Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(60 reviews)
Price: $216.00
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11349
Retail:$335.61
Our Price: $216.00
You Save: $119.61
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (60)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11349
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11349 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2020 - 2023 Nissan Sentra excluding SR models
- 2013 - 2019 Nissan Sentra S, SL, and SV
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Too difficult to install
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11349
Average Customer Rating: 4.8 out of 5 stars (60 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Bobbie 05/03/2024
Nissan Sentra
Ordered this a year ago to haul dirt bikes with my nissan sentra amazing quality!
by: John03/27/2021
I bought this hitch to carry bikes with our Nissan Sentra. Little did I know at the time just how much more useful it would turn out to be! We don’t have a truck or SUV, and so I have used this hitch to pull a small trailer several times to transport items that just won’t fit in the car. My only complaint is that it sits so low and can bottom out easily if I’m not careful (however, this it the fault of the car sitting so low, not the hitch). Overall, I am completely satisfied with this hitch and would highly recommend it! I also had great service from etrailer and will definitely continue to purchase from them!
*A note about ease of installation: I didn’t have many tools when I installed it as we had just moved back to the US from overseas and my tools hadn’t arrived yet. I was able to install it with a multi tool and an adjustable wrench. (I did tighten it down with a ratchet before using it to carry a load.)
by: Matthew 05/30/2023
Once again, Etrailer under promises and over delivers
Hitch arrived a day early in perfect condition
Used online instructions because pics were better
Very straightforward-took about an hour using hand tools
by: Mark05/10/2019
2015 Nissan Altima
Instructions were great, packaging was great, I was excited about the challenge of putting the hitch on by myself. Other than widening the hole, everything went smooth....looks great. I will be a regular customer.....very satisfied
by: Alfonso 04/19/2023
The installation was easy and the instructions were very good
by: Mathieu C04/09/2020
Facile à installer, environ 45min seul
Translation: Easy to install, about 45min alone
by: Andre F.11/15/2016
2016 Nissan Sentra
Installation was relatively simple except enlargement for 1/2" hardware was larger than diagram indicated. The "flange" for anchoring the trailer hitch to the tie-down loop on the 2016 Nissan Sentra could have been a little longer. While torqueing the 1/2" bolt the socket was unable to sit squarely on the nut which made attaining the 110 ft-lb of torque difficult. Other than that, the installation went relatively smooth.
by: Mike R03/20/2020
2015 Nissan Sentra
The hitch is working as expected I put it on my 2015 Nissan Sentra S R. Even though the directions said it wouldn’t fit my car I made it fit with a very small alteration of my tailpipe. Great part I highly recommend it. I put my bike rack on it and transport my mountain bike. It is rock solid!!
Mike R.
3/21/2021
Still working flawlessly after 2 years.
by: Andre 08/17/2020
2019 Nissan Sentra
This is the second one of these I have purchased. The first was for a 2016 Nissan Sentra that was totaled. This one is for a 2019 Sentra. It's a good trailer hitch.
Andre F.
8/18/2021
It allows me to haul my bike around. It works great.
by: Pablo07/07/2019
2018 Nissan Sentra
Took me 2 hrs taking it easy by myself to install on my sentra.i like it and its barely noticeable.
by: John 08/12/2023
2013 Nissan Sentra
Works great! Thank you
by: Tk07/18/2022
After finally having time to install my hitch on my nissan sentra. Everything went together smoothly during installation. As of now it is a solid product. The only issue I had was the attachment on the hitch tht lines up with my towing hook needed to be flatter I wasn't able to get the nut on the bolt. A small modification was all I meeded without compromising the integrity of the frame. over I am satisfied.
by: Rocco08/03/2022
2014 Nissan Sentra
I wanted to purchase the correct trailer hitch for my car. I talked to a rep from etrailer and she advised me on which one to purchase. A couple days after I ordered it, I received a returned email from etrailer that I sent before I ever talked to a rep, and he said they don’t make one for my car model. I called them immediately and they verified I was issued incorrect information about the hitch fitting my car. The hitch was delivered on the same day I talked to etrailer. They were amazing, the next morning I had a label sent to me via email and I dropped it off at UPS. They were very apologetic, from everyone I talked to, and their actions spoke loader then words. Their customer service is five star!!!. I will do business with them, for sure, again!!
