Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(204 reviews)
Price: $221.71
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C22UR
Retail:$284.95
Our Price: $221.71
You Save: $63.24
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (204)
- Q & A (0)
- Photos
CURT Trailer Hitch - C22UR
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13470 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2021 - 2024 Toyota Sienna
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C22UR
Average Customer Rating: 4.7 out of 5 stars (204 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Ross03/26/2024
2024 Toyota Sienna
2024 Sienna XLE install. Great product. Fits snugly. Does not hang below other parts of the undercarriage chassis. Relatively easy install by myself, using box to support opposite side. Trimmed panel fit perfectly. Best part is it maintains the foot auto rear hatch function. Instruction video perfect!i. Used Tekonsha wiring 118824 and worked slick. Attached relay box with small matchine screw above small cover (see photo) which allows access (if ever needed) to the fuse without pulling side panes off again. Routed trailer wiring out bottom of panel so it stores in the existing side pocket. This is my third hitch from Etrailer. All went in easily!!
by: Mark 04/02/2024
Toyota Sienna
This Curt hitch went on my 2023 Sienna with no problem. It would have been a little easier with two people but was possible with just one person. Took about an hour to install in my garage. I drove the back tires onto some boards about 3 inches high to give me a little more room to work.
by: AnnieMac7601/16/2024
Toyota Sienna
This hitch works great on my 2021 Toyota Sienna. We use it for a hitch-mount bicycle rack. Easily carries 4 adult bicycles. Installation was very easy, especially with the helpful instructions and video from etrailer.
by: Steven08/11/2022
Hitch arrived quickly and was an exact fit for my 2021 Sienna. When we bought the car, I ordered a hitch to be installed by the dealer which I was told would be a 2" receiver. When I picked up the car after installation, it was a 1 1/2 " receiver. At that point I was told that Toyota didn't offer a 2", but this would have the same 3,500 pound rating. I removed the dealer hitch myself and installed the Curt with the help of a four-wheel dolly and some wood shims. Took the dealer hitch back and they refunded me the cost - about twice as much as the Curt! (I did try one of those 1 1/2" to 2" adaptors, but there was way to much slop with the two sleeves)
by: Mike 08/08/2022
2006 Toyota Sienna
Awesome product, used this on our 2022 Toyota Sienna Hybrid and it was very easy to install, 4 bolts and you're done. Very solid frame, powdercoat, just a fantastic product. This is the 2nd one of these I purchased, the first was for a 2006 Lexus 330 but that engine fried so I bought a new van and needed a new hitch.
If you go fast over a big bump or down a steep driveway the bottom of the hitch frame or hitch itself can rub on the ground a bit but that's simply the low ground clearance of the van nothing to do with the product, and it's 1/4 steel so I'm not worried about a few scrapes.
I was concerned the "kick to open" wouldn't work as this covers the sensors a bit but it still works so that was a plus, not a huge fan of the foot sensor but my wife digs it so I'm glad it still works.
I have nothing negative to say, it's a fantastic product!
Mike
8/9/2023
Still working great, it has a low clearance so sometimes it will grind on some driveways and parking lot exits, but its nothing that causes and issue and does not do any cosmetic damage you can see.
by: Daniel02/28/2024
Quick and reliable shipping and was able to take to my mechanic to get it installed and it works perfectly with my bike rack!
by: Al02/21/2024
Find another way to pack the trailer hitches
The box was damaged due to shifting weight
by: Jeff 09/30/2023
2022 Toyota Sienna
Fit perfectly, I was able to install with no assistance by supporting it with wood blocks, but a second person would make it very easy. Did not jack up the vehicle, tight but doable. Make sure you take pictures before removing the driver side panel, because there are 2 or 3 different fasteners. I chose NOT to cut and reinstall the panel because there is NOT one on the passenger side. If I ever remove the hitch, I will reinstall it.
by: Greg 10/01/2023
2023 Toyota Sienna
I'm a first time etrailer customer. Overall it was an excellent experience. The item was shipped very quickly. I liked being able to read the reviews and watch their youtube videos.
The Curt hitch receiver was so easy to install!
FYI, my local "outdoors/trailer/camping" place wanted to charge me $257.95 for the hitch receiver. They also wanted to charge me $200 for installation. That's $477.94 out the door!!!
by: JCP01/10/2024
Toyota
Well, your hitch is working out great. A very good product and a food investment for our use and the value of our van.
Many have asked about the hitch who own Toyota Siennas.
