Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(81 reviews)
Price: $181.77
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C12169
Retail:$280.95
Our Price: $181.77
You Save: $99.18
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (81)
- Q & A (0)
- Photos
CURT Trailer Hitch - C12169
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12169 Curt Class 2 Trailer Hitch Receiver
Compare to Draw-Tite 36597
Installation Details
This Product Fits The Following Vehicles
- 2017 - 2024 Honda CR-V
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12169
Average Customer Rating: 4.7 out of 5 stars (81 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: George L05/06/2023
2020 Toyota RAV4
On my application, a 2022 CR-V Hybrid Touring, I would consider this installation to be “custom” at best. Hitch itself bolts on fine. Does touch the sides of the “spare tire” well, which is poor design, but not the end of the world. Instructions describe trimming of bumper cover to clear receiver area, but I also had to trim additional areas of the splash panels and bumper cover to clear the hitch. My car is also equipped with the kick to open tailgate. The sensor, module, and their bracket sit right where the hitch goes. Your options are to unplug and remove it all, or extensively cut the bracket like I did. I then reinstalled the remainder of the bracket, and then had to zip tie and relocate the module onto the hitch, and the lower sensor wire to the panels after drilling a few holes in the plastic. In the end, hitch is installed, and kick sensor still works as it should. I was able to do everything without removing the bumper cover, but it would have been a lot easier if I took it off. Overall, fitment isn’t horrible, but there’s no way you’re doing it in the 20 minutes the instructions say it should take. If you don’t have the kick to open feature, installation would be much less complicated, but the additional trimming would still be needed and isn’t shown in the instructions. This issue may only apply to Hybrid models.
by: Paul M04/24/2019
Great receiver. Looks better than I even hoped and it works great too. Your videos covering installation of the hitch assembly and wire harness were the best. They made the job go very smoothly. Thanks for great products and instruction. I’m sure I’ll be back in the future. .
by: Greg K08/26/2023
2023 Honda CR-V
Well. I was shorted a square hole spacer, I replaced with a washer. But that wasn't the main problem. After lowering the exhaust and fishing in the bolts, the holes in the hitch were off. After examining, the passenger side arm of the hitch was either bent or welded tilting in. Because I was so far into the install I decided to do a little collision work on it using a sledgehammer. The install went smoothly after that.
by: Warren07/14/2021
2021 Honda CR-V
I have to admit I was nervous about ordering the hitch, but it fit my Honda 2021 CR-V perfectly and looks amazing!! I had it installed at my local auto repair shoo. It was half the price of what the dealership was charging and looks amazing!!! If you in the market for a hitch for your vehicle I would totally recommend purchasing from etrailer.
by: Charles09/28/2022
Looks great. One trick is that for the CRV, the hitch installs inside the bumper. Had an issue with it not fitting until we tucked it under the bumper. Very low profile. Thank you.
by: Rg02/09/2020
Nice looking hitch, very little hardware exposed so it doesn't stick way out or look tacky. Looks like a factory hitch. I only use it for a hitch mounted platform carrier and it's plenty stable for the purpose.
by: Kenneth04/09/2023
The hitch is great and looks good on my CR-V. The only trick was having an automatic lift-gate sensor in the bumper. In order to get the bumper skin to reattach to the frame, I had to remove the sensor bracket and cut away most of the plastic holding the antenna and then slide it between the hitch and bumper. I wasn’t able to secure it with the screws, but it’s not going to go anywhere and the lift-gate works. I’m guessing I screwed up the warranty on the lift-gate sensor.
by: Wayne05/14/2023
Despite what’s implied by the installation video this receiver will not work with the 2023 CR-V Hybrid Sport Touring rear hatch sensor adapter nor are the measurements for the facia trimming in the instructions correct. Thanks etrailer for letting me do your fit testing for you.
Jenny N.
5/30/2023
We have seen this complaint on other 2023 CR-Vs. I know that the lift gate sensor does have to be moved and even when moved you may have a shortened area that it will function or may loose that function all together. Fascia trimming is not always exact and you may been to do more or less trimming than the instructions tell you.
by: Rod 12/27/2023
2017 Honda CR-V
Very smooth installation! Great videos!
by: Jerry05/30/2022
2018 Honda CR-V
From the instructions and a few videos we watched the installation went very well. All the parts and the hitch fit very good. Extremely happy with the quality and ease of installation. Thank you. Jerry
Jerry S.
5/31/2023
It worked as expected, very well until we were hit in the backend of or vehicle and he destroyed our bikes and your rack… we are deciding our next move. Thank you for asking..
by: Bernard 10/27/2022
Honda
My son and I installed this receiver on a 2022 Honda CR-V Hybrid some months back.. I am still enjoying the installation for it allows me to use a bike rack to carry my bike to parks here in Tampa, FL. One of the good things about this hitch is that it remains mostly hidden under the car with only the square receiving tube protruding. I noticed that some other receivers had a lot of the metal superstructure visible.
by: Michael05/17/2023
I brought the hitch to my mechanic for installation, since it was rated as difficult. He couldn’t install it without removing the sensor/antenna unit behind the bumper. This was on a 2023 Honda CRV Hybrid.
Jenny N.
5/22/2023
For the hitches installed on a 2023 CR-V hybrid or non hybrid, the lift gate sensor have to be moved. Even when moved you may have a shortened area that it will function or may loose that function all together.
by: Tracy 09/23/2023
Great hitch, works perfectly. Great customer service too!
by: TJ in Nashville12/05/2020
A little challenging to install on my vehicle, but the instructions were good. Looks great.
by: Ken01/19/2024
2023 Honda CR-V
Excellent follow up to make sure you got the rignt delivery information.
by: Dirtfriend01/08/2022
2022 Honda CR-V
This hitch fit our 2022 Honda CRV EXL Hybrid. We are not planning on towing anything, it was installed for a hitch mounted bike rack for our ebikes. I did the installation myself and the video was helpful. Although, the hardest part for me was removing the rubber isolators from the exhaust pipe. Luckily on the Hybrid there were only 2 of them. I did the installation in my open garage on a 20 degree day and the rubber, being new and cold was super stiff. That first step took at least an hour. I did not have any help so lifting the hitch while bolting it was difficult. For the Hybrid, at least, a bit more cutting of the facia was necessary than the instructions indicated. After about three difficult hours it was done, and it looks great. Now to try the bike carrier. it works! The only disappointment was that the hitch sticks out a little further than the rack did on my 2008 Honda CRV, meaning when the rack is on I'll have to pull the vehicle in a bit farther into my garage, which is already tight. Oh, the first world problems! Great hitch, but if you do not have skills, which I do, plan on paying someone to install.
by: Andrew 07/07/2023
Just got it installed today. Looks fantastic, good to go!
by: Bill 05/24/2023
Quality of the unit and the complete and easy to follow instructions were great.
by: Lynn09/08/2022
Pictures in installation guide are useless, to dark to see, measurements have no start points indicted or not visible.
Otherwise hitch fits although scraped insulation off “just” wide enough. 1/4” narrower it wouldn’t clear the rear storage well, actually 1/8” narrower. Hitch arrived with a few bare metal spots (scrapes) had to be touched up. Otherwise good to go.
by: Edward 10/25/2020
I'm very pleased with the hitch I just installed. I'd never done something like this before and found the instructional video VERY helpful.
Shipping was FAST and unit arrived complete with all hardware.
I would recommend etrailer.com to all of my friends.
Ed P.
Ed P.
10/25/2021
Awesome product, we have used our new hitch for many applications - we bought it for a bike rake attachment but have found many other uses!
by: Andy E.03/11/2019
This hitch suits my purposes perfectly. (I use it to mount a Thule bike carrier.)
Andy E.
3/12/2020
Perfectly! Thanks for offering high-quality products and services.
by: Ted B08/19/2019
2018 Honda CR-V
I finally got around to installing the hitch I bought last year for my 2018 CR-V. etrailer's instructions and videos made it very easy. I did it by myself simply laying on the ground under the vehicle. It probably took me 2 hours, but saved the $650 dealer charge to install. If I was to do it again, I would definitely buy a set of exhaust hanger pliers ($15-$20). The hanger arms on my CR-V did not have a lip/?? to use a pry bar against as shown in the instructions. I probably spent half my time just getting the hangers off (2 rear plus middle one). The Curt hitch that hides the cross bar behind the bumper makes for a much nicer looking install. I am very pleased with my etrailer purchase and would highly recommend them to anyone looking for a hitch for their vehicle.
by: Joe 10/03/2020
2010 Toyota Prius
I am totally pleased with my purchase. Installed in about an hour. It fits like a glove and looks like a factory job. My second curt product. The first was for a 2010 Prius and it was also easy and I had no trouble with it whatsoever for the five years it was on the car,(NO RETIGHTENING of nuts etc.)