by: Mark 08/03/2023
IT FITS WELL AND LOOKS LIKE A QUALITY P ART.
by: James10/29/2020
2014 Nissan Sentra
Easy to install! Perfect fit. Sits lower than expected but it is solid!
by: Ernest04/24/2019
2018 Nissan Sentra
The order arrived extremely quickly. In two days it was at the front door. It wasn't as easy to install as some of the other reviewers led me to believe. One reason I chose it was the claim of no drilling. I would have much rather drill a hole or two than expand an existing hole to twice its size. I agree with one of the other reviewers that access to the bolts behind the bumper trim was close to impossible. The instructions included in the package were a copy of a copy and left a lot to be desired when it came to seeing detail. The ones on the web page were excellent quality, but seeing the applicability of "2013 Sentra" on the top is a little worrisome when you are installing on a 2017. Working alone, it took me a while, but the final product is great. Using a hydraulic lift directly under the receiver worked like a charm to get it in position.
by: Gertrudis06/05/2020
Product was easy to install and sturdy. Instructions were clear and helpful.
This will safely hold an athlete’s bicycle rack for long distance travel.
I highly recommend etrailer.com, service,
and the quality of this product.
by: Kevin08/31/2018
2017 Nissan Sentra
Good fit and profile, but passenger side bolts are near impossible to get tight without removing the bumper completely. Have not used it yet but so far so good. We are going to use it for a bike rack.
by: Will F09/25/2019
2013 Nissan Sentra
Just installed a Curt trailer hitch from etrailer, on a 2013 Nissan Sentra , and it fit like a glove - Thank you to Greg of etrailer for helping with the particulars
by: Mikel09/04/2021
Have been more than happy with the hitch. Works great for us hauling or bikes.
by: Kennedy05/19/2022
I had a great time ordering this, and when I needed swifter delivery for moving I was able to talk with Joshua and get payments settled easily. He even gave me a line number to get directed back to him if I needed to call again. Followed up with an email on product info upon delivery. Love this website. Will follow up review upon installation.
by: Jose G02/28/2017
2015 Nissan Sentra
Simple installation on our 2015 nissan sentra was excited so i installed it late after work holes on car where a bit small made them larger and with in an hour i mouted my siris cycle pro bike platform. Thank you etrailer.
by: Donicã©07/11/2020
I can’t rate the pull or torque, as I haven’t tried it yet. But the hitch came promptly and quickly. My son added the hitch to my 2013 Nissan Sentra without any problem. I recommend consumers who add the hitch themselves have a drill bit for metal before adding the hitch.
by: Doug N.08/21/2017
2017 Nissan Sentra
Fast shipping. Sturdy hitch. Took about 45 minutes to install by myself. You can see the bracket and bolt on the tow hook so I shot it with a little flat black paint. Looks great. Should pull my jetski no problem.
25
60
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch That Fits 2013 Nissan Sentra SVYes, the Curt Trailer Hitch # C11349 is absolutely compatible and will fit your 2013 Nissan Sentra SV. This is a Class I hitch with a 1-1/4 inch receiver and is a complete bolt-on installation, which is great for your car because it does not require any drilling to install. For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 118582. The correct ball mount for this trailer hitch is the Curt # C45521 which requires Pin...
view full answer... - Recommended Trailer Hitch Receiver And Platform Bike Rack For 2015 Nissan SentraYes, The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11349 will fit your vehicle. However, you may want to consider the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24907 which is also a confirmed fit because it does not require the stabilization strap # 18050 that the Curt trailer hitch receiver requires when using an accessory like a bike rack. Drilling is required for the Draw-Tite hitch receiver, and access holes need to be enlarged...