Good product, good staff, and an easy fit.
by: Tim05/23/2021
First off, excellent product and excellent customer service.
I bought a hitch receiver for my last Sienna for a bike rack and was happy with it so shopped here again. I have a 2021 Toyota Sienna Platinum trim, and this year is the first of this generation meaning the old hitch also needed a reboot. This one is easier to install than the last one I got that was almost completely hidden except for the actual receiver. With the new Sienna design the geometry makes this impossible so you see the structural bars connecting it to the van. You just need to take the driver's side panel off and trim it a bit before putting it back on over the hitch.
The bottom of the hitch sits 9-10 inches from the ground which is low but hey, it's a minivan and looking at the underside I don't think it could sit much higher anyway. I got a Meyer 4" drop/rise hitch extension to raise that by 4" which is works great. I did have to use a hacksaw and grindstone drill attachment to trim a corner off so it fit, then spray painted it, but I preferred that to getting one that stuck out even further since any extension is going to add to how far it sticks out the back. I got the this 5-bike Allen rack to go with it, it seemed to be one that again kept the bikes (and therefore the center of gravity) closer to the van compared to others. You also have to buy a 5/8" pin to secure the adapter. I made sure the pin and rack both had locking mechanisms on them to prevent theft.
Overall very happy with the hitch. It's sturdy and simple to install. Its 2" size makes it strong enough to do anything you want to do with it. Do NOT get the Toyota factory hitch- everyone at the dealership though it was a 2" hitch but it is indeed a 1-1/4" and an eyesore. This one looks nice and I would do the whole process over again. Trimming the adapter was the hard part, but it seemed to be the best option for keeping everything from sticking out too far.
by: John 11/25/2023
2023 Toyota Sienna
Took me all of about 25 minutes to install, and that included the very minor trimming of the under panel. Instructions were great.
by: Lance02/04/2024
Easy to install. One of the corners was slightly bent during shipping and that required me to use a pry bar to align the last two holes.
by: Brad 02/01/2024
Awesome service and high quality hitch with great directions
by: Vitalii04/10/2024
Fits our Toyota Sienna 2022 perfectly. Great product, we use it to carry our bicycles
by: NR06/16/2023
2023 Toyota Sienna
The shipping box arrived damaged on the box corners and there was no padding/protective wrapping around the hitch receiver. There is scratches and scuffs on the receiver paint.
Jenny N.
6/17/2023
Oh my goodness! I will have our Customer Service team reach out to you. I recommend touching up the hitch with a rust resistant paint like Rustoleum.
by: Matthew 03/13/2024
Toyota Sienna
Fit my 2023 Sienna perfectly. Easy enough to install. Only tricky part is getting the proper torque.
by: Nicholas09/28/2023
2022 Toyota Sienna
Have used etrailer for our hitches two times now, and both times have been seamless! Would recommend to anyone!
by: GWR05/12/2023
Trailer hitch receiver fit perfect on the 2022 Toyota Sienna. You have to cut away some of the black plastic splash guard but it came with instructions. I removed it to do the cutout.
by: David 07/12/2023
Fits perfect, good instructions, easy to install. Will get a chance to use it next week. We'll see if the kick open feature on the tailgate will still work, some say it does with the Curt Hitch, others no luck, but the factory hitch has no success.
by: Adam 10/25/2021
2021 Toyota Sienna
I have a 2021 Siena hybrid. I was able to install this despite being an absolute dimwit with cars. There are errors in the installation guide (as noted elsewhere on this page) - the piece of trim to be removed is on the other side.
*** If you get the wiring harness, ignore the installation instructions included with that. All you have to do is open up the spare tire / donut compartment, remove the spare, plug it in. Poke a hole in the rubber grommet that comes with the car and put the wires through. It's really, really easy!! No drilling or messing around with trim***
Etrailer customer support was great!
Adam
10/26/2022
I love this hitch! Its turned my minivan Sienna Hybrid into a light truck. No problems after a year and I use it almost every week for hauling a trailer.
by: Jamie11/17/2021
Fits like a glove. Easy installation. I’m not going to gripe about what side the panel is that you have to remove. That becomes obvious once you get under the van. The instructions say to remove a 3 x 7 piece of the panel. I removed a 2 1/4 x 6 for a snugger fit. I suggest you measure before you cut. The panel is easy to remove and I was able to cut it with some tin snips. It’s just thick plastic so it’s not hard to cut. It sits about 9 inches off the ground so be aware of the ground clearance after installation.
by: Arnold08/27/2022
Great hitch. Installed it my self after cutting away some underbody PL plastic on the driver's side. It is holding up gteat. No rust, no problems.
by: Nasif03/04/2023
Direct fit to factory mounting holes. Needed to modify the plastic trim covering the mounting holes but instructions for that was included with the trailer hitch receiver.
by: Timmy 02/13/2024
Toyota Sienna
perfectly fit on 2024 Sienna XSE
25
204
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- What Hitch do You Recommend for My 2022 Toyota Sienna?For a great trailer hitch for your 2022 Toyota Sienna, I recommend the Curt Hitch - 2" # C22UR. Apart from providing your Sienna with 350 pounds of tongue weight and 3,500 pounds of gross towing weight, the Curt comes with a superior black gloss coat over the protective base coat that provides you better protection from rust and corrosion than the Draw-Tite # DT55MR. Also, the Curt hitch is assembled in the U.S.A. while the Draw-Tite is not. As with all hitches, I recommend confirming with...
view full answer... - Recommended Trailer Hitch Receiver For A 2021 Toyota SiennaFor your 2021 Toyota Sienna I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C22UR. Curt manufactures their hitches in the US and are known for having a superior powder coating compared to their competitor, Draw-Tite. This hitch has a maximum gross trailer weight capacity of 3,500lbs and maximum tongue weight capacity of 350lbs, which will match the ratings for your vehicle at an affordable price point. You may also require a trailer wiring harness, I recommend...
view full answer... - Comparing The Draw-Tite And Curt Trailer Hitches For A 2023 Toyota Sienna The Curt # C22UR and Draw-Tite # DT55MR are fairly similar in design, with the major difference between the two being their weight capacities. The Curt has a 3,500lb GTW and 350lb TW capacity while the Draw-Tite has a 4,500 GTW and 675lb TW capacity. With the 2023 Toyota Sienna having a max capacity of 3,500lbs GTW the Draw-Tite is a bit overkill since you'd be limited to the vehicle's capacity. The only other notable difference really comes down to the paint job, which Curt's powder...
view full answer... - Differences Between Curt and Draw-Tite Class III Trailer Hitches for 2022 Toyota SiennaEssentially, other than some slight cosmetic differences the only differences between the Draw-Tite # DT55MR and the Curt # C22UR is the capacity of the hitch and where they're manufactured. The Curt # C22UR is manufactured in the USA, and has a 3500 lb towing/350 lb tongue weight capacity. The Draw-Tite # DT55MR is manufactured in Mexico, and has a 4500 lb towing/675 tongue weight capacity. Though it has a higher capacity, you wouldn't be able to take advantage of its additional capacity...
view full answer... - Is a Trailer Hitch Available for a 2021 Toyota Sienna?There is a Class III trailer hitch currently available for the 2021 Toyota Sienna, which is part # C22UR. It doesn't require any drilling and bolts right on to the frame. There is a small amount of underbody panel trimming that needs to be done, but the installation instructions I attached outline the process very clearly. This hitch has a 2 inch receiver, a tongue weight of 350 lbs and a towing capacity of 3,500 lbs. You will want to keep that in mind because that is at the top of the...
view full answer... - Trailer Hitch Compatibility With A 2022 Toyota Sienna Yes, the Curt Trailer Hitch Receiver # C22UR does fit your 2022 Toyota Sienna. This hitch has a maximum GTW of 3,500-lbs, and a maximum TW of 500-lbs. If you need the complete towing setup, you're also going to need a ball mount # D-28, and trailer hitch wiring # C59236. You'll want to measure your rise/drop first before committing to a ball mount.
view full answer... - Brake Controller and 7-Way connection for 2021 Toyota Sienna The Curt Echo # C51180 is designed to work in place of having a traditionally mounted brake controller inside your vehicle. It will allow you to handle all controls from your smart phone and is easily used on multiple vehicles and trailers with the ability to save 5 different profiles. I would suggest using our Universal Installation Kit # ETBC7 to mount your 7-Way. It gives you the correct gauge wires, and circuit breakers to ensure you don't run into issues later. If you are still in...
view full answer... - Comparing Trailer Hitch Receiver Options For 2021 Toyota SiennaThere are a pair of trailer hitch receivers that fit your 2021 Toyota Sienna, from Curt and Draw-Tite, and they are the following part numbers: - Curt Trailer Hitch Receiver # C22UR - Draw-Tite Max-Frame Trailer Hitch Receiver # DT55MR There are two main differences between the two, which are the finishes and the tongue weight capacity. The Curt hitch has a powder coat which is a bit glossier than the Draw-Tite, and the Draw-Tite has a higher tongue weight capacity of 675 lbs vs. 350...
