Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(101 reviews)
Price: $82.06
In Stock
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C44ER
Retail:$125.95
Our Price: $82.06
You Save: 35%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (101)
- Q & A (0)
- Photos
CURT Custom Fit Vehicle Wiring - C44ER
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind the driver's-side and passenger's-side tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 3 amps per circuit
- Tail lights: 6 amps per circuit
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies and some interior paneling to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery. Once installation in complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
56459 Curt T-Connector - Surface Mount Technology - 4 Wire
Installation Details
This Product Fits The Following Vehicles
- 2021 - 2024 Nissan Rogue
- 2021 - 2024 Nissan Rogue
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C44ER
Average Customer Rating: 4.4 out of 5 stars (101 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.by: Craig04/09/2023
2023 Nissan Rogue
This is my second Nissan Rogue install. The first was a 2011, for which I already had a power cable for an amplifier that I wasn't using any more. I really prefer an inside install vs running everything outside. On this 2023 Rogue I jacked up the left front, removed the wheel, then popped all the plugs holding the fender, plus a couple of screws on the little mud flaps. I used the hole for the hood release cable to get the power cable inside. It is well protected by the fender so I'm not worried about water ingress. It feeds in behind the far left of the dash behind the fuses and was easy to pull through. I then ran it along both door foot step trim pieces and through the corner of the back seat into the spare tire area. For the light wiring I used the grommet on each side where the tail light harness passes through the body. I used heavy waterproof electrical tape to re-wrap each grommet to seal out water. The green wire with the passenger side connectors was plenty long enough keeping the control box inside by the spare tire. My last step was to insert the fuse in the red battery connector after everything was connected and buttoned up. Attached my trailer lights and everything was perfect!
by: Tom 03/28/2024
Nissan Rogue
I needed to make a trip across country in a hurry but replaced my pickup truck with a Nissan Rogue (w/o a trailer hitch). Working with etrailer we found the right hitch for my vehicle, I purchased it and had my repair shop install it all (hitch and wiring harness). the installation was accomplished easily (feedback from my shop) and I loaded down my trailer and towed it across country with ZERO issues. The etrailer folks really know their QUALITY products. If you are considering adding a hitch to your vehicle, please look them up, you cannot go wrong.
Thank you etrailer, you folks were a real lifesaver.
by: Dale 04/28/2024
This trailer wiring is a great help, but like most others the green wire for the right side is way too short. I knew this going in so I expected it. Still the manufacturer should correct it. I wired mine from the inside to keep it neat and tidy. More work, but worth it to me.
by: Martin S04/21/2024
2023 Nissan Rogue
I know I can give you a five star rating from previous experiences and videos supplied from your site. A few paint scratches from shipping but that is to be expected with such a heavy odd shape. A small gloss black paint stick will take care for that. A very easy installation. Should I thank Nissan or Etrailer for that.
by: ub5402/16/2024
2023 Nissan Rogue
Package may have been opened previously as it was taped shut. Had to splice about 2 feet more to get the wiring to reach the right tail light. Installation of the wiring took a little bit longer than the hitch install. Once installed, the wiring worked perfectly.
by: Gary 03/23/2024
Connector harness worked perfectly. The green wire for the passenger side is about 24 inches short and had to splice in a piece. Not difficult to do.
by: Blair02/02/2024
Very satisfied with each hitch/light kit I have purchased from etrailer.
by: John03/04/2023
2022 Nissan Rogue
The wire to the right taillight is too short. There is absolutely no way for it to reach. Luckily there is extra wire from the wire that runs to the battery for the splice. Other than this the installation was fairly easy with the pictures on line. The papers that come with the harness have black and white photos that are too dark to make out.
Brooke M.
7/18/2023
Regarding the instructions, I wonder if you would fine the pdf easier to read. Its located at the end of all the product information. Regarding the length of the wires, I asked the manufacturer, and you arent the only one having this issue based on other reviews. The manufacturer said to be sure to route the wire on top of the bumper beam. If you go under the bumper beam, it can use up a lot more wire length and cause it to be too short.
by: Joseph 12/10/2023
Green wire to short on wiring harness …easy fix. Fished in most of wiring, just a few tywraps, no clips needed…
by: 09/24/2023
Ford Flex
Arrived 2 days early. This came shipped in several layers of plastic wrap along with the light kit, cap and small bracket. It was delivered with no damage or scratches. It was fairly easy to install with the help of my son and a floor jack. we'll do the light kit installation another day. Everything lined up perfectly. We did remove the to plastic pins to make it easier to flex the plastic bumper. trim out of the way. I would recommend it.
