PVC Grommet for 6-1/2" Oval Trailer Tail Lights
(831 reviews)
Price: $5.36
In Stock
PVC Grommet for 6-1/2" Oval Trailer Tail Lights
Item # a70gb
Retail:$7.23
Our Price: $5.36
You Save: 26%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (831)
- Q & A (0)
- Photos
Optronics Accessories and Parts - a70gb
- Trailer Lights
- Mounting Hardware
- Grommet
- Oval
- Optronics
- 6-1/2 Inch Long
An oval, black PVC grommet needed for flush mounting 6-1/2" oval lights. This PVC grommet gives shock mount protection that extends the life of the lamp. Along with the sealed light, a 3-wire pigtail is required to complete the installation.
Features:
- PVC grommet for flush mounting 6-1/2" oval lights
- Shock protection extends lamp life
- Open back gives easy access for wiring
- Requires a three-wire plug (A45PB or A47PB) along with the light to complete installation
- Dimensions: 7-5/8" L x 3-3/8" W x 1-1/8" D
Manufacturer Cross Reference
Grommet will work as an exact replacement for:
Wesbar # 226088
Truck Lite # 60700
Grote # 92420
Peterson # 421-18
Bargman # 40-06-020
Manufacturer Specifications
Black PVC grommet allows oval lights to be flush mounted. Provides shock mount to lengthen bulb life.
A70GB Optronics Rubber Grommet for 6-1/2" Oval Trailer Tail Lights
Alternate part number: A-70GB
Compare to Bargman 40-06-020
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
PVC Grommet for 6-1/2" Oval Trailer Tail Lights - a70gb
Average Customer Rating: 4.7 out of 5 stars (831 Customer Reviews)
An oval, black PVC grommet needed for flush mounting 6-1/2" oval lights. This PVC grommet gives shock mount protection that extends the life of the lamp. Along with the sealed light, a 3-wire pigtail is required to complete the installation.by: Lee07/21/2023
Having used etrailer in the past, I expected items as ordered, properly packaged, and with acceptable prices. The prices are now high and I could have shopped elsewhere, but I recall the staff reps were very helpful. And the canned excuse of "Covid" cannot apply here. The staff (Brittany) was indeed very helpful.
The box of lights arrived (about 20 units purchased). Surprised to find the box full of lights were not individually packaged and just thrown into a heap and covered with brown paper filler. Many of the lenses were scratched (none had the protective cover expected) and my order was to be 100% LED. I got a mixture of LED and incandescent light bulbs.
I was assured by the very helpful Brittany that the lights should be individually packaged and certainly should not include anything other than LEDs. So she shipped me a new order along with a return label for the first order received. The second order arrived early (arrived on a Friday and was told it would be the following Monday....and I'm thankful). Interestingly, the same 'tossed' parts were discovered, and was even worse because the lenses were tossed in separately from the light bases. With the same scratches, and even more individual parts. Contrary to what Brittany said, this is obviously the new way of doing things at etrailer. So I will take the collection of pieces thrown into a box and call it a day. However will not purchase from etrailer again. I will use the local vendor where I know I will pay less and the parts will be as provided by the factory and not heaped together in box with hopes that all electrical components will actually work.
I went the extra step of NOT doing this review because I knew it was just an odd circumstance and, as Brittany stated, my shipment will be used as a training guideline for what NOT to do. So I did not reply to their request for this review. Having opened the collection of parts again jammed into a box, I changed my mind. And thus this review.
by: Harvey 03/30/2024
Would definitely purchase again! I like utilizing these with my favorite style of trailer lighting.
by: Larry J04/07/2024
Grommet fit the LED Trailer light perfectly. However, the snug fit was a little loose inside the frame of my trailer. But, I think it will stay in place.
by: Brian 04/19/2024
works great for my trailer
by: Austin 03/17/2024
Worked perfectly for replacement in my magnum rack. Been in it for a year with no issues
by: David 01/02/2024
It was slightly too small for my trailer. I guess the standard cut out must have changed but it fit perfect inside my old grommet and then the light fit right in. No real problem, just had to improvise.
by: Carrol02/03/2024
great products, great value, fast shipping, I highly recommend etrailer.
by: Terry09/05/2023
Purchased LED lights to re-wire a 12-year old trailer. etrailer had all the lights/gaskets needed. Perfect fit to the original OEM lights.
by: Keith G.07/08/2017
Used these grommets to install lights on my cargo trailer that I pull behind my motorcycle. I wanted lights that would be sealed from leaking and these grommets allowed me to do that. Easy to use and they hold the lights as expected. Will definitely use these again if I need a similar set up.