view full answer... - Differences Between The Trailer Hitches Available For The 2022 Toyota SiennaThe two trailer hitches for your 2022 Toyota Sienna, the Curt Trailer Hitch Receiver # C22UR, and the Draw-Tite Max-Frame Trailer Hitch Receiver # DT55MR have really one difference. Both of these hitches are class III trailer hitches, that are compatible with a weight distribution system, however, the Draw-Tite # DT55MR hitch has a higher tongue weight and towing capacity than the Curt # C22UR hitch. The Draw-Tite # DT55MR hitch has a maximum towing capacity of 4,500-lbs and a maximum...
view full answer... - Comparing etrailer e56RR and Curt C22UR Trailer Hitch Receivers For a 2021 Toyota SiennaThe only difference between the etrailer Trailer Hitch Receiver # e56RR and Curt Trailer Hitch Receiver # C22UR is going to be the powder coating used. The etrailer receiver will have a matte black powder coat while the Curt will have a gloss black powder coat. Since etrailer's receivers are made by Curt the mounting points and material used is all the same and they are both made here in the USA. Personally I prefer our etrailer receiver as I find the matte black powder coating is more...
view full answer... - Recommended Trailer Hitch, Wiring, and Ball Mount for 2021 Toyota Sienna LimitedFor your 2021 Toyota Sienna Limited I recommend the Curt Trailer Hitch Receiver # C22UR. This custom fit Class III hitch has a 2" receiver and will be perfect for any accessories or towing. It features a gloss black powder coat finish and has a limited lifetime warranty. For wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness # TK69FR. This plugs directly into exiting wiring and will provide you with a 4-way connection at the back of your Sienna to power your trailer's signal...
view full answer... - Trailer Hitch Recommendation with Best Ground Clearance for 2021 Toyota SiennaI'll be more than happy to help you guys find the best solution for your 2021 Toyota Sienna. The Curt # C22UR and Draw-Tite # DT55MR hitches that fit your Sienna both have the same design and essentially the same ground clearance. Because of this I recommend going with the Curt because these hitches usually have a thicker powder coat which will help it hold up better to the elements and road debris. The Draw-Tite does have a higher weight rating but it is well over the capabilities of...
view full answer...
- Complete Towing Set up for a 2022 Toyota Sienna Van to Haul a BoatI would be happy to help you set your 2022 Toyota Sienna van up for towing your boat. You are going to need a hitch, ball mount, wiring harness, and a brake controller. For your hitch I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C22UR. This hitch is custom fit and bolts directly to your Sienna's frame with included hardware. I have linked an installation video. Your are going to need two wiring harnesses to be able to add a 7-way connector to your van....
view full answer... - Recommended Trailer Hitch For a 2023 Toyota SiennaYes, the Curt Trailer Hitch Receiver # C22UR you mention will fit your 2023 Toyota Sienna. This trailer hitch has a maximum towing capacity of 3,500-lbs, a maximum tongue weight of 350-lbs, and features a bolt-on installation; requiring no welding. Attached is an installation video for you to check out as well.
view full answer... - What Hitch and 4-Way Wiring Harness do You Recommend for My 2022 Toyota Sienna?For a hitch for your 2022 Toyota Sienna, I recommend the Curt Hitch Receiver - 2" # C22UR. The Curt hitch is compatible with all Sienna models and comes with all mounting hardware required for a bolt-on installation. Also, the Curt hitch includes a superior gloss and powder coat than the competitor Draw-Tite # DT55MR. As far as weight capacity, the hitch has a 350 pound maximum tongue weight and a 3,500 pound gross towing rating. In order to confirm whether your vehicle can accommodate...
view full answer...
