Replacement Nylon Sliders for Taylor Made Bimini Top Slide Assemblies - Qty 2

Video Transcript for Review of Taylor Made Bimini Top Parts - Slide Assembly Replacement Parts - 3695854

Michael: Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at the replacement nylon sliders for your Taylor Made Bimini top slide assemblies.These are going to be an exact replacement from Taylor Made, so you don't have to worry about compatibility issues or fitting correctly. These are going to be exactly the same as the originals.So they will slide right into those tracks, allow you to attach your standard deck hinge so that you can move your Bimini top to different pitches or close it, depending on what you're needing to do.These are the same, corrosion-proof nylon construction as the original, and they're made here in the USA. So you can trust they're made to the same high quality standards that we've come to know and trust for products that are made here in the US.And just to give you a little bit more reassurance that this is going to sit for your application. I'm going to say that this is right at about five-eighths of an inch wide, and then probably two and three-eighths of an inch long. And total height here, I'm looking at right about quarter of an inch, to my measurement.So it should be the exact same fit as your original.

So if you have damaged or lost your original sliders for your Taylor Made, Bimini top slide assembly, these are going to be the pieces that you need.You are going to get two of them. So if you've only lost or broken one, you'll have a backup just in case that happens again. Or if you need one for each side, you're going to have two here.So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..