Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(14 reviews)
Price: $171.93
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11499
Retail:$280.95
Our Price: $171.93
You Save: $109.02
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (14)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11499
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Concealed Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11499 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2012 Infiniti G25 Sedan
- 2007 - 2008 Infiniti G35 Sedan
- 2009 - 2013 Infiniti G37 Sedan
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11499
Average Customer Rating: 4.6 out of 5 stars (14 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Ethan 09/30/2023
Infiniti G37
This worked very well for us. We were moving from California to Tennessee. This fit well and pulled great. Our G37 pulled a 4x8 trailer filled with a BMW RS 1200 and a motor and a bunch of other items. It pulled across country like there was nothing there. Thanks.
by: Michael11/04/2022
2009 Infiniti G37
Was able to install in one hour. Fits perfect and feels solid. All required hardware provided. Be sure to find the install video for your car or truck. The installation video was super helpful and well done.
This is perfect for my bike rack and light duty towing.
by: Mark06/17/2018
Infiniti G37
2013 G37 Journey: Installed just like the instructions stated with one exception in my case. The four bolts that hold the hitch plate to the bumper are not long enough to attach the hitch AND the Infiniti aluminum bumper fascia spacer. I didn't see a problem not using this spacer, it's not structural. The eTrailer installation video for similar G37 hitches do not use the fascia spacer either. I haven't used the hitch yet, but it sure seems like a strong installation! About 2.5 hours total, no special tools, pretty straightforward installation, nice results!
by: Nathan07/20/2023
I found an item just purchased for $[XX] less on [online vendor] and they would not match the price for the exact same part. That is NOT GOOD customer Service. I’m going to return the item and get a refund. BAD Policy!! Not smart
by: Cristobol07/17/2021
This hitch was simple to install, with the exception of my rusted bolts under the car, but I can't blame the hitch on that! We have been using this on our 2007 Infiniti g35x for hauling a small trailer. It works great for this type of use, but is not suitable for bike racks or cargo racks as the part the hitch attaches to on the car will bend. I would imagine this is mainly a limitation to the frame mount options of this specific car.
by: Mikepro07/02/2007
Infiniti G35
Nice option for the vehicle!Fits nicely on the G35. Installation is not too bad. You do need to do some trimming of the bumper and underbody plastic cover. but, none of the trimming is visible from the back of the vehicle. It can only be seen if you stick your head under the bumper. My only complaint would be that the supplied flange nut and square tow loop spacer bar would come painted black. As shiny metal, the kind of stand out when installed. Spray paint them black, and they are virtually invisible.
by: Ian04/15/2019
A solid, quality unit that installed quite easily. One issue that I have is that it requires the use of the existing hardware to attach the main plate. The bolts, in my opinion are not long enough. With the added washers supplied, there is minimal thread engagement. I opted to go with 35mm long bolts for full engagement. Out side of this I would recommend the product.
by: GG09/11/2020
2010 Infiniti G37
Product is well built and solid. I plan on buying more products from eTrailer.
by: Stanfa03/27/2008
sweet!!!I agree with everything the previos poster said. I painted my nut & washer black...you don't even notice it now!
by: Kimberly06/07/2022
2012 Infiniti G25
Came earlier than expected; very high quality craftsmanship
by: Grant 01/29/2022
Perfect for my car!
by: Judy C08/04/2021
Customer Service is excellent!
by: William 09/10/2020
Fast shipping. Perfect fit.
by: Sieve08/25/2022
14
14
See what our Experts say about this CURT Trailer Hitch
- Is There a 2 Inch Trailer Hitch Option for a 2009 Infinity G37xYour 2009 Infinity G37x only has the 1-1/4 inch trailer hitch option from our manufacturers due to the restricted capacity of your vehicle. I recommend using the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11499 and have attached a video of the installation to assist. The only way to get 2 inch accessories to work on this hitch is to use the hitch adapter # HTAD or # HT5R. The use of an adapter like this will reduce the tongue weight rating of your hitch (200 lbs)...