- Recommended 2 Trailer Hitch Receiver For 2021 Toyota SiennaYou are correct that the trailer hitch receiver from the 2020 Toyota Sienna will not fit on your new 2021 Toyota Sienna due to the changes that the 2021 received. For 2021 Toyota Sienna we offer the Curt Trailer Hitch Receiver # C22UR which is designed specifically for the 2021 model, and has the 2" receiver you were wanting. The Curt # C22UR has a maximum tongue weight rating of 350lbs, a maximum trailer weight rating of 3500lbs, and is rated for use with a weight distribution hitch that...
view full answer... - Will Curt Trailer Hitch Receiver C22UR Disable Hands Free Lift Gate Sensor On 2021 Toyota Sienna?While Toyota is somewhat correct that installing the Curt Trailer Hitch Receiver # C22UR on your 2021 Toyota Sienna will partially block the hands free lift gate sensor, it will not disable it. You will just need to place your foot on either side of the receiver and move your foot in and out until you find the sweet spot for the sensor. If you are planning on towing with your Sienna you will also need a vehicle wiring harness # TK69FR. I included a link to the written instructions of...
view full answer... - Parts Needed To Add 7-way Connector And Trailer Brake Controller To 2021 Toyota SiennaI would be happy to recommend everything you will need to add a 7-way connector and trailer brake controller to your new 2021 Toyota Sienna. First you will need to have a 4-way connector installed of which I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. With a 4-way connector installed there are two different 7-way connector options. The first is the # ETBC7 with a traditional trailer brake controller like the Tekonsha Prodigy P3 # 90195. The...
view full answer... - Draw-Tite or Curt Trailer Hitch For 2021 Toyota SiennaLet's start with the two trailer hitches you were referring to that fit your 2021 Toyota Sienna, which are the following: - Curt Trailer Hitch Receiver # C22UR - Draw-Tite Max-Frame Trailer Hitch Receiver # DT55MR They are very similar 2 inch hitches that are both easy bolt-on installations, but I recommend the Draw-Tite # DT55MR, for a couple of reasons. One is that it has higher overall capacities, which not only speaks to the strength of the hitch, but the higher tongue weight capacity...
view full answer... - Comparing Class III Trailer Hitch Receivers For a 2022 Toyota SiennaI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT55MR over the Curt Trailer Hitch Receiver # C22UR for your 2022 Toyota Sienna. The Draw-Tite has larger chain hanger openings which will make it easier connecting the safety chains of any trailer you may tow. With the narrow openings on the Curt receiver you may need to get Quick Links # C82931 for some of the larger chain hooks. The Curt receiver has a maximum tongue weight rating of 350lbs and maximum trailer weight rating...
view full answer... - Recommended Trailer Hitch with Best Ground Clearance for a 2022 Toyota SiennaThe only real difference in style and clearance between the Curt # C22UR and Draw-Tite # DT55MR hitches for your 2022 Toyota Sienna is that the Curt crosstube bends in a little at the ends to better fit the contour of your Sienna. This means that if you're turning and going uphill that the Curt is going to give you better clearance so I recommend going with the Curt. Other than that they will have the same clearance when you are driving forward. If you're in the market for a new bike rack...
view full answer... - Comparing The etrailer And Curt Trailer Hitches For A 2023 Toyota Sienna The Curt Trailer Hitch Receiver # C22UR and etrailer Trailer Hitch Receiver # e56RR are essentially the same exact trailer hitch with the only difference being the paint. The Curt has a glossy black finish, while the etrailer has a matte black finish. Gloss black is pretty much the standard for trailer hitches but it tends to show scratches and dents more distinctly than a matte black will. Personally, I prefer the matte black because of this since it will better maintain its looks for...
view full answer... - Recommended Trailer Hitch Receiver for 2022 Toyota Sienna XLEThere are definitely hitches available for your 2022 Toyota Sienna XLE. I recommend the Curt Trailer Hitch Receiver # C22UR. This is a custom fit Class III hitch with a 2" receiver. The hitch has a max gross trailer weight of 3,500 lbs and tongue weight of 350 lbs. The # C22UR has a gloss black powder coat finish and a sturdy steel construction. It features a bolt-on installation and comes with a limited lifetime warranty. If you plan on towing, I also recommend the Tekonsha T-One Vehicle...
view full answer... - Does the Curt Hitch Work On a 2021 Toyota Sienna with Hands Free Liftgate FeatureThe Curt Trailer Hitch Receiver part # C22UR will work on a 2021 Toyota Sienna with hands free liftgate feature. They will not block the sensors completely but the hitch does slightly interfere. Basically, you most likely just need to place your foot on ether side of the receiver tube opening and you'll be fine. That said, we do not have any actual testing with this specific feature.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Noah M
Test Fit:
Shane H
Test Fit:
Jacob H
Test Fit:
Bradley B
Written by:
Eric H
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steven
8/12/2023
Still very satisfied - excellent hitch - perfect fit.