view full answer... - Why Doesn't Draw Tite Hitch # 24907 Fit 2015 Nissan Sentra SRBoth the Draw-Tite Sportframe Trailer Hitch Receiver # 24907 and the Curt # C11349 exclude the SR model. I reached out my contact at Curt and found out that the reason they are excluded is because of excess trim and an exhaust rattle. They don't have anything in the works for a compatible hitch. The modifications to make it work would include trimming portions of your fascia and doing some exhaust modification. If you are willing to do some customization, my contact said you can make it...
view full answer... - Does Curt Hitch for 2014 Nissan Sentra Come with WiringThe Curt Trailer Hitch # C11349 does not come with wiring for your 2014 Nissan Sentra SV but if you are needing wiring you'll just need the Curt # C56205. To complete your towing setup you'll also need the Curt Ball Mount # C45521 with the Pin & Clip # F-4 and either a 1-7/8" # A-80 or 2" # A-82 hitch ball. We haven't had the chance to install any of these parts yet but I'm linking the instructions for you to check out.
view full answer... - Recommended Hitch for a 2015 Nissan Sentra SVThe best hitch for your 2015 Nissan Sentra SV is going to be the Curt Trailer Hitch item # C11349. This hitch is custom fit and bolts to your Nissan with included hardware. I checked with Curt and confirmed that this hitch does fit the SV models. The Curt Trailer Hitch item # C11349 is a class I hitch with a 1-1/4" receiver. It is our highest rated hitch for your car and it has a 2,000 lbs towing capacity and a 200 lbs tongue weight. I have attached a picture below along with the instructions...
view full answer...
- 2022 Nissan Sentra S Trailer Hitch and Wiring RecommendationsTo install a trailer hitch and wiring on your 2022 Nissan Sentra S I recommend the following: - Curt Trailer Hitch Receiver # C11349 - T-One Vehicle Wiring Harness # 118582 The 2" receivers are definitely better since they work with more accessories, but unfortunately at this time (September 2023) there are only Class I hitches with the 1-1/4" receiver available for your vehicle. If you plan on doing some towing with this setup I've linked our helpful article on choosing a ball mount...
view full answer... - Highest Capacity Trailer Hitch Receiver for 2017 Nissan SentraThe highest capacity trailer hitch receiver for a 2017 Nissan Sentra is 2,000 lbs towing and 200 lbs tongue weight (please keep in mind there are no fits for a Sentra SR) the Draw-Tite Trailer Hitch Receiver # 24907 and Curt Trailer Hitch Receiver # C11349. You mentioned 103 kg (227 lbs) and neither of these hitches will be able to utilize a motorcycle and carrier with that much weight, and there isn't a hitch available for your Sentra that will allow you to use a carrier. The only option...
view full answer... - Do Trailer Hitches for 2018 Nissan Sentra Require DrillingFor your 2018 Nissan Sentra all of the hitches we offer do require some drilling like the Curt hitch part # C11349 you mentioned. If the goal is to carry a bike rack you might look into a trunk rack option as that does not require a hitch. The Yakima FullBack part # Y02634 is a confirmed fit and would work well. Check out the review video I attached for more info as well.
view full answer... - Ball Mount on 2015 Nissan Sentra is too ShortIt looks like you have installed the Curt Trailer Hitch Receiver, # C11349 and the Draw-Tite Drawbar for 1-1/4" Hitch, # 3593 which is only 6-5/8" long (2-1/8" rise, 2-3/4" drop). If you want something with a similar drop/rise, I suggest the Draw-Tite Drawbar for 1-1/4" Hitch, # 3592 this has a 2-1/8" rise with 2-3/4" drop but is 9-3/4" long. In addition to the product review video for the suggested ball mount, I linked a couple of help articles that Ihope you to find of value.
view full answer... - Can a Thule 4-Bike Carrier Fit a Class I Trailer Hitch on a 2014 Nissan SentraOn your 2014 Nissan Sentra, you can use a Thule bike rack that fits 1-1/4 inch hitches such as # 24907 but you will be limited to 2 bikes, even if the rack can hold more. The issue is that all of the trailer hitches for your Sentra are Class I hitches. Bike rack and hitch manufacturers agree that on a Class I hitch you are limited to 2 bikes. To carry up to 3 bikes you can use a trunk mount rack. I have included a link to the right to all of the 3-bike trunk mount racks listed as a fit...
view full answer... - Height of Curt Trailer Hitch C11349 For 2016 Nissan SentraDefinitely can help you out here and the height from the ground to the top of the receiver on your 2016 Nissan Sentra will be approximately 10 inches for the Curt hitch you asked about, which is the following part number: - Curt Trailer Hitch Receiver # C11349 The actual height should be very close to that once you install the hitch, but could vary based on a number of factors, like tire pressure or size, etc. So I do recommend installing the hitch first and measuring it and the coupler...
view full answer... - Roof Rack, Basket, Bag and E-Bike Rack for 2018 Nissan SentraThe Rhino Rack roof rack part numbers # RRVA118B-2, # RRRLKVA, and # DK369 that you referenced is a confirmed fit for your 2018 Nissan Sentra and is a really solid roof rack choice. The roof basket part # RRRMCB03 and cargo bag part # RRLB200 would then work well together. For carrying an e-bike on a roof you may find that's it's a bit difficult to get the heavier bike up that high so a hitch mounted bike rack solution like the Thule EasyFold XT part # TH903202 might be an easier solution. If...
view full answer... - Hitch for Carrying Mobility Scooter With 2018 Nissan SentraYears ago, hitches were available that would clamp onto the bumper of a vehicle. Those pretty much went out of vogue once vehicles stopped using steel bumpers, so we don't currently carry anything like that. What's used now are frame mounted hitches that would bolt into the underside of the frame member just forward of the rear bumper, like the Draw-Tite # 24907 Class I hitch. The hitch would work well with your Sentra SV, but the hitch has a tongue weight capacity (maximum amount of downward...
view full answer... - Possible To Tow U-Haul Cargo Trailer 4x8 Or 5x8 On 2013 Sentra SV?Hi, For your 2013 Nissan Sentra SV I would use the Curt trailer hitch receiver custom fit # C11349 it does not require any drilling holes in the frame of your car. Just needs one hole made wider. You will also need a ball mount like the Curt Class II drawbar # C45521 and ball like the Curt 2" Hitch Ball # 40038 and a wire harness like the Curt T-Connector Vehicle Wiring Harness with 4-pole flat trailer connector # C56205. The two hitches we do carry offer the same towing capability, you...
view full answer... - Installation of a Trailer Hitch on 2016 Nissan Sentra SLA trailer hitch is a great option for your 2016 Nissan Sentra if you are worried about mounting a clamp-on roof rack. As for the installation, neither process is going to be overwhelming as long as you are comfortable with a drill and torque wrench. The biggest difference is that the Curt # C11349 will require you to temporarily remove your rear fascia, though you won't have to drill your own mounting holes like you do with the Draw-Tite # 24907. I've attached links to the installation...
view full answer... - Recommended Trailer Hitch For A 2015 Nissan Sentra SVThe Curt Class 1 hitch # C11349 will fit your 2015 Nissan Sentra with the SV package perfectly. The only options it will not fit are the SR, SR Turbo and Nismo packages. This is due to some styling differences causing issues, but the SV package does not include said styling differences so you are good to go. Just as a side note, if you plan on towing at some point, you will also need the Tekonsha wiring harness # 118582. Tekonsha makes the most reliable wiring harnesses out of all the...
view full answer... - How to Tow a Trailer with a 2016 Nissan SentraAccording to my research for your 2016 Nissan Sentra, this vehicle has a 1,000 lb towing capacity. Therefore, as long as your detailing car wash trailer does not exceed 1,000 lbs then you can use the Curt Trailer Hitch Receiver part # C11349 on your Sentra to tow the trailer. Please keep in mind that although the trailer hitch may be rated for 2,000 lbs, the vehicle is lower and will need to be the factor you abide by. Assuming the trailer's gross trailer weight (GTW) is within the range...