by: Dale J.08/03/2016
Great product! My right brake/turn signal stopped working on my trailer, so I purchased a new ST70RB 6-1/2" oval trailer light, along with the wiring plug and this matching grommet, installed them in about 30 min, and it works great! The package arrived quickly and was packed nicely. I found out my fuse was blown on my 2016 Traverse for the right trailer stop/turn signal, but that was most likely from the old light which I think was leaking. I didn't know there was a fuse just for that so I learned something new. I will definitely purchase trailer products again from etrailer.com!
by: VWRUST08/04/2023
Ordered this to fit the glolight led trailer light as this light would not fit in to the one on my trailer securely.
by: 04/02/2024
Your shipping is a joke. I will never buy anything from you again.
by: 08/12/2023
Wiring is NOT conventional..
None of the harness wires matched up to the flat 4 wiring.
Red was yellow green was brown etc.
And wiring or color ceding was included with the 7 pin harness
by: oval trailer tail lights03/29/2014
Great looking taillights wish I had bought them sooner. thanks
by: James06/03/2023
The tail lights when packaged were not protected from rubbing against the box which got scratched during shipment. The trailer wiring from Curt appeared to be good quality, but the mounting bracket that secures the 4 pole flat plug does not hold it secure and it is loose. I will be sending it back.
by: Kelsey 03/29/2024
Perfect fit
by: Steve 07/07/2023
I ordered a 10LED tail light for my trailer with the grommet and received them very quickly. Took them out and put them on my trailer and they work just fine Thanks.
by: Pam 04/18/2024
Great service and timely shipping
by: J03/13/2024
Works as advertised.
by: Michael 07/31/2023
The grommets worked perfect. They appeared a little small until the light was installed and they filled up the space perfectly.
by: Chris 04/20/2024
Got the product two days early, and fit perfect!
by: GS05/13/2019
On a road trip with motorcycle trailer and trailer light with grommet flew out after hitting pot hole..Replacement light and grommet fit and works great. The grommet could be a bit more snug but will watch on next trip. Thank you so much.
by: David 02/19/2024
They were the right size. I received them promptly
by: Kendra 01/10/2024
Fit well enough and durable. I wish it fit slightly tighter but I suppose that's the way this standard was designed.
by: Russell06/08/2023
Did not fit properly in my 2012 Continental cargo car trailer. Was way to loose to install so just reused originals. Did not send back due to not enough money to warrant the hassles of a returning.
25
831
Show More Reviews
See what our Experts say about this Optronics Accessories and Parts
- How to Install Turn Signals/Marker Lights on Side of 5th WheelWe do have an option that would work for you, but it will take a bit of finagling to make it work for you. The turn signals on a trailer are combined on the same circuit as the brake lamps, so you'll need to use a vehicle to vehicle taillight converter like # 118158 to separate out the brake lamp signals so your side mounted directional/marker lamp doesn't illuminate with the brake pedal. For lamps, I'd recommend the # ST75AB. Because the converter isn't compatible with LED lamps, you'll...
view full answer... - Lights that Fit MT-BOX65 Trailer Light Mounting BoxWe had the chance to use the mounting box part # MT-BOX65 to install lights on a trailer (see attached install video) and we used the grommet # a70gb and the lights # ST70RB and we found they fit and worked well.
view full answer... - Is the Optronics # STL572RB Sealed LED Stop/Turn/Tail Light Sold as a Single Unit or PairThe Optronics # STL572RB Sealed LED Stop/Turn/Tail Light is sold as a single piece, not a pair. For complete installation you will require the corresponding rubber grommet, part # a70gb, which provides protection from mechanical stress, and the mounting bracket, part # BK70BB. Please note that in an existing 2 inch by 6-11/16 inch opening the grommet can be used to mount the light; if not the bracket can be used. You will also need the 3-wire pigtail lead in either the straight or right-angle...
view full answer... - What Size Hole to Mount Optronics 6-1/2 Inch Oval Taillight # STL22CCRBThe # STL22CCRB lamp you referred to is typically mounted in a grommet, like part # A70GB, which in turn is mounted in a bracket like part # 337LB1SS. If you were planning on cutting a hole to mount the lamp and grommet, the hole will need to measure 6-3/4 by 2-1/2 inches, as you can see in the diagram I provided. The easiest way to cut the hole would be to use a 2-1/2 inch hole saw, and cut two holes 6-3/4 inches apart (measured outside-to-outside). You could then use snips or a rotary...
view full answer...