view full answer... - Trailer Hitch Recommendation for a 2013 Infiniti G37 SedanThe only trailer hitches available for your 2013 Infiniti G37 are Class I hitches like the Curt hitch part # C11499. Class III hitches are generally reserved for larger vehicles with higher capacities like trucks and SUVs.
view full answer... - Receiver Location for a CURT Trailer Hitch on a 2010 Infiniti G37I have included a link to the installation instructions for the CURT Trailer Hitch, # 11499, for your 2010 Infiniti G37. The hitch touching the vehicle is not really an issue because you will actually have to trim some of the rear fascia to allow the hitch to fit as noted in the instructions. The warning you are referring to for non-trailer loads is only on certain CURT hitches. More specifically, it is referring to all CURT Class I, Class II, and some Class III trailer hitches. This is...
view full answer... - Hitch, Wiring and Other Components for a 2009 Infiniti G37X to Tow Trailer of 1850-lbs Gross WeightThe only size and Class hitch offered for your 2009 Infiniti G37X is a light-duty 1-1/4-inch Class I hitch, and we offer two. The correct fit for your G37 will depend on the version of the G37 that you have, coupe or sedan.(We don't have one for the convertible as of 10/2023). If you have the coupe, you will use the # C11493, or the # C11499 for the sedan. I have linked our main page for hitches where you can use the drop-down menu at the top of the page to select your vehicle style and...
view full answer... - Hitch Recommendation for a 2008 Inifiniti G37The Curt # C11499 that you referenced is designed to fit newer versions of the Infiniti G37 so I cannot recommend it for your 2008 model. If for example you have a 2010 G37 this hitch would fit. The only hitch that we have that in confirmed to fit your vehicle is the Curt # C11493 that has been confirmed as a fit as long as you have a coupe. The fit info for the hitch also states that trimming of the fascia will be required. For a ball mount you would then want the part # C45521, for...
view full answer... - Is There Cutting of Fascia Required to Install Curt Class I Hitch on 2007 G35XYes, cutting of the fascia is required for installation of Curt Class I Trailer Hitch, part # C11499, on your 2007 G35X. You will drill two holes under the license plate to install the part # C11499. These holes are cut to get access to lower bolts in fascia. The license plate will cover up the holes cut when re-installed. You will also need to cut a small square from the fascia on the bottom of the fascia to make room for the hitch to fit. This is underneath and not seen. Check out...
view full answer... - How Much Weight Can a 2010 Infiniti G37 Carry on the Curt Hitch # C11499You are correct in that the Curt Class I Trailer Hitch Receiver, # C11499, for the 2010 Infiniti G37 will have a max limit of 200 lbs of weight that you can carry on a cargo carrier. When looking at a cargo carrier you will need to factor in the weight of the carrier as well as the cargo when mounted in the Curt hitch. A cargo carrier like the Curt Cargo Carrier, # C18145, will fit the Curt hitch and has a weight of 29 lbs. So with this carrier you would be able to carry a max weight...
view full answer... - Bike Rack Recommendation for a 2009 Infiniti G37 CoupeI do have a solution for carrying bikes on your 2009 Infinity G37 coupe, but a trailer hitch option is not available for the coupe model. What you can do instead is use a trunk mount bike rack. We have several options that will fit your G37 coupe and I have included a link to them for you. Out of the three options, the Thule Gateway Pro 2, # TH88VR, is the most popular option. For any trunk mount bike rack, if you will be carrying women's, children's, or alternative frame bikes, I recommend...
view full answer... - Hitch Recommendation for a Infinity G37XI attached a link to a page that has all of the hitches that are confirmed to fit your 2009 Infiniti G37x. They are all Class I hitches. The # C11499 is a confirmed fit for your G37x and work very well for you. You will just need to stay under the capacity for the hitch and be sure not to carry a bike rack with more than 2 bikes on it. I attached an install video for this hitch for you to check out also. You will also need the stabilizer strap # 18050 when using this hitch with bike...
view full answer... - Recommended Trailer Hitch and Bike Rack for a 2009 Infiniti G37There are 3 different trailer hitch options that will fit your 2009 Infiniti G37 and it all depends on what model you have: Sedan - # C11499 Coupe - # C11493 Convertible - # C11068 Please note that Curt says you need to use the stabilizer strap # 18050 for any non-trailer loads like a bike rack. If you don't already have a bike rack then I highly recommend using the Kuat Beta # B202-114 because it gives you a great bike rack at a great price. This bike rack has an aluminum frame which...
view full answer... - Parts Needed to Tow With 2012 Infiniti G37X SedanYou can tow a trailer with your 2012 Infiniti G37 sedan, you just need to make sure you stay under the capacity that Infiniti sets for this vehicle. To find this out you'll need to contact Infiniti as there was no official capacity listed in the owner's manual I looked up online. The parts you need to tow with your 2012 Infiniti G37 sedan are the following: Curt Trailer Hitch Receiver # C11499 T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480 Curt Class II Drawbar...
view full answer... - Best Way To Carry 3 Bikes On A 2013 Infiniti G37You can certainly use the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway part # TH934XTR on your 2013 Infiniti G37, however, as the vehicle only has a Class I 1-1/4" hitch receiver option, you will only be able to carry two bikes on this rack. As this bike rack weighs roughly 40 lbs and the hitch receiver has a maximum tongue weight capacity of 200 lbs, each bike must weigh under 40 lbs in order for this option to work. Class I hitches can only carry 2 bikes even if the...
view full answer... - Are Longer Bolts Needed When Installing Curt on 2012 Infiniti G25We've received a few reviews on the Curt hitch part # C11499 where it was noted that the included bolts were a little short so going with 35 mm bolts sourced locally instead was needed. The bolt size this comes with is 1/2-13 x 1 3/4.
view full answer... - Stabilizing Strap For Non-Trailer Loads Carried by 2009 Infiniti G37The Curt Class I hitches, like the # C11499 which is a fit for your 2009 G37 do include the caveat in the installation instructions that a stabilizing strap is required in order to maintain warranty coverage. The warranty stipulates that a stabilizing strap like part # 18050 should be used for all non-trailer loads like bike racks or cargo trays. One end of the strap would loop around the hitch accessory, the hooked end would attach to the vehicle using the edge of the trunk lid or hatch. I...
view full answer... - Trailer Hitch Recommendation for a 2013 Infiniti G37XWhether or not you will need a draw bar (ball mount) depends on what you will be using the hitch for on your 2013 Infiniti G37X. By the way that is a super-cool car but I may be biased since I have a 2008 G37S! If you will be using the hitch for a bike rack or cargo carrier, then you would not need the draw bar. But for towing it is essential. For the Curt hitches, the hitch for the sedan models, # C11499, uses ball mount # C45521 and pin and clip # F-4. You would then add a ball to...
view full answer... - Does Trailer Hitch for 2011 Infiniti G25 Have Capacity for Towing Small TrailerThe Curt hitch part # C11499 that fits your 2011 Infiniti G25 does have the capacity to tow a trailer that weighs up to 2,000 lbs so what you mentioned would be fine to tow the trailer you mentioned. You should also verify the towing capacity of your vehicle in the owners manual. You'd also need trailer wiring like the part # C56033, a ball mount # C45521, a hitch ball like part # A-82 for a 2 inch hitch ball or # A-80 for a 1-7/8 inch hitch balls, and a hitch pin part # F-4.
view full answer... - 2008 Infiniti G35 Sedan Trailer HitchThe Curt Class I Trailer Hitch Receiver, part # C11499, is a confirmed fit for your 2008 Infiniti G35 Sedan and is a great choice for you. It has a 1-1/4 inch receiver opening, 2,000 pound weight capacity, and does include the drawbar, pin and clip. I attached an installation video of this hitch on a 2008 Infiniti G35 Sedan for you to check out.