view full answer... - Recommended Ball Mount For The Curt Trailer Hitch # C11349 On A 2017 Nissan Sentra The Curt Class II Drawbar - 2-5/8 inch Rise, 3-1/4 inch Drop - 7-1/4 inch Long - 3,500 pounds # C45521 is combatable with The Curt Hitch # C11349. The mount works with both class 1 and class 2 Curt Hitches. This ball mount has a sturdy, steel construction and is corrosion-resistant because it has a black gloss powder coat finish. You will also need The 2 inch Hitch Ball - 3/4 inch Diameter x 2-1/8 inch Long Shank - Chrome - 3,500 pounds # C40018 and The Curt Hitch Pin and Clip for 1-1/4...
view full answer... - Why Is 2016 Nissan Sentra SR Model Not Compatible With Trailer Hitch Receiver?Both the Draw-Tite Sportframe Trailer Hitch Receiver # 24907 and the Curt # C11349 exclude the SR model. I reached out my contact at Curt and found out that the reason they are excluded is because of excess trim and an exhaust rattle. They don't have anything in the works for a compatible hitch. The modifications to make it work would include trimming portions of your fascia and doing some exhaust modification. If you are willing to do some customization, my contact said you can make...
view full answer... - Can 2018 Nissan Sentra Transport 250 lb Scooter/ChairThe problem with the hitches that fit the 2018 Nissan Sentra is that they are lower in capacity than what you'd need so you would have to tow a small trailer for your chair that weighs 250 lbs. Since the vehicle is lighter duty the hitches made for it like the Curt # C11349 only have a tongue weight capacity of 200 lbs. So to tow a trailer you'd need wiring to for the lighting which for that we have the # 118582 which is custom fit and very reliable. To use a carrier you'd have to go...
view full answer...
- Parts Needed to Tow Motorcycle Trailer with 2017 Nissan SentraI have a solution for you, but the Curt # 13555 is designed to fit on mid 2000s Honda CR-V's and not the 2017 Nissan Sentra, so you wouldn't be able to use that hitch. Instead, I recommend using the Curt # C11349 which is a confirmed fit on your vehicle. The Curt hitches tend to have a more durable powder coating on them to some of the other available hitches so it will hold up much better to rust and corrosion. In order to tow with your 2017 Nissan Sentra you will also need a wiring...
view full answer... - Recommended Trailer Hitch Receiver And Bike Rack For 2016 Nissan SentraI have another option for you, but you are correct that there are not any 2" trailer hitch receivers available for your 2016 Nissan Sentra. Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11349 which will fit your vehicle as long as it is not the SR model. Since the # C11349 is a Class I trailer hitch receiver you will need to use a bike rack that is compatible. I recommend the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel...
view full answer... - Does the Draw Tite Hitch part # 24907 Require Drilling to Install on a 2013 Nissan SentraYes, the Draw Tite Hitch part # 24907 that you referenced does require a little bit of drilling to install. For more info on the installation of this hitch check out the link I attached for the instructions. For a similar hitch that doesn't require drilling that is confirmed to fit your vehicle you would want the Curt Hitch part # C11349.
view full answer... - Does the Draw Tite Hitch # 24907 Require Drilling for Installation on a 2015 Nissan SentraYes, the installation of the Draw-Tite Class I hitch # 24907 on your 2015 Nissan Sentra DOES require drilling. All hitch options for your vehicle (as long as it is NOT the SR version) can be seen on the link provided. The Curt # C11349 is the one that does not require drilling but it may require some enlarging of the frame access holes with a rotary tool or file. The written instructions and a helpful hitch installation article are linked for you. If you plan to use a bike rack in your...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Jacob H
Video by:
Ethan H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Andre F.
11/15/2017
Alright. It does the job.