Joe S.
10/24/2021
Just great! It looks like it came with the car.Soooo easy to use
by: Joe03/26/2022
It works well and I've had no issued with it. Upon inspection out of the box, it looked like a well fabricated receiver hitch. A bit of a tough install but the instructions were good. I've only used it with my bike rack. The photo was taken a year later, no rust or paint chipping.
by: Michael 01/20/2021
2020 Honda CR-V
We just installed this on a 2020 CR-V Hybrid Touring edition. The hitch fit perfectly and looks great. All you see is the receiver portion. I had it installed professionally but mechanic said it was easy. Our CR-V has the kick to open tailgate feature. I ordered a Honda relocation kit for the sensor but mechanic said he couldn't make it work. Instead he just relocated the original sensor over to the driver's side which is possible since the hybrid doesn't have dual exhaust. Works fine. The hybrid is not rated for towing but we just wanted the hitch for our bike rack so I did not have the car wired for lights. Install took under 2 hours.
25
81
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Trailer Hitch For 2020 Honda CR-V That Is Compatible With Hands Free Lift Gate SensorI do have an option for you, but all of the 1-1/4" receivers for your 2020 Honda CR-V Hybrid all require the hands free lift sensor relocation kit from your local Honda dealer to be able to retain the use of your sensor. If you are dead set on the 1-1/4" receiver I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12169 and the relocation kit . The option I personally recommend is the etrailer Trailer Hitch Receiver # e98848 which does not require...
view full answer... - Will The Hands Free Sensor To Open The Trunk Work With A Trailer Hitch Receiver On A 2017 Honda CR-VThe Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12169 is confirmed to fit your 2017 Honda CR-V and will allow you to use the hands free sensor on either side of the rear bumper. The center sensor will be blocked by the hitch receiver opening, but just a few inches to either side of center will work fine. Unless you are looking for a small hitch, I recommend you go with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 instead. Unfortunately...
view full answer... - Comparing Curt Trailer Hitch Receivers For A 2024 Honda CR-VThere are a few distinct differences between the Curt Trailer Hitch Receiver # C13397 and # C12169. The # C13397 has a 2" receiver tube opening and has a matching capacity of 3,500lbs GTW, but higher TW capacity at 525lbs. The # C12169 has a 1-1/4" receiver tube opening and a lower TW capacity of 350lbs. The installation process for both hitches is the same and easy to do yourself if you consider yourself handy. If I had to choose between the two I would have to go with the # C13397 for...
view full answer... - Will the Curt Hitch C12169 for a 2018 Honda CR-V Affect Fuel EconomyThe Curt Trailer Hitch Receiver part # C12169 which is a fit for your 2018 Honda CR-V weighs around 25 lbs. In theory, the more weight you add to a vehicle, the less miles per gallon (MPG's) it will have but we are talking extremely small fractions here and you would by no means notice any drop in MPG's. The Draw-Tite Trailer Hitch Receiver part # 36597 which is also a fit for your 2018 Honda CR-V is a few lbs lighter but I would not let this alone be the basis for my choice as the affect...
view full answer... - Trailer Hitch that Fits 2019 and 2023 Honda CR-VThe Curt hitch part # C12169 fits both a 2023 Honda CR-V and a 2019 CR-V so it would well for both vehicles!
view full answer... - Recommended 1-1/4" Trailer Hitch Receiver For 2021 Honda CR-V Hybrid For Bike RackWe have just what you are looking for. The Curt Class II Trailer Hitch Receiver # C12169 is confirmed to fit your 2021 Honda CR-V Hybrid and has the 1-1/4" receiver you are looking for. This hitch has a 350lb tongue weight rating so it will be perfect for carrying your bike rack. If your CR-V has the hands free lift gate sensor you will need to purchase the relocation kit from your local Honda dealer, as this hitch will render the sensor inoperable. When we installed this hitch on a...
view full answer... - 2-Bike Platform Rack For Bike with FendersI recommend the Swagman Chinook # S64683. From photos I researched, it looks like the backup camera on your 2021 Honda CR-V EX-L is up and to the left of the license plate. If this is the case, you can manipulate the attachment of the bike so that the frame and pedals do not block the backup camera. I attached a photo of the Chinook at the bottom of this answer to see how it would avoid the camera. If you have an alternative frame, you can use the Swagman Deluxe Bike Frame Adapter Bar...
view full answer...
- How To Find an Installer For The Curt Trailer Hitch Receiver # C12169 on a 2024 Honda CR-V I have included a link near the bottom of the page which will help you find an installer for the Curt Trailer Hitch Receiver # C12169 on your 2024 Honda CR-V. The link will be near the instructions for the hitch and be sure to verify your correct ZIP code is entered as it could be different. I do recommend having them install the 4-Way # 118741 wiring when you install the receiver. This will be need should your hitch mounted accessory require Auxiliary Lights # C53201 or you need to connect...
view full answer... - Class II Trailer Hitch For 2019 Honda CR-V With Most Towing CapacityYes, the Class II trailer hitch for your 2019 Honda CR-V with the highest towing capacity is 3,500 lbs, though you do need to check your owner's manual to see what the capacity of your CR-V is. The hitch and other parts you need for your '19 CR-V are the following: - Curt Trailer Hitch Receiver # C12169 - T-One Vehicle Wiring Harness # 118741 - Curt Drawbar # C45521 - Pin and Clip # F-4 - 2" Hitch Ball # A-82
view full answer... - Parts Needed to Mount Camber 2 Bike Rack to 2020 Honda CRVYour referenced e98848 Class-3 hitch is a confirmed fit for a 2020 Honda CR-V. Your Thule # TH9058 Camber 2 bike rack will mount to either hitch with no additional parts needed. I have included a link below to an installation video on a CR-V. You may be able to do it yourself, as most of our customers do. If you do decide to have a neighborhood handyman or garage install this hitch I have provided a link to printable instructions you should give them. I prefer 2” hitches as there are...
view full answer... - Is there a 1-1/4" Trailer Hitch for a 2024 Honda CR-V?Yes, there is! To add a 1-1/4" hitch to your 2024 Honda CR-V, I recommend the Curt item # C12169. This hitch is custom fit and bolts to your Honda with included hardware. This hitch fits all models of the 2024 CR-V including the hybrid. The Curt item # C12169 is a class II hitch with a 1-1/4" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I really like this hitch because the crosstube mounts behind your rear bumper cover leaving only the 1-1/4" receiver...
view full answer...
- Does the Draw-Tite Hitch Fit a 2024 Honda CRV Hybrid Sport?Sorry Eric but that is a no. All of the Draw-Tite Hitch's like item # 36597 that fit the 2024 Honda CR-V specifically exclude the hybrid models. I checked with Draw-Tite to confirm this information. Instead, I recommend using the Curt Trailer Hitch item # C13397 which has been confirmed to fit the Hybrid Sport model of the 2024 CRV. This means there won't be any concerns with your batteries and it will be covered by Curt's warranty since they have approved it. The Curt item # C13397...
view full answer... - Will Curt Hitch Fit 2021 Honda CR-V Hybrid ModelYes, both the Class II Curt # C12169 and the Class III Curt # C13397 will fit your 2021 Honda CR-V Hybrid. Out of both options I recommend going with the Class III # C13397 because the larger receiver size means you'll have more options when it comes to what accessories will fit. I am attaching an installation video and a photo of this installed on a 2021 CR-V non-Hybrid so you can get a general idea of what the install will look like (installation on the Hybrid may look a little different). If...
view full answer...
- Fit of Curt C12169 Class II Hitch on 2017 Honda CR-V with Hands-Free Liftgate OptionThe hitch is indeed a fit for your vehicle. We've had several reports that the sensor was almost completely unaffected and others that said it won't work at all once the hitch was installed, and some who have said that the feature isn't affected if you wave your foot a few inches to either side of the receiver tube. Honda does offer a kit available through the dealer as part # 08U59-TLA-100A that will allow the sensor to be relocated.
view full answer... - Will Hitch From 2019 Honda CR-V Fit a 2022 Honda CR-VWe do have the etrailer Hitch # e98848 and Curt Hitches # C13397 and # C12169 which fit all 2019 and 2022 Honda CR-V models so if you have one of these hitches then you'll be good to go. If you have a different hitch that we carry just let me know and I can see if we can verify it for you. Please note that when installing a trailer hitch you need to have new hardware. If you are taking this off of a 2019 CR-V then you'll want new hardware found as part # RHK that you need to order to install...