by: Leigh07/18/2023
This harness works great. Plugs are perfect and instructions fair. The green wire that goes to the passenger side tail light is too short and must be spliced. Seems crazy you have to do this but there's no way around it. It's a fairly involved project but better than risking cutting a modern wiring system. Route the power wire through the cabin to the fuse box. Trying to peirce the fire wall and access the battery is way too much work and likely will damage something.
by: Zachary07/09/2023
This kit worked fine for my 2023 rogue sv. However. The wire running between the driver and passenger side taillights is too short and needs extended. This is also an issue with the uhaul kit. Just seems counterintuitive to have to extend a wire on a vehicle specific kit.
by: James02/06/2024
2023 Nissan Rogue
Absolutely the best place to order from! The video's were very helpful! Thanks everyone from Etrailer you did a great job yet again!
by: 2021 Nissan Rouge SV,SL,S07/07/2021
Looked everywhere for a 4 pin wire harness for my 2021 Nissan Rouge. Perfect fit, easy install took less than an hour fit to finish. Photos shows T-connectors separated and connected. Power was an easy run to the battery and ground was simply to chassis. I pulled the 4pin tail to the receiver… done! … First time installing any type of trailer wiring harness.
by: Dany04/13/2024
2021 Nissan Rogue
Kit is as per what we see in the video. Shipping was fast even to Canada.
by: Carl04/02/2024
Very good customer relations and fast service.
Thank you Carl Cole
by: Betty02/22/2024
Delivered day early & fit perfectly & easy to install
by: Ken 08/18/2023
Wiring harness was easy to install.
Watched YouTube to get initial overview.
by: Steve07/29/2023
2021 Nissan Rogue
You guys have known about the green wire being to short for 2 years I am not finished with this by a long shot
by: Jeffrey07/16/2022
2021 Nissan Rogue
It would be really helpful if you had a video actually showing the installation on a Nissan Rogue. Also, many people have complained that the green wire is not long enough to reach the car battery under the hood. This has been a complaint for years, so why is this not rectified? Or why is it not able to be wired in the back like other wiring kits?
Sierra K.
7/20/2022
I agree, a video would be helpful. As for the green wire, the manufacturer wants you to route the wire exactly as the instructions say to without deviation so it should be the perfect length per the instructions.
by: Dustin 12/29/2023
2023 Nissan Rogue
Great Price and Super Fast Shipping!!
by: Brian03/20/2023
Happy repeat customer
Products fit well and are well made will buy again when needed
by: Michael08/31/2021
2021 Nissan Rogue
The cable harness did not install as it was stated "It will fit" your vehicle. The right turn signal did not work, also the green lead wire was about 3 feet too short to connect to right tail lamp. The lamp connector lead wires were too short.
All in all a poor execution.
Sierra K.
9/8/2021
I apologize for the trouble you are having installing. This is a confirmed fit for your vehicle from the manufacturer. You do have to install exactly as it says, taking the simplest route, so that all wires fit.
by: Chad 06/26/2023
Easy to install and works perfectly. Directions were easy to follow.
by: Jack 10/07/2022
Nissan Rogue
The wiring from the box to the right side tail light is a little short for a 2021 Rogue. You have to cut the wires and add to it. Other than that it's really awesome.
25
101
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Do I Have To Extend The Wiring On The Curt 4-Way Harness To Install on a 2023 Nissan Rogue? You will not have to extend any of the wires on your 2023 Nissan Rogue to install the Curt 4-Way # C44ER. This kit connects in line of the factory tail light wiring and includes a separate wire to connect to the vehicle battery to prevent excess power draw on the factory wiring. I have seen some reviews where they did extend the wiring which was most likely done as they chose to route the wiring a different way to make installation easier.
view full answer... - Instructions to Guide Install of Curt Trailer Wiring on 2021 Nissan Rogue SVWe haven't had a chance to shoot an install video for the trailer wiring that fits your 2021 Nissan Rogue SV but I did attach a link to the install instructions for the Curt kit part # C44ER that fits your vehicle and each step is carefully detailed with pictures and diagrams to help.
view full answer... - Running Power Wire of Trailer Wiring Kit Up to Battery of 2021 Nissan RogueSince we don't have an install video for the harness you mentioned or one specifically on the power wire getting ran the best option we have would be for you to check out the help article I attached that covers this and use it as a guide.
view full answer... - Install Instructions Link for Curt Trailer Wiring Harness # C44ER for 2021 Nissan RogueWhile we don't have an install video for the Curt harness part # C44ER on a 2021 Nissan Rogue like yours I did attach an install instructions link to this page that shows the entire process walked through.
view full answer... - Does Black Power Wire Of Curt T-Connector C44ER For 2021 Nissan Rouge Have To Be Run To The Battery?While it is definitely more work, the black 12v power wire of the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C44ER needs its own dedicated circuit and will need to be run to the positive terminal of the battery on your 2021 Nissan Rogue with the included in-line fuse. Not doing so will void the warranty of the harness, as there are no pre-run dedicated circuits on your Rouge. Instead of tearing into the interior of your Rouge I recommend running the...
