Summer Starts Here - Save up to 70%
Replacement jaw slide lets you connect the bow of the bimini top on your pontoon boat to a support pole. Adjust the slide along the length of your 1" square pole to properly position your bimini frame. Nylon is corrosion-proof.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the tailor-made bending top jaw slide. This is going to work for your 1 inch by 1 inch square Bimini top holes. Will allow you to connect this to your support pole and then connect an eye end on your frame so that you can adjust your Bimini top. Do have an eye in here to show you how that will work.
Just simply slide in the eye in there, and then pass your bolt back through. And we'll tighten that down with a flat head screw there, and that will allow you to pivot and adjust. You can slide your jaw slide up and down and you'll tighten it down with the flathead bolt on the back there so it will stay in place in your eye end. We'll be able to pivot and accommodate opening and closing and adjusting your Bimini top.This jaw slide is a black nylon construction, so it's going to be very corrosion resistant. You don't have to worry about rust or anything like that, even freshwater or saltwater, and it'll hold up well, do a good job for you.
So if you are in the market for a Bimini top jaw slide for your 1 inch by 1 inch square pontoon Bimini top holes, this is going to be a great option for you. It's made here in the USA, so you can trust me to the high quality standards that we've come to know and trust for products that are made here in the US, so I think this is going to do a really good job for you, allow you to operate that Bimini top again.That's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Replacement jaw slide lets you connect the bow of the bimini top on your pontoon boat to a support pole. Adjust the slide along the length of your 1" square pole to properly position your bimini frame. Nylon is corrosion-proof.I thought I had to throw the bimi away. This will fix it.
it worked prefect for my pontoon.
good parts
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.