Does the Draw Tite Hitch # 24907 Require Drilling for Installation on a 2015 Nissan Sentra

Question

Question:

Does the Draw Tite Hitch part # 24907 Require Drilling to Install on a 2015 Nissan Sentra Thanks.

asked by: Juan C

0

Expert Reply:

Yes, the installation of the Draw-Tite Class I hitch # 24907 on your 2015 Nissan Sentra DOES require drilling. All hitch options for your vehicle (as long as it is NOT the SR version) can be seen on the link provided. The Curt # C11349 is the one that does not require drilling but it may require some enlarging of the frame access holes with a rotary tool or file. The written instructions and a helpful hitch installation article are linked for you.

If you plan to use a bike rack in your hitch please note you are limited to a 2-bike capacity on a Class I hitch. I have linked our main page for Class I-compatible bike racks and articles that cover how best to choose one for your car and your bikes.

expert reply by: Adam R

0

Ron N.

5/23/2020

Looking for trailer hitches for 2015 Nissan Sentra SR either 2 bike or 3 bike option.

Reply

Chris R.

5/26/2020

For the hitch itself I like the Curt # C11349 for your 2015 Nissan Sentra. You won't be able to load 3 bikes onto it since a Class I hitch can only handle two, but there are plenty of Class I approved options that will work really well. I highly recommend the Kuat Transfer # TS02B, which offers a sleek, wheel-mount carrier at a really nice price point.

Reply

Answer 1

Hi, For your 2013 Nissan Sentra SV I would use the Curt trailer hitch receiver custom fit #C11349 it does not require any drilling holes in the frame of your car. Just needs one hole made wider. You will also need a ball mount like the Curt Class II…

view full answer...

Answer 2

I have the solution we're looking for in the Saris SuperClamp #SA4025F. It can support 2 bikes up to 60lbs each, to lighten the bike's weight you can remove the battery. The SuperClamp has a lower mounted support bar than the T2 Pro which…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Does the Draw Tite Hitch # 24907 Require Drilling for Installation on a 2015 Nissan Sentra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching