Replacement RV Fan Motor Recommendation for Motor with MC385MG VD218 Written On It

Question

Question:

Hi. Looking for parts to replace my fan motor and blade. Existing motor is a Johnson MC385MG,VD218,105A,13.6V,1.2A, 3C2043. Thank you

asked by: Keith W

1

Helpful Expert Reply:

Motor # BVD0218-00 would be the correct replacement for what you have. The motor comes with new wires, a bracket, and hardware.

If you needed the fan blade you would also want the part # BVD0215-00 and for the switch part # BL0108-00.

expert reply by: Jameson C

1

Answer 1

Unfortunately, I wasn't able to find anything online regarding a replacement for that motor. You'll probably be best off contacting Johnson Supply directly to see if they can recommend a replacement for you. Another option if you can't…

view full answer...

Answer 2

The Camco Water Heater Element #CAM02143 is what you need for the SW6DEL water heater. According to our research this element will replace the heating element perfectly in your Suburban water heater. You can also use the Camco RV Water Heater Anode…

view full answer...

Answer 3

A fuse is not required in order to install the Replacement 12V DC Motor - Canada Approved #BVD0218-00C. You can also use this if you just want the added protection the fuse gives. The fan motors is the correct ones for a P-Series and include both the…

view full answer...

Answer 4

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

view full answer...

Answer 5

The fuse that was included with your BVD0218-00 motor is to ensure that it is up to specs for Canadian laws. If you live in the US then you can use part #BVD0218-00-R but if you live in Canada or you are wanting to use the fuse anyways then you need…

view full answer...

Answer 6

Motor #BVD0218-00 should be the correct replacement. The motor comes with new wires, a bracket, and hardware. The screws that hold the motor to its bracket can be accessed by removing the fan blade. It should just pull off of the motor shaft. You…

view full answer...

Answer 7

For the P series of range hoods the replacement motor is supposed to be the part #BVD0218-00. But based on what you said yours looks like you most likely need the part #BVD0278-00. The replacement switch would then be the part #BL0108-02.

view full answer...

Answer 8

The best place to mount your spare tire on your Trailmaster Tritoon Boat Trailer is on the frame just opposite of your trailer jack. I recommend using the CE Smith Offset Spare Tire Carrier #CE27310G which will fit trailer frames up to 3-1/2 inches…

view full answer...

Answer 9

I have a different option for you, but the Progressive Dynamics #PD4635LIV you were looking at is a replacement for the WFCO 8935 and not your WF-8735P. Instead you will need the Progressive Dynamics #PD4135K which is designed to replace your…

view full answer...

Answer 10

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...