view full answer... - Recommendations for Carrying 2 Inch Bike Rack in 1-1/4 Inch Hitch on 2021 Honda CR-VYou could use a hitch adapter like # HTAD which would allow you to install the bike rack designed for a 2 inch hitch in your existing 1-1/4 inch hitch, but there are a couple reasons why that isn't the greatest idea. • Thule does NOT recommend using hitch adapters for their bike racks. Installing an additional component between the hitch and the bike rack like an adapter will cause the rack to bounce and rattle more than it would if it were installed directly into the hitch. This...
view full answer... - Is The Curt Trailer Hitch Receiver Confirmed to Fit The Redesigned 2023 Honda CR-V?The Curt Trailer Hitch Receiver # C12169 and the # C13397 have both been confirmed by Curt to fit the new 2023 Honda CR-V. This is most likely due to while they have updated the interior and exterior of the 2023 model year it is likely on the same chassis as the previous generation.
view full answer... - Installation Video for etrailer.com Trailer Hitch Receiver on 2018 Honda CR-VThe etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # E98848 for your Honda CR-V does not have a video yet. However, the installation is identical to the Curt Trailer Hitch Receiver # C12169 so I've attached that video to assist.
view full answer... - Recommended Class II Hitch with 1-1/4 Inch Receiver for 2021 Honda CR-V HybridThe only available 1-1/4" receiver Class II hitch for the 2021 Honda CR-V Hybrid currently is the Curt # C12169, but it's a great choice because of the durable powder coating that Curt uses on their hitches. If you don't already have a bike rack for your e-bikes, the Thule T2 Pro XTR Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount # TH23JV will fit in a 1-1/4" receiver and can carry bikes up to 50-lbs each. I've linked a review and installation video of this hitch for you to check...
view full answer... - Fascia Trimming for the etrailer Hitch on a 2020 Honda CR-VEvery hitch available for your 2020 Honda CR-V hybrid requires trimming a small rectangle out of the lower fascia. I have attached a picture below that I took directly from the instructions for the etrailer Hitch item # e98848. This will show you exactly what needs to be trimmed. I have also linked a video we did on a 2020 that will show you all of the installation steps. There is a 1-1/4" hitch for your CR-V hybrid. It is the Curt Trailer Hitch item # C12169. The same piece will have...
view full answer...
- Trailer Hitch that Fits 2023 Honda CR-V HybridFor your 2023 Honda CR-V Hybrid we have the Curt hitch part # C12169 as a confirmed fit which would work great.
view full answer... - Trailer Hitch Fit for 2022 Honda CR-V Touring HybridAccording to Curt, neither the # C13397 or the # C12169 is a fit for Hybrid Touring Honda CRV models after the 2020 model year, but our installers have successfully installed it on such a vehicle, and we've received customer reviews confirming that the hitch works with the Touring Hybrid. Originally, the hitch didn't work with the hands-free liftgate feature, but Curt has redesigned the hitch so it's compatible. All stock we have on hand is the redesigned hitch. Our installers haven't...
view full answer... - Which Curt Trailer Hitch Receiver Fits a 2021 Honda CR-V Hybrid?For your 2021 Honda CR-V Hybrid you will need to go with the Curt Trailer Hitch Receiver # C13397 if you are wanting a 2" receiver, or the # C12169 if you are wanting a 1-1/4" receiver. I recommend going with the 2" receiver version due to it having the most options when it comes to accessories like bike racks, cargo carriers, or even balls mounts to tow a trailer. If you can tell me what you will be using your hitch for I would be happy to recommend the best products for your needs.
view full answer... - 1-1/4" Trailer Hitch Receiver and Wiring Harness Compatible With a 2022 Honda CR-V Hybrid EX-LYes, the Curt Trailer Hitch Receiver # C12169 has a 1-1/4" receiver for your bike rack. This is confirmed to fit all models of your 2022 Honda CR-V except the Touring trim levels. I believe this is the same one you found as it does say excluding Hybrid & Touring along with Hybrid for your CR-V. I can assure you it will fit your Hybrid CR-V EX-L trim level. The installation video that I have linked below does show it being installed on a 2021 CR-V Hybrid so you can see what all is involved...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Michael B
Video by:
Thomas T
Video by:
Rick G
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Eric H
Written by:
Amanda M
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul M.
4/25/2020
Its a great hitch and I used it quite a lot for towing my trailer. I recently traded that car and ordered another hitch from you for my new car and it just arrived yesterday. I will be installing it tomorrow. Looks to be another great product. Cant wait.