- Mounting Grommet & Wiring for Optronics STL22AB 6-1/2-Inch Miro-Flex Turn Signal & Parking LightYes, the Optronics 6-1/2-Inch Miro-Flex Trailer Turn Signal and Parking Light # STL22AB will fit perfectly into your Peterson 421 grommet. This Peterson grommet is one of the parts for which our grommet # a70gb is a direct replacement, in case you ever need one. You can use 3-wire plugs such as # A47PB or # A45PB.
view full answer... - Which Trailer Wiring Connector Has a Pin for Reverse LightsIn order to add reverse lights to a trailer would would need to have a 7-Way on the trailer, like # 50-67-103, and a 7-Way on the vehicle. On the vehicle side, if you are looking at the back of the 7-Way where the wires connect, the reverse light circuit is the center pin. It will need to connect to a reverse light wire behind one of the vehicle tail lights. On the trailer side the matching pin is again the center pin. So from that pin, you would route wire to reverse lights. Reverse lights...
view full answer... - What Grommet Does Tail Light STL12RB FitWhile I don't have any way of knowing what grommet you have, but the Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens # STL12RB fits the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb. If you already have a 6-1/2" x 2-1/4" tall oval trailer light and grommet, then yes, you can replace your light with the Optronics LED Trailer Tail Light # STL12RB. The only other thing you will need is the 3-Wire Pigtail for Optronics Trailer Lights # A45PB
view full answer... - Recessed Mount Version of the Optronics Clearance Light BUL12CFBFor a version of the # BUL12CFB that does not have the flange you would want the # BUL72CB. Then for a grommet you would want the part # a70gb.
view full answer... - Recommendation of Turn Signal and Parking Light for Off-road useI recommend the amber trailer turn signal and parking light # ST70AB as it's sealed and waterproof. The rubber grommet # a70gb will provide shock mount protection extending the life of the lamp. The Optronics # MCL157AB could possibly be used as a turn signal but not recommended. The grommet you referred # A56GB would work as it will provide shock protection especially that you will be off-road. It will seat properly once the light is plugged into the grommet. The LED equivalent is amber...
view full answer... - Why is the Optronics LED Clear Oval Trailer Utility Light # BUL72CB Not Certified as a Backup LightThe Sealed, 6-1/2 inch Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear, item # BUL78CB, does not meet DOT FMVSS 108 requirements, for backup lights so it cannot be sold as a backup light. That does not mean that the light cannot be used in that situation for applications where a DOT requirement does not need to be met. In short, the Trailer Utility Light, item # BUL78CB, can be used as a backup light, but if your trailer needs to meet DOT requirements you will need...
view full answer... - How To Measure and Replace Oval Flush Mount Trailer LightsGreat question! For oval trailer lights you want to measure the lens width and length from edge to edge. For example, Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens Item # STL72RB. The most common flush mount trailer lights are 6 1/2" x 2" I also recommend PVC Grommet for 6-1/2" Oval Trailer Tail Lights Item # a70gb I added a video link to help walk you through the instillation
view full answer... - Mounting Dimensions of the Optronics 6-1/2 Inch Trailer Light # ST70RBI took a few measurements for you that I think will help. I have attached a diagram and made a short video for you showing the dimensions and the light. I believe this light will work with your bumper without having to cut out a hole in the back of the bumper. When the light is mounted in the grommet, portion of the light that extends past the wall of the bumper will only be 1-11/32 inches. You should have no problem installing this in your 2 inch x 4 inch bumper.
view full answer...
- Could the Rubber Grommet # A70GB be Installed in 5/16 in Thick MaterialThe Rubber Grommet # A70GB should have no problem being used in a material that is 5/16 of an inch in thickness as long as the hole is cut the proper shape. To see the dimensions that the hole will need to be check out the picture I attached.
view full answer...
- How To Confirm Fit of the Fusion LED Trailer Tail LightThe Fusion LED Trailer Tail Light part # STL211RB is designed to be used with the PVC Grommet part # a70gb which fits a rough opening of 6-11/16" x 2-5/8". Therefore, if this is what you have or close then it will work well for you. That said, this is a pretty standard size oval tail light which is classified as 6-1/2" wide so if this is what you have then odds are it will work. Please note, you'll also need the Right Angle 3-Wire Pigtail part # A47PB. I was not able to cross-reference...
