Recommended Wiring Harness for a 2023 Nissan Rogue

Question

Question:

I realize the hitch I just purchased for my 2023 Nissan Rogue probably does not come with the wiring harness. Do you have that item in stock?

asked by: Bill M

0

Expert Reply:

Yes, we do. For a 2023 Nissan Rogue you will want the Curt T-Connector Vehicle Wiring Harness item # C44ER. This is a plug in harness that will provide you with a 4-way connector.

If you are planning on towing you will also need a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

Absolutely! I checked with my contact at Tekonsha and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK76FR you were looking at is indeed confirmed to fit your new 2021 Nissan Rouge AWD. You are correct that there were…

view full answer...

Answer 3

Since we don't have an install video for the harness you mentioned or one specifically on the power wire getting ran the best option we have would be for you to check out the help article I attached that covers this and use it as a guide.

view full answer...

Answer 4

The inside to inside flange to flange distance of the #DT85MR Draw-Tite Class III hitch is 44 inches. Each mounting flange has 3 holes, the center hole is 2.87 inches from the mounting hole closest to the receiver tube, and the center hole and the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Recommended Wiring Harness for a 2023 Nissan Rogue

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching