Way trailer connector, # C56001, to make hooking up easier. I have linked a video and the instructions for the wiring as well.
  view full answer...
• 5th Wheel Sliding Hitch Compatibility With Gooseneck Underbed Hitch
  With your current gooseneck hitch, you can use the Curt X5 5th Wheel Base Rails Adapter for Curt Double Lock Gooseneck Trailer Hitches - 20,000 lbs # C16210 that SHOULD be compatible with your gooseneck hitch. Based on all I can research it looks like it will fit, but I can't confirm it because I cannot test it. For your 5th wheel hitch, I recommend a sliding hitch like the Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs # C16541. You may also want to consider...
  view full answer...
• Installation Brackets for 5th Wheel Hitch to Be Installed in 2007 Dodge Ram 1500
  Any brand of industry-standard 5th wheel hitch will fit into any brand of industry-standard base rails, but the frame brackets that secure the rails to the truck frame should not be mixed with base rails from another maker since there can be compatibility issues. So in other words, you will want to use brackets from the same maker as your base rails (again, the hitch brand does not matter here). The linked page shows you all 5th wheel hitch fits for your 2007 Dodge Ram 1500 6-foot-bed...
  view full answer...
• Will Upgrading To Self-Adjusting Brake Assemblies Require Changing Out Hub/Drum Assemblies?
  The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA will work with your existing hubs. This kit comes with both assemblies and they are labeled for installation on the proper side of your trailer. There is a manual adjustment needed at install and then they will self-adjust following that installation.
  view full answer...
• Recommended 5th-Wheel Hitch for 2005 and 2006 Dodge Ram 3500 w/ 6 Foot Bed
  The Curt Q25 5th Wheel Trailer Hitch # C16265 referenced in your question is compatible with standard, above-bed base rails. If there are standard, above-bed base rails installed on both the 2005 and 2006 Dodge Ram 3500, then this hitch will technically fit either truck. However, since you mentioned that your truck has a shorter, 6 foot bed, it is instead recommended to use a sliding 5th-wheel hitch in order to provide proper clearance when making turns. I recommend looking at the Curt...
  view full answer...
• Recommended 5th Wheel Rail Kit for a 2005 Dodge Ram 2500 Short Bed Truck
  There is actually a set of custom fit 5th wheel rails that will work with your Reese 30038 5th wheel hitch. It is the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails item # RP56011-53. This rail kit is custom fit and mounts in existing holes in your 2005 Ram 2500's frame. This custom fit option will significantly reduce your installation time. I have linked an installation video below. To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck...
  view full answer...
• Where Should King Pin Sit in the Bed of a 1997 Dodge Ram 2500 for 5th Wheel Towing
  Typically the king pin will be located directly above, or slightly forward of the rear axle on any given pickup. If you were to install a universal base rail kit like the Reese # RP30035 on your 1997 Dodge Ram 2500 the (linked) instructions state that the king pin will be about 2" forward of the axle center. I have attached a picture of the instructions that show where you would install the base rails in relation to your truck bed. I recommend going with the Reese single-jaw 5th wheel...
  view full answer...
  
• No-Drill 5th Wheel Hitch Installation Kit for 1995 Dodge Ram 2500 4x4 Long Bed
  The easiest 5th wheel base rail installation will be with a custom-fit kit. For your 1995 Dodge Ram 2500 4x4 long bed we offer the Husky kit # HT31404-686 which does still require some frame drilling for installation but less than universal kits like # RP30035. We do offer other kits that do not require any frame drilling. These are the B&W Underbed Installation Kit # BWGNRK1394-5W that works with their Companion 5th wheel hitch # BWRVK3500-5W. This set-up gives you both goose neck and...
  view full answer...
• Industry Standard Rails for a Curt E16 5th Wheel Hitch on a 2008 Dodge Ram
  For your 2008 Dodge Ram, you can use the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit # DM8552016-71. This will provide you with industry standard rails. As long as your E16 5th wheel hitch uses industry standard mounting points then you will be good to go. You can also add the Curt 5th Wheel Custom Wiring Harness w/ 7-Pole Connector # C56001 to make hooking up your 5th wheels wiring easier. This wiring harness would move a 7-way connector up into the...
  view full answer...
• 5th Wheel Hitch Type and Installation Kit for 2006 Dodge Ram 2500 Short Bed
  If the hitch from the 2017 Ram is intended for the factory puck system, such as the B&W # BWRVK3670, then it cannot be installed in a truck with standard 5th wheel base rails. Your 6-foot bed Ram 2500 needs to use a sliding-type 5th wheel hitch like Curt # C16541 in order to have the turning clearance required to avoid the trailer overhang contacting the truck cab. The easiest base rail installation in your 2006 Ram 2500 will be with a custom install kit that requires less drilling. I...
  view full answer...
• Recommended 20K Sliding 5th Wheel Hitch and Install Kit for 2008 Dodge Ram 6 Bed Mega Cab
  Reese and Curt both make quality 5th wheel hitches. At a given price point a Curt 5th wheel can tend to include more features than a similar Reese or Pro Series. For example, Curt A20 Sliding 5th Wheel Trailer Hitch # C16541 features a 360-degree pivoting cushioned head. The Curt will make hitching easier (thanks to the 360-pivoting head) and deliver a smoother ride (thanks to the cushioning). The Curt A20 also has a smaller price tag AND a 10-year warranty, as compared to the Reese hitch's...
  view full answer...
• Curt 5th Wheel Base Rail Kit Options for 2003 Dodge Ram 2500 Diesel 4x4 Pickup
  For your 2003 Dodge Ram 2500 diesel 4x4 pickup you can use Curt Universal Base Rail Kit # C16200 as long as the truck does not have overload brackets. Universal kits cost a little less but they require more drilling and a longer overall installation time. The fastest and easiest 5th wheel base rail installation comes from using a custom-fit kit # C16420-204 that includes custom frame brackets that use existing holes in the frame. This means a lot less drilling. Semi-Custom kit # C16301-200...
  view full answer...
• Will Curt Fifth Wheel/Gooseneck Hitch 7-Way Fit a 2000 Dodge Ram 3500
  For your 2000 Dodge Ram 3500 the Curt Fifth Wheel Gooseneck wiring kit part # C56001 has been confirmed as a fit to allow you to install a second 7-way up in the bed of your truck for easy connection to a gooseneck or fifth wheel trailer. For just a replacement 7-way you would need the part # PK11893.
  view full answer...
• Troubleshooting Short to Battery Message with Prodigy P3 Controller When it Rains
  Water is seeping into the new 7-way most likely and is causing a short between the 12 volt output circuit and the brake output circuit. The water is somehow getting introduced into the round connector behind the 7-way. It could also be at the 7-way at the rear of the vehicle too. I'd recommend taking the connector apart to allow it to dry and then using dielectric grease like part # 11755 which will prevent the water from getting back in.
  view full answer...
• Which 5th Wheel Base Rails Are Correct For 2000 Dodge Dakota?
  For your 2000 Dodge Dakota you will want to install B&W Universal Base Rails # BWRVR3200. This fits your vehicle and offers compatibility with any standard 5th wheel hitch such as B&W Patriot, Curt, Draw-Tite, Hidden Hitch, Husky, and Reese. If you don't already own a compatible 5th wheel hitch then I would go with a sliding hitch so that you have more turning clearance. The B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs # BWRVK3270 would be a great option to fit...
  view full answer...
• Recommended Curt Sliding Fifth Wheel Hitch for 2007 Dodge Ram Short Bed
  To tow a fifth wheel trailer with your 2007 Dodge Ram with a 6-1/2 foot bed you will need to install base rails in your truck bed in order to mount a Curt sliding hitch. Base rails come with installation kits and there are two different options for an '07 Dodge Ram, depending on the model of your truck; I will list the kits and you can select the right one. Keep in mind these kits come with both the base rails and frame brackets so you do not need to purchase them separately. - 2007 Dodge...
  view full answer...
  

Do you have a question about this Custom Fit Vehicle Wiring?