Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents

See what our Experts say about this Ventline Accessories and Parts

• What Size Hole Does Ventline Switch part # BL0108-00 Fit
  The Ventline switch part # BL0108-00 that you referenced is designed to fit a rectangle hole that measures 3/4 inch by 1/2 inch. You'd want to measure the size of the hole that you currently have for switches to determine if this would fit.
  view full answer...
• Does the Replacement Screen # BVC0573-31 Have a Knockout for Installing a Fan Switch
  As long as your existing vent is part # V2092, V2110, V2094 or V2119, the replacement screen you mentioned would work great for you. As you can see in the photo I edited for you, the screen frame does feature a knockout that can be removed so that the switch like part # BL0108-00 may be installed.
  view full answer...
  
• Recommendations for a Trailer Mounted Utility Light for Night Boat Docking
  With a clear lens and 42 diodes, light # BUL90CB, would be plenty bright for your application. If you wired it into the running light circuit, you would just have to have the truck running lights on to power the light and not have to install a switch. Of course this would mean the light would be on all the time with the truck running lights. The electrical components in the light are sealed. The gasket offers further protection from the elements and would work well for your application. A...
  view full answer...
• How is Ventline Rocker Switch Replacement Accessed for Removal
  When removing a switch like the part # BL0108-00 from a Ventline roof vent there is a tab on the top and bottom of the switch that needs to be pressed for the switch to be able to be pushed out. You'd have to access it from above if you can't find a way to reach and and grab it from the topside.
  view full answer...
• Replacement Switch, Motor, and Fan Blade for a Venltine V2094 Roof Vent
  I got you covered, for your Ventline V2094 Roof Vent you'll need: -The Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 for the replacement fan blade, -The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 for the replacement motor, & -The Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 for the replacement switch.
  view full answer...
• Replacement Switch for RV Oval Porch and Utility Light with Switch # RVPL7C
  We do have a switch that may work for you though it is not an exact replacement for the one on # RVPL7C. Take a look at the mini-rocker switch, # BL0108-00. This is a simple on/off switch like the one on the light.
  view full answer...
• Replacement Switch Recommendation for a Ventline V2094 Powered Vent Fan
  I spoke to my contact at Ventline and she said the correct replacement switch for your Ventline Ventadome Roof Vent part # V2094SP-28 would be the Replacement Mini-Rocker Switch # BL0108-00. The Replacement Fan Switch # BV0199-02 that you referenced is for the Ventadome roof vent part number V2128 and would not work for you.
  view full answer...
• Interior LED Light Recommendation for an Enclosed 5 x 12 Foot V-Nose Trailer
  I would say that you would need a minimum of 6 of the Thinline Sealed LED Utility Light, # UCL65CB, to light up the inside of your enclosed trailer. Another option would be the LED Domed Utility Light, # ILL24CB. Two or three of these should provide sufficient lighting for your trailer. You would also need to wire them together, and run them to a switch, like # BL0108-00.
  view full answer...
• Will Optronics Trailer Light # ST90RB Light Up if Connected Directly to a 12 Volt Battery
  I can honestly say I have never had someone building a railroad crossbuck sign ask me a question! But, yes, the Optronics light # ST90RB will illuminate steady when connected to a 12 volt power source, like a battery, provided that the power source has a charge (if the battery runs low the light can dim). An LED light, like # STL90RB, will be brighter and use less power. It would not look as authentic, but it will consume less power and last longer. To be able to turn the light off and...
  view full answer...
• Control Panel Switch Replacement for Aux Battery on 2006 Fleetwood Jamboree
  Assuming that the existing switch that controls the auxiliary battery on this control panel is a 10 amp switch that is 3/4" long x 1/2" wide, the Replacement Rocker Switch # BL0108-00 will work to replace your broken switch. If you have a switch with a different amp rating or size, please let me know what those specs are and I will work to find an alternate recommendation.
  view full answer...
• Wiring a 3rd Brake Light and Dome Light for Camper Shell in a 2010 Ford F-350
  I do know that on a 2011 F-350, and probably the same for 2010, there is a wire under the hood on the driver side (blue/orange) that you can tap into to power a brake light on the camper shell. Take a look at the helpful link I have included that will take you to a question-and-answer page showing the wire. Use a circuit tester like # PTW2993 to test the wire to make sure it lights up only when the brake pedal is pressed. You can also consult the owner's manual for the location of the...
  view full answer...
• Replacement Switch for Ventline Roof Vent # V2094
  The correct replacement switch for your Ventline Ventadome Roof Vent V2094 would be the Replacement Rocker Switch # BL0108-00. This is a direct replacement for your old switch.
  view full answer...
• Replacement Switch and Fan Blade for the Replacement 12-Volt DC Fan Motor
  The switch is not included with the replacement fan motor # BVD0218-00. You can use switch # BL0108-00. For a fan blade there are 2 options that fit the motor depending on the type you need. First we have the replacement fan for Ventline Ventadome vents, # BVD0215-00. And we have the replacement for Vanair vents, # BVD0217-00.
  view full answer...
• How to Install a Ventline Ventadome Roof Vent with 12 Inch Fan Powered Lift
  You can utilize a power wall remote switch # VC0533-03-A or # VC0533-02-A (black or white). A rocker switch # BL0108-00 will work and you will need 2 of them. The installation kit # 344270KITW will come with screws, tape, and sealant. You will also need primary 16 gauge wire # DW02359-1 as well as a ceiling garnish # VA0445-35 I have attached a picture of wiring instructions for you as well. Installation Instructions for the Ventline Ventadome Roof Vent # V2119-601-00. 1.Mark desired...
  view full answer...
  
