Does Trailer Hitch for 2011 Infiniti G25 Have Capacity for Towing Small Trailer
Question:
I’m trying to buy a small trailer to carry a water tank for auto detailing, it will only have about 30 gallons of water, would the hitch support that weight on my infiniti G25 journey
asked by: Kevin C
Expert Reply:
The Curt hitch part # C11499 that fits your 2011 Infiniti G25 does have the capacity to tow a trailer that weighs up to 2,000 lbs so what you mentioned would be fine to tow the trailer you mentioned. You should also verify the towing capacity of your vehicle in the owners manual. You'd also need trailer wiring like the part # C56033, a ball mount # C45521, a hitch ball like part # A-82 for a 2 inch hitch ball or # A-80 for a 1-7/8 inch hitch balls, and a hitch pin part # F-4.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: 2012-2013 Infiniti G37 Sedan Hitch and Bike Rack Recommendation
- Q&A: Aluminum Fascia Support on 2009 Infiniti G37 is Welded On and Cant Install Trailer Hitch
- Q&A: Hitch Recommendation for a Infinity G37X
- Q&A: Does Bumper Fascia Spacer Need to Be Reinstalled on 2013 Infiniti G37 When Installing Curt Hitch
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Are Longer Bolts Needed When Installing Curt on 2012 Infiniti G25
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Hub/Drums and Brake Assemblies for Trailer with 5,200 lb Axle
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Fat Bikes
- Article: Trailer Hitch Receiver Sizes
- Article: Best Bike Racks for Electric Bikes