view full answer... - Do I Need Resistors When Installing the Optronics LED Backup Light item # BUL52CB?No, you shouldn't need a resistor like item # DI34ZR when installing the Optronics LED Backup Light for Trucks or Trailers item # BUL52CB. I say shouldn't because if you're installing these lights on a trailer your tow vehicle should supply plenty of power for them to function correctly. If you're installing these on a vehicle for additional lighting you will most likely need one on each light. To install the Optronics LED Backup Light item # BUL52CB you will want to use the PVC Grommet...
view full answer... - Replacement Trailer Taillight for Texas Pride Car HaulerI looked up pictures of Texas Pride car haulers and based on what I saw the Optronics LED Trailer Tail Light part # STL72RB is the correct replacement. If you need the grommet too you'd want the part # a70gb.
view full answer... - Recommended Replacement Recessed Mount Oval Tail Lights for Box TrailerThe Optronics Fleet LED Trailer Tail Lights part # TLL12RK which install inside a 6-11/16" x 2-5/8" opening is the closest option we have for you and it comes with the needed grommet and pigtail for installation.
view full answer... - LED Trailer Tail Light Recommendations for a Boat TrailerThe Sealed, Miro-Flex, Thin Line, LED Lights, # MCL63CRB, are DOT approved as Trailer Marker, Clearance or ID Lights only, so you would not be able to use them as tail lights. A similar light in shape and size that would work for you is the Miro-Flex, Waterproof, Rectangular, LED Trailer Light, # STL33RB. You would also need a wiring harness like # A45PB, and a grommet, # A33GB. Or, if a rounded light is acceptable, you can go with # STL70RB, with wiring # A45PB and Grommet # a70gb.
view full answer... - Availability of Replacement Oval Grommet for Use with Cargo Carrier Light Kit # 20174We do indeed offer a stand-alone replacement oval rubber grommet for use with 6-1/2-inch trailer lights such as those included in Light Kit # 20174. The part # a70gb is sold individually and the linked photo gives you its measurements so you can be sure it fits before ordering.
view full answer...
- Best Location For Mounting Light Brackets On Curt Hitch Cargo CarrierUnfortunately, we do not have any photos of the # BK70BB installed on a cargo basket. It can be installed vertically or horizontally, depending on the item it is being mounted to. I do recommend mounting it so that the wires for a connector at the back of the light are safe and not in danger of being damaged. My recommendation is to mount it to the underside of the top rail on the carrier. This does give it some protection. I recommend the light kit, part # 98174LED. This kit includes...
view full answer... - Trailer Reverse Lights That Do Not Require A Hole For Recessed MountingFor white led backup lights with a bracket, you can use the Trailer Light Mounting Bracket # BK70BB with a PVC Grommet # a70gb and the 6-1/2" backup light of your choosing. I recommend the Light Guide LED Truck/Trailer Light # BUL602CRB. These lights both act as a backup light as well as a provide an additional tail light to ensure that the you are clearly seen. You will need a 3-Wire Pigtail # A45PB to connect the light to the wiring on your trailer. We also have either the Hot-Line...
view full answer... - Amber LED Trailer Tail Light Recommendation for an Offroad BuggyFor an LED light, the more diodes the brighter it will be. The Single-Face LED Parking/Turn Signal Light, # STL90AB, has 31 large diodes which is among the highest so it should be bright enough for you. Another option is the LED Trailer Turn Signal and Parking Light, # STL70AB, which is a 6-1/2 inch oval. It has 48 smaller diodes. For this light you would also nee a pig tail, # A46PB, and a grommet, # a70gb.
view full answer... - Reverse Light Recommendations for a Motorcycle TrailerIf the trailer is one designed to carry a motorcycle, you can add some reverse lights to it. I recommend two lights, one on each side of the rear of the trailer. There are better suited lights for this application. I recommend the Sealed, 6-1/2 inch LED Clear Oval Trailer Utility Light, 10 Diode, # BUL72CB. These lights are submersible. You will also need a rubber grommet, # a70gb, for each light, and a pigtail, # A45CB, for each light. To mount the lights, you can use Mounting Bracket...
view full answer... - Trailer Replacement Light for a Model J-65 Tail Lamp I have a couple of options for replacement lights. The larger one is going to be an 1/8 of an inch off of your Model J-65 tail lamp. It is the Optronics Trailer Tail Light item # ST70RB you were looking at. This light is 6-1/2" x 2-1/4" and has a 3 prong plug. I have linked a diagram below that shows the dimensions of this light. We do have a slightly smaller light that is 6-1/2" wide by 2-5/16" tall it is the Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Andrew L
Installed by:
Nicholas E
Installed by:
Cole B
Installed by:
Bradley B
Video by:
Kathleen M
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Oval L.
3/21/2015
just like a TIMEX watch takes a licking