• Replacement Rocker Switch Compatibility with KIB Systems Monitor
  The Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 is a basic 10 amp switch allowing for a single function. It is designed to fit in a hole that is 3/4 inch by 1/2 inch. If that meets your criteria for your KIB Systems Monitor it should work just fine.
  view full answer...
• How To Wire A Powered Roof Vent In An Area That Doesn't Have Pre-Existing Wiring
  It is possible that the wires are already ran and you won't have to worry about running wire, it's worth looking into before committing to running wires; the best way to obtain this information is to get your VIN number, and contact the trailer manufacturer. If it turns out that your trailer isn't pre-rigged, then you can use a 12v power source like a battery, and run a black wire for your power and a white wire for your ground to your MaxxFan Deluxe # MA00-07500K. The black wire must...
  view full answer...
• Can 12 Volt Circuit on a 2012 GMC Yukon 7-Way be Used to Power Two 55-Watt Halogen Utility Lights
  The amperage draw of 2 of the 55-Watt Halogen Flood Beam Lights, # QH16CTS, is 9 amps. This should not be a problem for a 12 volt circuit on a 7-Pole. You can check the owners manual and/or the legend on the lid of the power distribution box for the fuse that powers the 12 volt circuit to see what it is rated for to be sure. The amperage rating for a factory 7-Way might also be listed in the vehicle owners manual. If connected to the 12 volt circuit from a trailer connector, the lights...
  view full answer...
• Replacement Rocker Switch For Ventline Range Hood PR
  For your Ventline Range Hood PR 100 CFM, you can use either use the Replacement Fan Switch for Ventline RV Range Hood # BL1194-00 if you need the large style rocker, or you can use the Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 if you need the small style rocker. Both of these switches are rated for 10A, 125/250VAC. Unfortunately neither of these switches are available in white
  view full answer...
• Installing 3rd Brake Light And Dome Light For Leer Canopy On 2011 Ford F-350
  To install the 3rd brake light and the dome light on your Leer canopy to your 2011 F-350 you will need to do a couple things. First, there is a wire under the hood on the driver side that is blue and orange. You can tap into that for the brake light on your camper. You will need a circuit tester like part # PTW2993 to test the wire and make sure it only shows power when the brake pedal is pressed. To connect the dome light, you can do that a couple different ways. The best way in my...
  view full answer...
  
• Can Hopkins Backup Sensor System # HM60100VA Be Mounted in Front on Kia Optima and Run Off a Switch
  The way the Hopkins Backup Sensor System, # HM60100VA, works as that when there is power applied to it, the sensors will begin trying to sense any obstructions. This ideal for the rear of the vehicle because it is meant to be attached to the reverse light circuit. You could wire it into a 12 volt ignition source (power that is only active with the vehicle running) and have it on a switch like # BL0108-00. You would need to wire the power wire from the systems to the switch and then have...
  view full answer...
• Replacement Switch that Can Fit Panel Cutout 1/2 inch by 3/4 inch
  The switch panel dimensions the switch # BL0108-00 is designed to fit measures 3/4 inch by 1/2 inch like the panel you have. This is a standard switch with two spade connectors so it should fit and work well for you.
  view full answer...
• Replacing Switch on Ventline Trailer Roof Vent
  Most likely the wires are soldered to the existing switch # BL0108-00 on your Ventline Roof Vent. To remove the wires you can either use a soldering iron like # PTW2000 on the wiring just enough that you can pull them free or if there is enough extra wiring you can simply cut them and reconnect them to the new switch after stripping the new ends.
  view full answer...
• Replacement RV Fan Motor Recommendation for Motor with MC385MG VD218 Written On It
  Motor # BVD0218-00 would be the correct replacement for what you have. The motor comes with new wires, a bracket, and hardware. If you needed the fan blade you would also want the part # BVD0215-00 and for the switch part # BL0108-00.
  view full answer...
• Recommended Replacement Rocker Switch For Ventline Range Hood
  Thanks for the picture! I have an option but The Replacement Rocker Switch # BL0108-00 is only capable of on-off and will not work for checking the capacity of your tanks. You will need the Mini-Momentary Switch # 37213725 which will fit the same 3/4"x1/2" switch cutout opening but is designed for the on-off-on function you are looking for.
  view full answer...
  

Do you have a question about this Accessories and Part?