view full answer... - Is The Curt T-Connector Wiring Harness C44ER Confirmed To Fit All Models Of The 2021 Nissan Rogue?It sure is! I reached out to my contact at Curt and the Curt T-Connector Wiring Harness # C44ER you were looking at is confirmed to fit all models of the 2021 Nissan Rogue. Since you will be towing with your Rogue you will also need a ball mount, hitch ball, and hitch pin and clip. If you do not already have these I recommend getting the etrailer Ball Mount Kit # 989900 as it includes all of these components and a convenient carrying case. I included videos of the products mentioned...
view full answer... - Availability Of 4-way Connector For 2021 Nissan RougeI have another option for you, but the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM11143584 you were looking at is designed to fit a 2013-2021 Nissan NV200 and will not fit your 2021 Nissan Rouge. Instead I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C44ER as it is designed to fit your 2021 Nissan Rogue, and will not require any splicing into your factory wiring. I included a link to the written instructions...
view full answer... - Trailer Hitch & Wiring Harness For 2024 Nissan RogueThere is a trailer hitch receiver as well as 4-way wiring harness for your 2024 Nissan Rogue. I went ahead and verified both fits directly with the manufacturer for you, and the correct part numbers are the following: - Curt Trailer Hitch Receiver # C24HR - T-Connector Vehicle Wiring Harness # C44ER
view full answer... - Does etrailer Hitch For 2023 Nissan Rogue Interfere With Hands-Free LiftgateThe hands-free liftgate on your 2023 Nissan Rogue will still be functional after installing the etrailer Trailer Hitch Receiver # e93ZR. You'll need to kick your foot to either side of the 2 inch receiver, but it will still activate. I also wanted to mention, just in the interest of being thorough, that if you also plan on doing any towing with your '23 Rogue and need a wiring harness, the correct fit is the Vehicle Wiring Harness # C44ER.
view full answer... - Recommended Hitch for a 2024 Nissan RogueTo add a hitch for a bike rack to your 2024 Nissan Rogue, I recommend the etrailer item # e93ZR. This hitch is custom fit and bolts to your Nissan with included hardware. It is a class III hitch with a 2" receiver so it will work great with most bike racks on the market. It also has a 525 lbs maximum tongue weight so you will have plenty of capacity. I have linked an installation video below so you can see how to get this hitch set up.
view full answer... - Does Curt Trailer Wiring for 2021 Nissan Rogue Require Extending WiresYou are correct that to install the Curt trailer wiring harness # C44ER on your 2021 Nissan Rogue you do not have to take the interior trim completely out. I did see the review from James where he said he didn't have enough wire which is confusing since we have had other customers who installed this not report the same issue so I'd assume he may have done something different. In general I like to recommend the Tekonsha kits like the part # TK76FR over the Curt harnesses as we have found...
view full answer... - Does etrailer Install Trailer HitchesYes, we do install hitches here at etrailer. If you live in or near Wentzville, MO we would be happy to install a hitch like the # e93ZR along with the # C44ER you were looking at on your 2023 Nissan Rogue. I have added some installation videos below where we installed these for some of our customers. If you aren't nearby, we also have a network of dealers who can install the parts for you. I have attached an additional link below which will take you to our dealer locator, all you need...
view full answer... - What Wiring is Needed For a LED Hitch Cover Light On a 2021 Nissan Rogue?A LED Brake Light Hitch Cover will fit into the etrailer Trailer Hitch Receiver # e93ZR you installed on your 2021 Nissan Rogue. The light needs to plug into a 4-way flat connector so you will also need the Curt T-Connector Vehicle Wiring Harness # C44ER to install on your Nissan Rogue. Hitch covers with a light like this will all use this style connector since the vehicle is most likely going to have trailer wiring with a trailer hitch receiver installed.
view full answer... - Least Visible Trailer Hitch Receiver For a 2023 Nissan RogueThe Curt Trailer Hitch Receiver # C57HR is going to be our least visible option for your 2023 Nissan Rogue. This receiver uses a hidden cross tube which will sit behind your bumper fascia. It also has the smaller 1-1/4" receiver tube so it will be less visible than a 2" receiver opening. I recommend installing the Curt T-Connector Vehicle Wiring Harness # C44ER when you install the receiver above. This will give you a 4-way flat connector which is commonly found on small trailers you...
view full answer... - Complete Towing Setup for a 2023 Nissan RogueYes, the Curt Trailer Hitch Receiver # C24HR will work with your 2023 Nissan Rogue. This hitch has a 3,500 lb GTW, a 525 lb tongue weight capacity, and is assembled in the USA. If you're needing an entire towing setup, you're also going to need a set of wiring # C44ER, and a ball mount # C45534.