view full answer... - Recommended Towing Components for 2012 Infiniti G37XFor your 2012 Infiniti G37X, the Curt Trailer Hitch Receiver - Class I # C11499 is a confirmed fit. Then you can use the ball mount # C45521 and pin # F-4. You can then use hitch ball # A-80 for a 1-7/8 inch hitch ball or # A-82 for a 2 inch ball. For your trailer wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56033. This will install to the harness located behind the driver's-side and passenger's-side interior trim panels in your...
view full answer... - How To Make A 1-1/4 Inch Hitch On A 2011 Infinit G25 To A 2 Inch HitchWhen it comes to making your 1-1/4 inch hitch to 2 inch hitch on your 2011 Infiniti G25 The Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD will adapt your 1-1/4 inch hitch to a 2 inch hitch. This adapter has a 300 pound weight capacity. It has a powder coated black finish that resists rust and corrosion. I attached a review video link below.
view full answer... - Bike Rack Recommendation for 2012 Infiniti G37A hitch bike rack is a great option to carry up to 2 bikes on your 2012 Infiniti G37. One of my favorite hitch mount bike racks and the one that I recommend for you is the Hollywood Racks Trail Rider 2-Bike Rack # HR200Z. The Trail Rider can carry 2 bikes with maximum wheel bases of 60 inches, tires up to 3 inches, and up to 45 pounds per bike. This hitch mount platform bike rack will fit both 1-1/4 inch, Class I and Class II hitches, as well as 2 inch trailer hitches. To help the bike...
view full answer... - 2012-2013 Infiniti G37 Sedan Hitch and Bike Rack RecommendationFor your 2012-2013 Infiniti G37 Sedan the Curt hitch part # C11499 that you referenced would be the hitch that you need. I attached an install video for you to check out as well. The best type of bike rack for beach cruiser bikes is going to be a platform style rack. There are many that fit in a Class I trailer hitch but because of the weight of most beach cruisers, I recommend going with the Swagman Chinook # S64683, rated for 45 pounds per bike. The bike wheels will be held in the...
view full answer... - Recommended Trailer Hitch And Hitch-Mounted Platform Bike Carrier For 2013 Infiniti G37 SedanThe CurtTrailer Hitch, part # C11499 will work great on your 2013 Infiniti G37. When installed it has a distance of 2-1/2 inches from the center of the hitch pin hole to the rear edge of the bumper. The Thule T2 Classic 2 Bike Rack, part # TH9045 that you asked about has a distance of 3-1/2 inches from the center of the hitch pin hole to the closest part of the carrier so I would be cautious with recommending it for you. I do have a solution though. I recommend the Thule T2 Pro 2 Bike...
view full answer... - Is The Trimmed Portion of the Fascia Visible When Installing a Trailer Hitch on a 2010 G37xS SedanThe part of the fascia that needs to be trimmed will be on the under side of the fascia on the 2010 G37 Sedan. To see the area that will be trimmed you would need to look up from underneath of the vehicle. All of the hitches available for the G37 require trimming a rectangle in the center of the lower bumper fascia. At this time I do not have a better option for carrying bikes on your vehicle.
view full answer... - Hitch, Bike Rack, and Cargo Carrier Recommendation for a 2009 Infiniti G37 SedanThis Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11499 is the correct hitch for your 2009 Infiniti G37 Sedan. For a cargo carrier that would do well to carry your 80 lb generator I would recommend the Curt Cargo Carrier part # C18145. Check out the review video I attached to the right for more info. For a bike rack I would recommend the Swagman XTC2 Bike Rack part # S64670. This is a great 2 bike rack that would do well to carry your 2 bikes that has a ton of positive...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane H
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Zach D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.