view full answer... - Recommended Trailer Hitch for Towing With 2023 Nissan RogueWe do have a trailer hitch for your 2023 Nissan Rogue. I recommend the etrailer Trailer Hitch Receiver # e93ZR. This is a custom-fit, Class III hitch with a 2" receiver. It features a bolt-on installation and a matte black powder coat finish. It also comes with a limited lifetime warranty and is made in the USA. For wiring, you can use the Curt T-Connector Vehicle Wiring Harness # C44ER. This plugs into connection points behind your tail lights so no cutting or splicing is required. Once...
view full answer... - Trailer Hitch Receiver And Wiring That Fits 2021 Nissan RogueThe Nissan Rogue underwent a design change model refresh for the 2021 model year, so a hitch and wiring can't be swapped from the 2018 model. So what you will need for a '21 Rogue is a new hitch and wiring that fits, and the best options are the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR - Curt T-Connector Vehicle Wiring Harness # C44ER I really like the Draw-Tite because it has a nice concealed look that helps your Rogue maintain its streamlined look; I have added...
view full answer...
- Best Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Nissan RogueI recommend our etrailer Trailer Hitch Receiver # e93ZR as the best option for your 2004 Nissan Rogue. I feel this is the best as it has the more commonly found 2" opening, a hidden cross tube and the matte black finish I feel looks better than others. You will want to install the Vehicle Wiring Harness # C44ER when you install the receiver. This will give you the 4-way flat connector that is most commonly found on small trailers you might tow. It will also allow for Auxiliary Lights...
view full answer... - Recommended Trailer Hitch For A 2023 Nissan Rogue The etrailer Trailer Hitch Receiver # e93ZR is confirmed to fit your 2023 Nissan Rogue. I like the etrailer hitch because it has a matte black powder coating that helps keep scratches and scuffs less visible that you get from rocks and flying road debris when towing. The etrailer hitch has a bolt-on installation and is manufactured in The USA. To tow a trailer you will also need the Curt T-Connector Vehicle Wiring Harness # C44ER and the Curt Towing Starter Kit # C45554. I linked an installation...
view full answer... - Recommended Wiring Harness for a 2023 Nissan RogueYes, we do. For a 2023 Nissan Rogue you will want the Curt T-Connector Vehicle Wiring Harness item # C44ER. This is a plug in harness that will provide you with a 4-way connector. If you are planning on towing you will also need a ball mount kit item # C45534.
view full answer... - Best Trailer Hitch Receiver Available for a 2023 Nissan RogueI feel our etrailer Trailer Hitch Receiver # e93ZR is the best option for your 2023 Nissan Rogue. This receiver has a 2" square opening which gives you a larger selection of ball mounts and hitch mounted accessories to choose from. I really like the matte black finish on our receivers as it tends to give it a clean factory appearance since it matches the accent panels manufacturers use. I recommend installing the Curt T-Connector Vehicle Wiring Harness # C44ER when you install the receiver....
view full answer... - Can a Trailer Brake Controller Be Installed on a 2024 Nissan Rogue? Yes, you can install a trailer brake controller on your 2024 Nissan Rogue. I recommend using the Curt Echo Wireless Brake Controller # C51180 as then you will not have to splice into any wiring under your dash and can use your smartphone as your controller. As long as you already have a 4-Way # C44ER you will only need the 7-Way Kit # ETBC7L so the controller will get the power it needs. The controller is able to get the brake signal from the 7-way wiring to know when it needs to apply...
view full answer... - Trailer Hitch Receiver And Vehicle Harness Recommendations For a 2021 Nissan Rogue SVI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR for your 2021 Nissan Rogue SV. I have linked an video of the installation we did installing this receiver on a 2021 Nissan Rogue SV so that you can see the fitment for reference. The receiver is rated for 525lbs of tongue weight and 3,500lbs trailer weight. I recommend installing a Curt T-Connector Vehicle Wiring Harness # C44ER to give you a 4-way flat connector. With this connector you can add Auxiliary Lights # C53201...
view full answer... - Do You Have an Installation Video for the etrailer Hitch Being Installed on a 2023 Nissan Rogue? Yes, we do! I have attached the video below for the etrailer Hitch item # e93ZR being installed on a 2023 Nissan Rogue. This hitch is custom fit and bolts to your Rogue with included hardware. If you are planning on towing you will also need a wiring harness item # C44ER and a ball mount kit item # C45534.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Video Edited:
John S
Updated by:
Wilson B
Written by:
Mike S
Installed by:
Michael B
Test Fit:
Ryan G
Video by:
Ethan H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Craig
4/10/2024
Absolutely perfect so far! I always check all my lights before I go with the trailer and it’s been great!